nbsPortCfgLanType
NBASE-G1-MIB ·
.1.3.6.1.4.1.629.1.4.1.1.2
Object
column
mandatory
Enumeration
The port LAN type that is installed (if exists).
Context
- MIB
- NBASE-G1-MIB
- OID
.1.3.6.1.4.1.629.1.4.1.1.2- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- nbsPortCfgEntry
- Table
- nbsPortCfgTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | none |
2 | eth10 |
3 | eth100 |
4 | eth10or100 |
5 | eth100B |
6 | eth1000B |
7 | atmLane |
8 | eth100Grp |
9 | eth10or100Grp |
10 | fddi |
11 | eth100or1000 |
12 | eth10hpna |
13 | eth100or1000amp |
14 | eth10or100overVDSL |
15 | ethSFP |
16 | eth10or100or1000 |
30 | ethSFP100 |
40 | ethXFP |
50 | ethComboDualMode |
51 | ethComboTriMode |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nbsPortCfgIndex mandatory A unique value for each switched port. Its value ranges from
1 to the value of nbsSysPortsNumber. | column | Integer32 | .1.3.6.1.4.1.629.1.4.1.1.1 |
| nbsPortCfgEnable mandatory Port Enable/Disable | column | Enumeration | .1.3.6.1.4.1.629.1.4.1.1.10 |
| nbsPortCfgIsvpMode mandatory The Inter-Switch Virtual Mode of this port. nonIsvp(3)
means the port does not support this mode of operation.
Access(1) means the port is in Access mode. Trunk(2) means
the port… | column | Enumeration | .1.3.6.1.4.1.629.1.4.1.1.11 |
| nbsPortCfgIfType mandatory The port physical interface that is installed (if any). | column | Enumeration | .1.3.6.1.4.1.629.1.4.1.1.3 |
| nbsPortCfgPortSelect mandatory The port physical interface type selection.
For regular 10 Mbps Ethernet Ports, the default value
is Auto Select.
100 Base-Tx ports do not support more than one type of
physical i… | column | Enumeration | .1.3.6.1.4.1.629.1.4.1.1.4 |
| nbsPortCfgIfLink mandatory The link integrity status. This object is rellevant
for a port of type Twisted Pair or Fiber Optic,
10 or 100 Mbps | column | Enumeration | .1.3.6.1.4.1.629.1.4.1.1.5 |
| nbsPortCfgPortFctrl mandatory The port flow control mode selection: enable (default )
or disable | column | Enumeration | .1.3.6.1.4.1.629.1.4.1.1.6 |
| nbsPortCfgPortDplex mandatory The port dplex mode selection: halfDuplex(1) - default
or fullDuplex(2) | column | Enumeration | .1.3.6.1.4.1.629.1.4.1.1.7 |
| nbsPortCfgPortDelay mandatory The port forwarding delay expressed in bytes, with an
acceptable range of 6..64 bytes. The default is 64 bytes.
This object is supported only by the NH204-AT device | column | Integer32 | .1.3.6.1.4.1.629.1.4.1.1.8 |
| nbsPortCfgSpeedSelect mandatory The Ethernet Port speed selection in the case of a
different 'nbsPortCfgLanType' Ethernet ports. | column | Enumeration | .1.3.6.1.4.1.629.1.4.1.1.9 |