nbsSysReadComunity
NBASE-G1-MIB ·
.1.3.6.1.4.1.629.1.3.8
Object
scalar
mandatory
r/w
OctetString
The SNMP Agent Administrative value of the read community string. This value is stored in the system NVRAM. It will take effect after a system reset
Context
- MIB
- NBASE-G1-MIB
- OID
.1.3.6.1.4.1.629.1.3.8- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- nbsSysSnmpCfg
- Siblings
- 23
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-256
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nbsSysIpAddr mandatory The SNMP Agent Administrative value of the IP Address for the
in-band access.
This value is stored in the system NVRAM.
The current operational IP Adress may be obtaine… | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.629.1.3.1 |
| nbsSysBootpEnable mandatory The SNMP Agent value for the activation of the BOOTP process.
This value is stored in the system NVRAM also and will be
preserved over system resets and power cycles. | scalar | Enumeration | .1.3.6.1.4.1.629.1.3.10 |
| nbsSysTrapTblMaxSize mandatory The maximum size (number of rows) allowed in the trap table | scalar | Integer32 | .1.3.6.1.4.1.629.1.3.11 |
| nbsSysTrapTable mandatory A table of managers to whom will the traps generated by the
SNMP agent will be sent.
It represents the current operational table as well as the
NVRAM saved table. The entries in t… | table | - | .1.3.6.1.4.1.629.1.3.12 |
| nbsSysTftpSwFileName mandatory The SNMP Agent Software File Name. This is the remote
file name string provided to the TFTP client application
when starting a Firmware Update process.
This value is stored in the… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.629.1.3.13 |
| nbsSysTftpParFileName mandatory The SNMP Agent Parameters File Name. This is the remote
file name string provided to the TFTP server application
when using the BOOTP/TFTP processin order to configure the
SNMP Ag… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.629.1.3.14 |
| nbsSysSerialLineMode mandatory The mode in which the serial line is used:
by the local Administrative Interface, or as a SLIP line.
Note that setting this object to adminIf(1) value while
in SLIP mode will abor… | scalar | Enumeration | .1.3.6.1.4.1.629.1.3.15 |
| nbsSysSerialSlipBaudRate mandatory The Serial Line Baud Rate when in SLIP Mode.
This value is stored in the system NVRAM as well as in
the SNMP Agent current configuration. | scalar | Enumeration | .1.3.6.1.4.1.629.1.3.16 |
| nbsSysTelnetSession mandatory This object indicates if there is any TELNET session in
progress. | scalar | Enumeration | .1.3.6.1.4.1.629.1.3.17 |
| nbsSysPing | node | - | .1.3.6.1.4.1.629.1.3.18 |
| nbsSysTelnetHost mandatory This object indicates the remote IP host that connected
to the local device. It is 0.0.0.0 if there is no active
Telnet session | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.629.1.3.19 |
| nbsSysNetMask mandatory The SNMP Agent Administrative value of the subnet mask for
the in-band access.
This value is stored in the system NVRAM.
The current operational IP Adress may be obtain… | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.629.1.3.2 |
| nbsSysTftpRswFileName mandatory The SNMP Agent Remote Software File Name. This is the remote
file name string provided to the TFTP Server application
by the SNMP Agent TFTP client, when initiating a Firmware Upd… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.629.1.3.20 |
| nbsSysTftpServerIP mandatory This is the IP Address of the TFTP Server serving the
software/parameter download/upload process, initiated
by the SNMP agent.
It is 0.0.0.0, if there is no TFTP server is defined | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.629.1.3.21 |
| nbsSysInitDownload mandatory This is used to initiate a download session from the above
TFTP server.
Note that the only writeable value is active(1) and activeAppl(3),
if no session is active at this moment. | scalar | Enumeration | .1.3.6.1.4.1.629.1.3.22 |
| nbsSysParDownload mandatory This is used to initiate a parameter download session from the above
TFTP server.
Note that the only writeable value is active(1), if no session is
active at this moment. | scalar | Enumeration | .1.3.6.1.4.1.629.1.3.23 |
| nbsSysParUpload mandatory This is used to initiate a parameter upload session to the above
TFTP server.
Note that the only writeable value is active(1), if no session is
active at this moment. | scalar | Enumeration | .1.3.6.1.4.1.629.1.3.24 |
| nbsSysBcastAddr mandatory The SNMP Agent Administrative value of the IP Broadcast
Address for the in-band access.
This value is stored in the system NVRAM.
The current operational IP Adress may … | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.629.1.3.3 |
| nbsSysObIpAddr mandatory The SNMP Agent Administrative value of the IP Address for the
out-band access.
This value is stored in the system NVRAM.
The current operational IP Adress may be obtain… | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.629.1.3.4 |
| nbsSysObNetMask mandatory The SNMP Agent Administrative value of the subnet mask for
the out-band access.
This value is stored in the system NVRAM.
The current operational IP Adress may be obtai… | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.629.1.3.5 |
| nbsSysObBcastAddr mandatory The SNMP Agent Administrative value of the IP Broadcast
Address for the in-band access.
This value is stored in the system NVRAM.
The current operational IP Adress may … | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.629.1.3.6 |
| nbsSysDefaultGateway mandatory The SNMP Agent Administrative value of the Default Gateway.
This value is stored in the system NVRAM.
The current operational Default Gateway IP Adress may be
obtained … | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.629.1.3.7 |
| nbsSysWriteComunity mandatory The SNMP Agent Administrative value of the write community
string. This value is stored in the system NVRAM.
It will take effect after a system reset.
The object may not be read … | scalar | OctetString | .1.3.6.1.4.1.629.1.3.9 |