subscriberServicesBlindTransferEnable
MX-SUBSCRIBER-SERVICES-MIB ·
.1.3.6.1.4.1.4935.15.62.1.10.1.20
Object
Enable/Disable the blind call transfer service, sometimes called Transfer
without Consultation, or Unattended Transfer.
With this service enabled, a user can transfer a call on hold to a still
ringing (unanswered) call.
Starting with an active call, a user can put the call on hold, initiate a call
to a third party, then transfer the participant that is currently on hold to
the third party. This must be done before the third party has answered. In case
the third party answers, the transfer becomes an Attended Transfer.
The transfer is triggered by the user hanging up the handset.
The remaining calls (held call and ringing call with third party) are then
connected together. The held call will be automatically unheld and will hear
the ringback tone provided by the third party's ringing.
For this service to be enabled, the call hold AND second call services must be
enabled as well.
See subscriberServicesHoldEnable and subscriberServicesSecondCallEnable.
Also see subscriberServicesAttendedTransferEnable for a variation of the
transfer method.
This variable's semantics are different depending on protocol and/or hardware
platforms. Please refer to the documentation shipped with your device for more
details.
Context
- MIB
- MX-SUBSCRIBER-SERVICES-MIB
- OID
.1.3.6.1.4.1.4935.15.62.1.10.1.20- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- subscriberServicesIfEnablingEntry
- Table
- subscriberServicesIfEnablingTable
- Siblings
- 8
Values & Constraints
Type Values
0 | disable |
1 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| subscriberServicesCallWaitingEnable Enable/Disable the call waiting service.
With this service enabled, new calls received by an endpoint during an already
active call on that endpoint will result in … | column | MX-TCMxEnableState | .1.3.6.1.4.1.4935.15.62.1.10.1.10 |
| subscriberServicesSecondCallEnable Enable/Disable the second call service.
With this service enabled, a user with an active call can put the call on hold
and initiate a new call on the second line.
… | column | MX-TCMxEnableState | .1.3.6.1.4.1.4935.15.62.1.10.1.15 |
| subscriberServicesAttendedTransferEnable Enable/Disable the attended call transfer service, sometimes called Transfer
with Consultation.
With this service enabled, a user can transfer a call on hold to an … | column | MX-TCMxEnableState | .1.3.6.1.4.1.4935.15.62.1.10.1.25 |
| subscriberServicesConferenceEnable Enable/Disable the call conference service.
With this service enabled, a user can link two or more calls together to form
a single conversation, called a conference… | column | MX-TCMxEnableState | .1.3.6.1.4.1.4935.15.62.1.10.1.30 |
| subscriberServicesCallForwardUnconditionalEnable Enable/Disable the unconditional call forward service.
This service allows a user to forward ALL incoming calls to a specified target.
A short ring will be emitted … | column | MX-TCMxEnableState | .1.3.6.1.4.1.4935.15.62.1.10.1.35 |
| subscriberServicesCallForwardOnBusyEnable Enable/Disable the call forward on busy service.
This service allows a user to forward incoming calls to a specified target when
the user is already participating i… | column | MX-TCMxEnableState | .1.3.6.1.4.1.4935.15.62.1.10.1.40 |
| subscriberServicesCallForwardOnNoAnswerEnable Enable/Disable the call forward on no answer service.
This service allows a user to forward incoming calls to a specified target when
the user is unable to pick up … | column | MX-TCMxEnableState | .1.3.6.1.4.1.4935.15.62.1.10.1.45 |
| subscriberServicesHoldEnable Enable/Disable the holding service.
With this service enabled, an active call can be temporarily put on hold,
usually by using the 'flash' button of the telephone. … | column | MX-TCMxEnableState | .1.3.6.1.4.1.4935.15.62.1.10.1.5 |