r2TimerVariantsAddressCompleteTimeout
MX-R2-MIB ·
.0.1875.1.100.300.1.1000
Object
column
r/w
Integer32
Address Complete Timeout
The Address Complete Timeout is the maximum time that the
caller waits for a reception of AddressComplete Tone after
sending all ANI or DNIS Digits.
This value is expressed in milliseconds (ms).
Context
- MIB
- MX-R2-MIB
- OID
.0.1875.1.100.300.1.1000- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- r2TimerVariantsEntry
- Table
- r2TimerVariantsTable
- Siblings
- 27
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-20000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| r2TimerVariantsInterfaceName Interface Name
Identifies the interface. | column | OctetString | .0.1875.1.100.300.1.100 |
| r2TimerVariantsWaitAnswerTimeout Wait Answer Timeout
The maximal time that the caller waits for an Answer signal
(ANSW) after receiving a Group B Line Free Signal Tone. This
timer is effective only… | column | Integer32 | .0.1875.1.100.300.1.1100 |
| r2TimerVariantsDigitCompleteTimeout Digit Complete Timeout
The maximal time that the caller waits for a Group I forward
tone after sending either a Group A next Dnis digit, next Ani
digit or next call… | column | Integer32 | .0.1875.1.100.300.1.1200 |
| r2TimerVariantsWaitGroupBResponseCompleteTimeout Wait Group B Response Complete Timeout
The maximal time that the caller waits for the confirmation
of the end of the compelled sequence after receiving a Group
B Si… | column | Integer32 | .0.1875.1.100.300.1.1300 |
| r2TimerVariantsWaitImmediateResponseCompleteTimeout Wait Immediate Response Complete Timeout
The maximal time that the caller waits for the confirmation
of the end of the compelled sequence after receiving a Group
B … | column | Integer32 | .0.1875.1.100.300.1.1400 |
| r2TimerVariantsPlayToneGuardTimeout Play Tone guard Timeout
The maximum time an incoming R2 registers waits after
receiving the confirmation of the reception of the Group B
Signal Tone before playing … | column | Integer32 | .0.1875.1.100.300.1.1500 |
| r2TimerVariantsAcceptCallTimeout Accept Call Timeout
Time that the unit waits to accept a R2 CAS call.
This value is expressed in milliseconds (ms). | column | Integer32 | .0.1875.1.100.300.1.1600 |
| r2TimerVariantsClearForwardGuardTimeout Clear Forward Guard Timeout
The maximum time an outgoing R2 register waits after sending
a clear forward line signal before transiting to the idle
state.
… | column | Integer32 | .0.1875.1.100.300.1.1700 |
| r2TimerVariantsClearBackwardGuardTimeout Clear Backward Guard Timeout
The maximum time an incoming R2 register waits after sending
a clear backward line signal before sending the idle line
signal and trans… | column | Integer32 | .0.1875.1.100.300.1.1800 |
| r2TimerVariantsFaultOnAnsweredGuardTimeout Fault On Answered Guard Timeout
The maximum time an outgoing R2 register waits for the fault
to clear before sending the clear forward line signal. In the
case of r… | column | Integer32 | .0.1875.1.100.300.1.1900 |
| r2TimerVariantsFaultOnClearBackwardGuardTimeout Fault On Clear Backward Guard Timeout
The maximum time an outgoing R2 register waits for the fault
to clear before sending the clear forward line signal. In the
cas… | column | Integer32 | .0.1875.1.100.300.1.2000 |
| r2TimerVariantsFaultOnSeizeAckGuardTimeout Fault On Seize Ack Guard Timeout
The maximum time an outgoing R2 register waits for the fault
to clear before sending the clear forward line signal. In the
case of … | column | Integer32 | .0.1875.1.100.300.1.2100 |
| r2TimerVariantsFaultOnSeizeGuardTimeout Fault On Seize Guard Timeout
The maximum time an outgoing R2 register waits for the fault
to clear before sending the clear forward line signal. In the
case of reco… | column | Integer32 | .0.1875.1.100.300.1.2200 |
| r2TimerVariantsDeclineGuardTimeout Decline Guard Timeout
Maximum time the AB=10 release signal is applied before
sending the AB=11 clearback signal. This parameter applies
when the IncomingDeclineMet… | column | Integer32 | .0.1875.1.100.300.1.2250 |
| r2TimerVariantsResetSpecific Reset Specific
Resets specific settings of R2 Timers parameters with the
default country settings. This command is used to retrieve
the default country configuratio… | column | Enumeration | .0.1875.1.100.300.1.2300 |
| r2TimerVariantsOverrideDefault Override Default
Overrides the default setting of R2 Timers for the
CountrySelection and InterfaceName.
* Disable: The interface uses the default c… | column | MX-TCMxEnableState | .0.1875.1.100.300.1.300 |
| r2TimerVariantsSeizureAckTimeout Seizure Ack Timeout
Maximum time an outgoing R2 register waits for the seizure
acknowledgement signal after sending a seizure signal.
This value is e… | column | Integer32 | .0.1875.1.100.300.1.400 |
| r2TimerVariantsFaultSeizureAckTimeout Fault Seizure Ack Timeout
Maximum time an incoming R2 register waits for a seizure
acknowledge failure condition to clear.
This value is expressed in… | column | Integer32 | .0.1875.1.100.300.1.500 |
| r2TimerVariantsDoubleSeizureTimeout Double Seizure Timeout
Minimum time an outgoing R2 register waits after a double
seizure is recognized before releasing the connection.
This value is… | column | Integer32 | .0.1875.1.100.300.1.600 |
| r2TimerVariantsDoubleAnswerTimeout Double Answer Timeout
Maximum time an outgoing R2 register waits after receiving a
clear-backward signal before releasing the connection.
This value … | column | Integer32 | .0.1875.1.100.300.1.700 |
| r2TimerVariantsAnswerTimeout Answer Timeout
Maximum time the answer signal AB=01 is applied before the
clear backward signal AB=11 is sent. This parameter is
generally used to reject collect ca… | column | Integer32 | .0.1875.1.100.300.1.710 |
| r2TimerVariantsReAnswerTimeout ReAnswer Timeout
Maximum time the clear backward signal AB=11 is applied
before the answer signal AB=01 is reapplied again. This
parameter is generally used to reje… | column | Integer32 | .0.1875.1.100.300.1.720 |
| r2TimerVariantsReleaseGuardTimeout Release Guard Timeout
Maximum time an incoming R2 register waits after sending an
idle line signal to prevent a new seizure of the line when a
clear forward line si… | column | Integer32 | .0.1875.1.100.300.1.800 |
| r2TimerVariantsInterCallGuardTimeout Inter-call Guard Timeout
Maximum time an outgoing R2 register waits after receiving an
idle line signal before attempting a new seizure of the line.
… | column | Integer32 | .0.1875.1.100.300.1.820 |
| r2TimerVariantsNoDigitTimeout No Digit Detected Timeout
Maximum time an incoming R2 register waits before sending the
congestion tone when no digits are received.
This value is ex… | column | Integer32 | .0.1875.1.100.300.1.830 |
| r2TimerVariantsCongestionToneGuardTimeout Congestion Tone Guard Timeout
Maximum time an incoming R2 register waits after sending a
congestion tone before sending a clear forward line signal
and transits to … | column | Integer32 | .0.1875.1.100.300.1.850 |
| r2TimerVariantsUnblockingTimeout Unblocking Timeout
Maximum time a both-way trunk waits before assuming an idle
state when a blocking condition is removed. This will prevent
a too aggressive seizur… | column | Integer32 | .0.1875.1.100.300.1.900 |