nbsSysDefaultGateway

NBASE-G1-MIB · .1.3.6.1.4.1.629.1.3.7
MIB view Table view

Object

scalar mandatory r/w RFC1155-SMIIpAddress 
The SNMP Agent Administrative value of the Default Gateway.
          
This value is stored in the system NVRAM.
The current operational Default Gateway IP Adress may be
obtained by accessing ipRouteNextHop object of the 0.0.0.0
entry in the ipRouteTable.
          
If the system has no current operational Default Gateway
IP Address, then this value takes effect immediately.
Otherwise it will take effect after a system reset

Context

MIB
NBASE-G1-MIB
OID
.1.3.6.1.4.1.629.1.3.7
Type
scalar
Access
readwrite
Status
mandatory
Parent
nbsSysSnmpCfg
Siblings
23

Syntax

RFC1155-SMIIpAddress
Source
RFC1155-SMIIpAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 4

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
nbsSysIpAddr mandatory
The SNMP Agent Administrative value of the IP Address for the in-band access. This value is stored in the system NVRAM. The current operational IP Adress may be obtaine…
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.629.1.3.1
nbsSysBootpEnable mandatory
The SNMP Agent value for the activation of the BOOTP process. This value is stored in the system NVRAM also and will be preserved over system resets and power cycles.
scalarEnumeration.1.3.6.1.4.1.629.1.3.10
nbsSysTrapTblMaxSize mandatory
The maximum size (number of rows) allowed in the trap table
scalarInteger32.1.3.6.1.4.1.629.1.3.11
nbsSysTrapTable mandatory
A table of managers to whom will the traps generated by the SNMP agent will be sent. It represents the current operational table as well as the NVRAM saved table. The entries in t…
table-.1.3.6.1.4.1.629.1.3.12
nbsSysTftpSwFileName mandatory
The SNMP Agent Software File Name. This is the remote file name string provided to the TFTP client application when starting a Firmware Update process. This value is stored in the…
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.629.1.3.13
nbsSysTftpParFileName mandatory
The SNMP Agent Parameters File Name. This is the remote file name string provided to the TFTP server application when using the BOOTP/TFTP processin order to configure the SNMP Ag…
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.629.1.3.14
nbsSysSerialLineMode mandatory
The mode in which the serial line is used: by the local Administrative Interface, or as a SLIP line. Note that setting this object to adminIf(1) value while in SLIP mode will abor…
scalarEnumeration.1.3.6.1.4.1.629.1.3.15
nbsSysSerialSlipBaudRate mandatory
The Serial Line Baud Rate when in SLIP Mode. This value is stored in the system NVRAM as well as in the SNMP Agent current configuration.
scalarEnumeration.1.3.6.1.4.1.629.1.3.16
nbsSysTelnetSession mandatory
This object indicates if there is any TELNET session in progress.
scalarEnumeration.1.3.6.1.4.1.629.1.3.17
nbsSysPingnode-.1.3.6.1.4.1.629.1.3.18
nbsSysTelnetHost mandatory
This object indicates the remote IP host that connected to the local device. It is 0.0.0.0 if there is no active Telnet session
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.629.1.3.19
nbsSysNetMask mandatory
The SNMP Agent Administrative value of the subnet mask for the in-band access. This value is stored in the system NVRAM. The current operational IP Adress may be obtain…
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.629.1.3.2
nbsSysTftpRswFileName mandatory
The SNMP Agent Remote Software File Name. This is the remote file name string provided to the TFTP Server application by the SNMP Agent TFTP client, when initiating a Firmware Upd…
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.629.1.3.20
nbsSysTftpServerIP mandatory
This is the IP Address of the TFTP Server serving the software/parameter download/upload process, initiated by the SNMP agent. It is 0.0.0.0, if there is no TFTP server is defined
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.629.1.3.21
nbsSysInitDownload mandatory
This is used to initiate a download session from the above TFTP server. Note that the only writeable value is active(1) and activeAppl(3), if no session is active at this moment.
scalarEnumeration.1.3.6.1.4.1.629.1.3.22
nbsSysParDownload mandatory
This is used to initiate a parameter download session from the above TFTP server. Note that the only writeable value is active(1), if no session is active at this moment.
scalarEnumeration.1.3.6.1.4.1.629.1.3.23
nbsSysParUpload mandatory
This is used to initiate a parameter upload session to the above TFTP server. Note that the only writeable value is active(1), if no session is active at this moment.
scalarEnumeration.1.3.6.1.4.1.629.1.3.24
nbsSysBcastAddr mandatory
The SNMP Agent Administrative value of the IP Broadcast Address for the in-band access. This value is stored in the system NVRAM. The current operational IP Adress may …
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.629.1.3.3
nbsSysObIpAddr mandatory
The SNMP Agent Administrative value of the IP Address for the out-band access. This value is stored in the system NVRAM. The current operational IP Adress may be obtain…
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.629.1.3.4
nbsSysObNetMask mandatory
The SNMP Agent Administrative value of the subnet mask for the out-band access. This value is stored in the system NVRAM. The current operational IP Adress may be obtai…
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.629.1.3.5
nbsSysObBcastAddr mandatory
The SNMP Agent Administrative value of the IP Broadcast Address for the in-band access. This value is stored in the system NVRAM. The current operational IP Adress may …
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.629.1.3.6
nbsSysReadComunity mandatory
The SNMP Agent Administrative value of the read community string. This value is stored in the system NVRAM. It will take effect after a system reset
scalarOctetString.1.3.6.1.4.1.629.1.3.8
nbsSysWriteComunity mandatory
The SNMP Agent Administrative value of the write community string. This value is stored in the system NVRAM. It will take effect after a system reset. The object may not be read …
scalarOctetString.1.3.6.1.4.1.629.1.3.9