epSpecificJitterBufferCustomNomLength
MX-MIPT-MIB ·
.0.1600.1.200.400.1.410
Object
column
r/w
Unsigned32
Endpoint Specific Custom Jitter Buffer Nominal Length
The jitter buffer nominal length (in milliseconds) is the
delay the jitter buffer uses when a call begins. The delay
then varies according to network conditions.
If this parameter is set to 0, the nominal jitter is set to
(minimal jitter buffer + maximal jitter buffer) / 2.
The nominal jitter buffer MUST be equal to or smaller than
the maximal jitter buffer.
The nominal jitter buffer should be a multiple of ptime.
This value is used only when the Level parameter is set to
'Custom'.
The maximum allowed value for this parameter is platform
dependent.
If this value is smaller than the value set in the
EpSpecificJitterBuffer.CustomMinLength parameter, it will be
accepted, however the value set in the
EpSpecificJitterBuffer.CustomMinLength parameter will instead
be used.
This configuration overrides the default configuration set in
the DefaultJitterBufferCustomNomLength parameter if the
EpSpecificJitterBuffer.EnableConfig parameter is set to
'Enable'.
Context
- MIB
- MX-MIPT-MIB
- OID
.0.1600.1.200.400.1.410- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- epSpecificJitterBufferEntry
- Table
- epSpecificJitterBufferTable
- Siblings
- 9
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-900
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| epSpecificJitterBufferEpId Endpoint Identifier
String that identifies an endpoint in other tables. | column | OctetString | .0.1600.1.200.400.1.100 |
| epSpecificJitterBufferEnableConfig Enable Configuration
Defines the configuration to use for a specific endpoint.
* Disable: The endpoint uses the default configuration as
define… | column | MX-TCMxEnableState | .0.1600.1.200.400.1.200 |
| epSpecificJitterBufferLevel Endpoint Specific Jitter Buffer Level
Jitter is an abrupt and unwanted variation of one or more
signal characteristics, such as the interval between
successive puls… | column | Enumeration | .0.1600.1.200.400.1.300 |
| epSpecificJitterBufferCustomMinLength Endpoint Specific Custom Jitter Buffer Minimal Length
The jitter buffer minimal length (in milliseconds) is the
delay the jitter buffer tries to maintain.
… | column | Unsigned32 | .0.1600.1.200.400.1.400 |
| epSpecificJitterBufferCustomMaxLength Endpoint Specific Custom Jitter Buffer Maximal Length
The jitter buffer maximal length (in milliseconds) is the
highest delay the jitter buffer is allowed to introd… | column | Unsigned32 | .0.1600.1.200.400.1.500 |
| epSpecificJitterBufferCustomVbdMinLength Endpoint Specific Custom Voiceband Data Jitter Buffer Minimal
Length
The jitter buffer minimal length (in milliseconds) is the
delay the jitter buffer tries to main… | column | Unsigned32 | .0.1600.1.200.400.1.600 |
| epSpecificJitterBufferCustomVbdNomLength Endpoint Specific Custom Voiceband Data Jitter Buffer Nominal
Length
The jitter buffer nominal length (in milliseconds) is the
delay the jitter buffer uses when a c… | column | Unsigned32 | .0.1600.1.200.400.1.700 |
| epSpecificJitterBufferCustomVbdMaxLength Endpoint Specific Custom Voiceband Data Jitter Buffer Maximal
Length
The jitter buffer maximal length (in milliseconds) is the
highest delay the jitter buffer is al… | column | Unsigned32 | .0.1600.1.200.400.1.800 |
| epSpecificJitterBufferCustomVbdJitterBufferType Endpoint Specific Custom Voiceband Data Jitter Buffer Type
Algorithm to use for managing the jitter buffer during a
call. CustomVbdNomLength serves as the delay at … | column | Enumeration | .0.1600.1.200.400.1.900 |