nbsSigLaneLaneChannelBand
NBS-SIGLANE-MIB ·
.1.3.6.1.4.1.629.236.20.1.1.12
Object
column
NBS-CMMCENUM-MIBNbsCmmcChannelBand
The ITU grid labels DWDM channels with a letter 'band' and a
numeric channel. Within this mib, the band is indicated by
this object, and the channel number is shown in the object
nbsOsaChannelNumber.
Frequencies of at least 180100 GHz but less than 190100 GHz
are considered the L spectrum, and frequencies of at least
190100 but less than 200100 GHz are considered the C spectrum.
Frequencies evenly divisible by 100 GHz are designated with
a 'C' or 'L' prepended to the channel number. Frequencies
that are offset by 50 GHz are designated 'H' within the C
spectrum, and 'Q' within the L spectrum.
Context
- MIB
- NBS-SIGLANE-MIB
- OID
.1.3.6.1.4.1.629.236.20.1.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- nbsSigLaneLaneEntry
- Table
- nbsSigLaneLaneTable
- Siblings
- 21
Syntax
NBS-CMMCENUM-MIBNbsCmmcChannelBand
- Source
- NBS-CMMCENUM-MIBNbsCmmcChannelBand
- Base type
Enumeration
Values & Constraints
Type Values
0 | notSupported |
1 | cBand |
2 | hBand |
3 | lBand |
4 | qBand |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nbsSigLaneLaneIfIndex The index to the MIB-II Interface table entry which contains this
(fiber/lambda) lane. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.629.236.20.1.1.1 |
| nbsSigLaneLaneFrequency The nominal frequency, in MHz. | column | NBS-MIBNbsTcMHz | .1.3.6.1.4.1.629.236.20.1.1.10 |
| nbsSigLaneLaneWavelengthX The nominal wavelength (nanometers) is an ASCII string
to be human-readable. CWDM wavelengths use 4 digits.
DWDM wavelengths use seven digits and a decimal point.
N… | column | OctetString | .1.3.6.1.4.1.629.236.20.1.1.11 |
| nbsSigLaneLaneChannelNumber The channel number can be derived by extracting the two middle
digits from the six digit frequency in GHz. | column | Integer32 | .1.3.6.1.4.1.629.236.20.1.1.13 |
| nbsSigLaneLaneTxDisable This object controls the lane's transmitter:
notSupported(1), returned if transmitter not configurable, i.e. always
enabled;
no(2), to enable the t… | column | Enumeration | .1.3.6.1.4.1.629.236.20.1.1.14 |
| nbsSigLaneLaneFaultsCaps This object specifies the supported nbsSigLaneLaneFaultsOper bit(s).
A zero length OCTET STRING indicates this information is not provided. | column | OctetString | .1.3.6.1.4.1.629.236.20.1.1.15 |
| nbsSigLaneLaneFaultsOper This object provides operational lane fault conditions:
The first octet provides Tx information:
Bit 0: Tx LOS if set
Bit 1: T… | column | OctetString | .1.3.6.1.4.1.629.236.20.1.1.16 |
| nbsSigLaneLaneIndex Ordinal index for the signaling lane in a port:
1..4 for QSFP[+] 4 x 10G
1..4 for CFP 4 x 25G
1..4 for CFP 4 x 28G
1..10 for CFP 10 x 10G | column | Integer32 | .1.3.6.1.4.1.629.236.20.1.1.2 |
| nbsSigLaneLaneTxPowerLevel This object indicates the status of this lane's
measured received power, reported in nbsSigLaneLaneTxPower:
notSupported(1), if (nbsSigLaneLaneTxPower = 0x80000000)… | column | Enumeration | .1.3.6.1.4.1.629.236.20.1.1.20 |
| nbsSigLaneLaneTxPower The output power (in milli dBm) of this lane.
Not supported value: 0x80000000 | column | NBS-MIBNbsTcMilliDb | .1.3.6.1.4.1.629.236.20.1.1.21 |
| nbsSigLaneLaneTxPowerAdmin The desired output power (in milli dBm) for this lane; the value
should be within the supported bounds of the given pluggable.
For a CFP/CFP2 supporting configurable Tx power, thi… | column | NBS-MIBNbsTcMilliDb | .1.3.6.1.4.1.629.236.20.1.1.22 |
| nbsSigLaneLaneRxPowerLevel This object indicates the status of this lane's
measured received power, reported in nbsSigLaneLaneRxPower:
notSupported(1), if (nbsSigLaneLaneRxPower = 0x80000000)… | column | Enumeration | .1.3.6.1.4.1.629.236.20.1.1.30 |
| nbsSigLaneLaneRxPower The received optical power (in milli dBm) of this lane.
Not supported value: 0x80000000 | column | NBS-MIBNbsTcMilliDb | .1.3.6.1.4.1.629.236.20.1.1.31 |
| nbsSigLaneLaneBiasAmpsLevel This object indicates the status of laser bias current,
as reported in nbsSigLaneLaneBiasAmps:
notSupported(1), if (nbsSigLaneLaneBiasAmps = -1);
low… | column | Enumeration | .1.3.6.1.4.1.629.236.20.1.1.40 |
| nbsSigLaneLaneBiasAmps The bias current (in microAmps) of this lane.
Not supported value: -1 | column | NBS-MIBNbsTcMicroAmp | .1.3.6.1.4.1.629.236.20.1.1.41 |
| nbsSigLaneLaneLaserTempLevel This object indicates the status of laser temperature,
as reported in nbsSigLaneLaneLaserTemp:
notSupported(1), if (nbsSigLaneLaneLaserTemp = 0x80000000);
… | column | Enumeration | .1.3.6.1.4.1.629.236.20.1.1.50 |
| nbsSigLaneLaneLaserTemp The temperature (in degrees Celsius) of this lane.
Not supported value: 0x80000000 | column | NBS-MIBNbsTcTemperature | .1.3.6.1.4.1.629.236.20.1.1.51 |
| nbsSigLaneLaneEthTxAllOctets The count of bytes in all Ethernet frames transmitted.
Not supported value: 0xFFFFFFFFFFFFFFFF | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.629.236.20.1.1.60 |
| nbsSigLaneLaneEthTxAllFrames The count of all Ethernet frames transmitted.
Not supported value: 0xFFFFFFFFFFFFFFFF | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.629.236.20.1.1.61 |
| nbsSigLaneLaneEthRxAllOctets The count of bytes in all Ethernet frames received.
Not supported value: 0xFFFFFFFFFFFFFFFF | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.629.236.20.1.1.70 |
| nbsSigLaneLaneEthRxAllFrames The count of all Ethernet frames received.
Not supported value: 0xFFFFFFFFFFFFFFFF | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.629.236.20.1.1.71 |