defaultCodecT38DataPriority
MX-MIPT-MIB ·
.0.1600.1.100.700.200
Object
scalar
r/w
Unsigned32
Default T.38 Priority Configuration for Data
Indicates the priority of this data codec versus the other
data codecs. The data codec with the highest priority will be
offered first when an outgoing call is initiated. This
priority is not used in incoming calls.
The application uses an internal order for codecs with the
same priority.
10 is the highest priority and 0 the lowest.
If a specific value is set for the
EpSpecificCodecT38.DataPriority parameter and the
EpSpecificCodecT38.EnableConfig parameter is set to 'Enable',
then the specific value will override the current default
value.
Context
- MIB
- MX-MIPT-MIB
- OID
.0.1600.1.100.700.200- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- codecT38Group
- Siblings
- 7
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 10-10
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| defaultCodecT38DataEnable Default T.38 Enable/Disable Configuration for Data
If enabled, the T.38 protocol is used for fax transmission.
If a specific value is set for the
EpSpecificC… | scalar | MX-TCMxEnableState | .0.1600.1.100.700.100 |
| defaultCodecT38RedundancyLevel Default T.38 Protection Level
Number of redundancy packets. This is the standard redundancy
offered by T.38.
Refer to the DefaultCodecT38FinalFramesRedundanc… | scalar | Unsigned32 | .0.1600.1.100.700.400 |
| defaultCodecT38FinalFramesRedundancy Default T.38 Redundancy for Final Frame
Defines the number of times T.38 packets will be
retransmitted. This only applies to the T.38 packets where the
PrimaryUDPTL con… | scalar | Unsigned32 | .0.1600.1.100.700.500 |
| defaultCodecT38NoSignalEnable Default T.38 No Signal Enable/Disable Configuration.
Enables/disables the sending of T.38 no-signal packets. When
enabled, the unit ensures that, during a T.38 fax
tran… | scalar | MX-TCMxEnableState | .0.1600.1.100.700.600 |
| defaultCodecT38NoSignalTimeout Default T.38 No Signal Timeout
The period, in seconds, at which no-signal packets are sent
during a T.38 transmission, in the absence of valid data. | scalar | Unsigned32 | .0.1600.1.100.700.700 |
| defaultCodecT38DetectionThreshold Default T.38 Detection Threshold
Sets the T.38 input signal detection threshold. Lowering the
threshold allows detecting lower amplitude fax signals.
* Def… | scalar | Enumeration | .0.1600.1.100.700.750 |
| epSpecificCodecT38Table Endpoint Specific Voice Codec Configuration
Endpoint specific configuration. | table | - | .0.1600.1.100.700.800 |