subscriberServicesCallWaitingEnable
MX-SUBSCRIBER-SERVICES-MIB ·
.1.3.6.1.4.1.4935.15.62.1.10.1.10
Object
Enable/Disable the call waiting service.
With this service enabled, new calls received by an endpoint during an already
active call on that endpoint will result in the endpoint hearing a special tone
indicating that a call is waiting on the second line. The user may then answer
that call by using the 'flash' button of the telephone. The user will be able
to switch between the two active calls by using the 'flash' button.
For this service to be enabled, the call hold service must be enabled as well.
The user cancels this service on a per-call basis when dialing a DTMF sequence
matching the digit map stored in subscriberServicesCallWaitingCancelDigitMap. To
disable or enable this service permanently, the subscriberServicesCallWaitingPermanentDigitMapEnable
and subscriberServicesCallWaitingPermanentDigitMapDisable digit maps must be used.
See subscriberServicesHoldEnable, subscriberServicesCallWaitingCancelDigitMap,
subscriberServicesCallWaitingPermanentDigitMapEnable and subscriberServicesCallWaitingPermanentDigitMapDisable
Context
- MIB
- MX-SUBSCRIBER-SERVICES-MIB
- OID
.1.3.6.1.4.1.4935.15.62.1.10.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- subscriberServicesIfEnablingEntry
- Table
- subscriberServicesIfEnablingTable
- Siblings
- 8
Values & Constraints
Type Values
0 | disable |
1 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| subscriberServicesSecondCallEnable Enable/Disable the second call service.
With this service enabled, a user with an active call can put the call on hold
and initiate a new call on the second line.
… | column | MX-TCMxEnableState | .1.3.6.1.4.1.4935.15.62.1.10.1.15 |
| subscriberServicesBlindTransferEnable Enable/Disable the blind call transfer service, sometimes called Transfer
without Consultation, or Unattended Transfer.
With this service enabled, a user can transf… | column | MX-TCMxEnableState | .1.3.6.1.4.1.4935.15.62.1.10.1.20 |
| subscriberServicesAttendedTransferEnable Enable/Disable the attended call transfer service, sometimes called Transfer
with Consultation.
With this service enabled, a user can transfer a call on hold to an … | column | MX-TCMxEnableState | .1.3.6.1.4.1.4935.15.62.1.10.1.25 |
| subscriberServicesConferenceEnable Enable/Disable the call conference service.
With this service enabled, a user can link two or more calls together to form
a single conversation, called a conference… | column | MX-TCMxEnableState | .1.3.6.1.4.1.4935.15.62.1.10.1.30 |
| subscriberServicesCallForwardUnconditionalEnable Enable/Disable the unconditional call forward service.
This service allows a user to forward ALL incoming calls to a specified target.
A short ring will be emitted … | column | MX-TCMxEnableState | .1.3.6.1.4.1.4935.15.62.1.10.1.35 |
| subscriberServicesCallForwardOnBusyEnable Enable/Disable the call forward on busy service.
This service allows a user to forward incoming calls to a specified target when
the user is already participating i… | column | MX-TCMxEnableState | .1.3.6.1.4.1.4935.15.62.1.10.1.40 |
| subscriberServicesCallForwardOnNoAnswerEnable Enable/Disable the call forward on no answer service.
This service allows a user to forward incoming calls to a specified target when
the user is unable to pick up … | column | MX-TCMxEnableState | .1.3.6.1.4.1.4935.15.62.1.10.1.45 |
| subscriberServicesHoldEnable Enable/Disable the holding service.
With this service enabled, an active call can be temporarily put on hold,
usually by using the 'flash' button of the telephone. … | column | MX-TCMxEnableState | .1.3.6.1.4.1.4935.15.62.1.10.1.5 |