defaultCodecT38NoSignalEnable
MX-MIPT-MIB ·
.0.1600.1.100.700.600
Object
Default T.38 No Signal Enable/Disable Configuration.
Enables/disables the sending of T.38 no-signal packets. When
enabled, the unit ensures that, during a T.38 fax
transmission, data is sent out at least every time the
DefaultCodecT38NoSignalTimeout delay expires. In the absence
of meaningful data to send, no-signal packets are output.
Context
- MIB
- MX-MIPT-MIB
- OID
.0.1600.1.100.700.600- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- codecT38Group
- Siblings
- 7
Values & Constraints
Type Values
0 | disable |
1 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| defaultCodecT38DataEnable Default T.38 Enable/Disable Configuration for Data
If enabled, the T.38 protocol is used for fax transmission.
If a specific value is set for the
EpSpecificC… | scalar | MX-TCMxEnableState | .0.1600.1.100.700.100 |
| defaultCodecT38DataPriority Default T.38 Priority Configuration for Data
Indicates the priority of this data codec versus the other
data codecs. The data codec with the highest priority will be
of… | scalar | Unsigned32 | .0.1600.1.100.700.200 |
| defaultCodecT38RedundancyLevel Default T.38 Protection Level
Number of redundancy packets. This is the standard redundancy
offered by T.38.
Refer to the DefaultCodecT38FinalFramesRedundanc… | scalar | Unsigned32 | .0.1600.1.100.700.400 |
| defaultCodecT38FinalFramesRedundancy Default T.38 Redundancy for Final Frame
Defines the number of times T.38 packets will be
retransmitted. This only applies to the T.38 packets where the
PrimaryUDPTL con… | scalar | Unsigned32 | .0.1600.1.100.700.500 |
| defaultCodecT38NoSignalTimeout Default T.38 No Signal Timeout
The period, in seconds, at which no-signal packets are sent
during a T.38 transmission, in the absence of valid data. | scalar | Unsigned32 | .0.1600.1.100.700.700 |
| defaultCodecT38DetectionThreshold Default T.38 Detection Threshold
Sets the T.38 input signal detection threshold. Lowering the
threshold allows detecting lower amplitude fax signals.
* Def… | scalar | Enumeration | .0.1600.1.100.700.750 |
| epSpecificCodecT38Table Endpoint Specific Voice Codec Configuration
Endpoint specific configuration. | table | - | .0.1600.1.100.700.800 |