defaultCodecClearModeDataEnable
MX-MIPT-MIB ·
.0.1600.1.100.800.300
Object
Default Clear Mode Enable/Disable Configuration for Data
If enabled, the Clear Mode protocol is used for data
transmission.
The data transmission for this codec can be triggered by the
detection of a fax/modem tone or if the properties of the call
indicate that it was for data.
Clear Mode is a method to carry 64 kbit/s channel data
transparently in RTP packets as defined in RFC 4040.
This codec always uses the RTP transport.
If a specific value is set for the
EpSpecificCodecClearMode.DataEnable parameter and the
EpSpecificCodecClearMode.EnableConfig parameter is set to
'Enable', then the specific value will override the current
default value.
Context
- MIB
- MX-MIPT-MIB
- OID
.0.1600.1.100.800.300- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- codecClearModeGroup
- Siblings
- 7
Values & Constraints
Type Values
0 | disable |
1 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| defaultCodecClearModeVoiceEnable Default Clear Mode Enable/Disable Configuration for Voice
Indicates if the codec can be selected for voice transmission.
If enabled, this codec is listed as supported f… | scalar | MX-TCMxEnableState | .0.1600.1.100.800.100 |
| defaultCodecClearModeVoicePriority Default Clear Mode Priority Configuration for Voice
Indicates the priority of this voice codec versus the other
voice codecs. The voice codec with the highest priority … | scalar | Unsigned32 | .0.1600.1.100.800.200 |
| defaultCodecClearModeDataPriority Default Clear Mode Priority Configuration for Data
Indicates the priority of this data codec versus the other
data codecs. The data codec with the highest priority will… | scalar | Unsigned32 | .0.1600.1.100.800.400 |
| defaultCodecClearModePayloadType Default Clear Mode Payload Type
When enabling Clear Mode for voice and data transmission, this
parameter determines the actual RTP dynamic payload type used
in an initi… | scalar | Unsigned32 | .0.1600.1.100.800.500 |
| defaultCodecClearModeMinPTime Default Clear Mode Minimum Packetization Period Configuration
Lower boundary for the packetization period of the given
codec.
Clear Mode -> (10 ms..30 ms)
… | scalar | Unsigned32 | .0.1600.1.100.800.600 |
| defaultCodecClearModeMaxPTime Default Clear Mode Maximum Packetization Period Configuration
Upper boundary for the packetization period of the given
codec.
Clear Mode -> (10 ms..30 ms)
… | scalar | Unsigned32 | .0.1600.1.100.800.700 |
| epSpecificCodecClearModeTable Endpoint Specific Voice Codec Configuration
Endpoint specific configuration. | table | - | .0.1600.1.100.800.800 |