epSpecificJitterBufferCustomVbdMaxLength
MX-MIPT-MIB ·
.0.1600.1.200.400.1.800
Object
column
r/w
Unsigned32
Endpoint Specific Custom Voiceband Data Jitter Buffer Maximal
Length
The jitter buffer maximal length (in milliseconds) is the
highest delay the jitter buffer is allowed to introduce.
The maximal jitter buffer MUST be equal to or greater than
the minimal jitter buffer.
The maximal jitter buffer should be a multiple of ptime.
The maximal jitter buffer should be equal to or greater than
voiceband data minimal jitter buffer + (4 * ptime) in
adaptive mode.
The maximum allowed value for this parameter is platform
dependent.
This value is used only when the Level parameter is set to
'Custom'.
If this value is smaller than the value set in the
EpSpecificJitterBuffer.CustomVbdNomLength parameter, it will
be accepted, however the value set in the
EpSpecificJitterBuffer.CustomVbdNomLength parameter will
instead be used.
This configuration overrides the default configuration set in
the DefaultVbdJitterBufferCustomMaxLength parameter if the
EpSpecificJitterBuffer.EnableConfig parameter is set to
'Enable'.
Context
- MIB
- MX-MIPT-MIB
- OID
.0.1600.1.200.400.1.800- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- epSpecificJitterBufferEntry
- Table
- epSpecificJitterBufferTable
- Siblings
- 9
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-900
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| epSpecificJitterBufferEpId Endpoint Identifier
String that identifies an endpoint in other tables. | column | OctetString | .0.1600.1.200.400.1.100 |
| epSpecificJitterBufferEnableConfig Enable Configuration
Defines the configuration to use for a specific endpoint.
* Disable: The endpoint uses the default configuration as
define… | column | MX-TCMxEnableState | .0.1600.1.200.400.1.200 |
| epSpecificJitterBufferLevel Endpoint Specific Jitter Buffer Level
Jitter is an abrupt and unwanted variation of one or more
signal characteristics, such as the interval between
successive puls… | column | Enumeration | .0.1600.1.200.400.1.300 |
| epSpecificJitterBufferCustomMinLength Endpoint Specific Custom Jitter Buffer Minimal Length
The jitter buffer minimal length (in milliseconds) is the
delay the jitter buffer tries to maintain.
… | column | Unsigned32 | .0.1600.1.200.400.1.400 |
| epSpecificJitterBufferCustomNomLength Endpoint Specific Custom Jitter Buffer Nominal Length
The jitter buffer nominal length (in milliseconds) is the
delay the jitter buffer uses when a call begins. The… | column | Unsigned32 | .0.1600.1.200.400.1.410 |
| epSpecificJitterBufferCustomMaxLength Endpoint Specific Custom Jitter Buffer Maximal Length
The jitter buffer maximal length (in milliseconds) is the
highest delay the jitter buffer is allowed to introd… | column | Unsigned32 | .0.1600.1.200.400.1.500 |
| epSpecificJitterBufferCustomVbdMinLength Endpoint Specific Custom Voiceband Data Jitter Buffer Minimal
Length
The jitter buffer minimal length (in milliseconds) is the
delay the jitter buffer tries to main… | column | Unsigned32 | .0.1600.1.200.400.1.600 |
| epSpecificJitterBufferCustomVbdNomLength Endpoint Specific Custom Voiceband Data Jitter Buffer Nominal
Length
The jitter buffer nominal length (in milliseconds) is the
delay the jitter buffer uses when a c… | column | Unsigned32 | .0.1600.1.200.400.1.700 |
| epSpecificJitterBufferCustomVbdJitterBufferType Endpoint Specific Custom Voiceband Data Jitter Buffer Type
Algorithm to use for managing the jitter buffer during a
call. CustomVbdNomLength serves as the delay at … | column | Enumeration | .0.1600.1.200.400.1.900 |