nbsPortCfgPortDelay
NBASE-G1-MIB ·
.1.3.6.1.4.1.629.1.4.1.1.8
Object
column
mandatory
r/w
Integer32
The port forwarding delay expressed in bytes, with an acceptable range of 6..64 bytes. The default is 64 bytes. This object is supported only by the NH204-AT device
Context
- MIB
- NBASE-G1-MIB
- OID
.1.3.6.1.4.1.629.1.4.1.1.8- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- nbsPortCfgEntry
- Table
- nbsPortCfgTable
- Siblings
- 10
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nbsPortCfgIndex mandatory A unique value for each switched port. Its value ranges from
1 to the value of nbsSysPortsNumber. | column | Integer32 | .1.3.6.1.4.1.629.1.4.1.1.1 |
| nbsPortCfgEnable mandatory Port Enable/Disable | column | Enumeration | .1.3.6.1.4.1.629.1.4.1.1.10 |
| nbsPortCfgIsvpMode mandatory The Inter-Switch Virtual Mode of this port. nonIsvp(3)
means the port does not support this mode of operation.
Access(1) means the port is in Access mode. Trunk(2) means
the port… | column | Enumeration | .1.3.6.1.4.1.629.1.4.1.1.11 |
| nbsPortCfgLanType mandatory The port LAN type that is installed (if exists). | column | Enumeration | .1.3.6.1.4.1.629.1.4.1.1.2 |
| nbsPortCfgIfType mandatory The port physical interface that is installed (if any). | column | Enumeration | .1.3.6.1.4.1.629.1.4.1.1.3 |
| nbsPortCfgPortSelect mandatory The port physical interface type selection.
For regular 10 Mbps Ethernet Ports, the default value
is Auto Select.
100 Base-Tx ports do not support more than one type of
physical i… | column | Enumeration | .1.3.6.1.4.1.629.1.4.1.1.4 |
| nbsPortCfgIfLink mandatory The link integrity status. This object is rellevant
for a port of type Twisted Pair or Fiber Optic,
10 or 100 Mbps | column | Enumeration | .1.3.6.1.4.1.629.1.4.1.1.5 |
| nbsPortCfgPortFctrl mandatory The port flow control mode selection: enable (default )
or disable | column | Enumeration | .1.3.6.1.4.1.629.1.4.1.1.6 |
| nbsPortCfgPortDplex mandatory The port dplex mode selection: halfDuplex(1) - default
or fullDuplex(2) | column | Enumeration | .1.3.6.1.4.1.629.1.4.1.1.7 |
| nbsPortCfgSpeedSelect mandatory The Ethernet Port speed selection in the case of a
different 'nbsPortCfgLanType' Ethernet ports. | column | Enumeration | .1.3.6.1.4.1.629.1.4.1.1.9 |