codecClearModeGroup
MX-MIPT-MIB ·
.0.1600.1.100.800
Object
node
No description available.
Context
- MIB
- MX-MIPT-MIB
- OID
.0.1600.1.100.800- Type
- node
- Parent
- codecGroup
- Siblings
- 10
- Children
- 8
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| defaultCodecGenericVoiceActivityDetection Default Generic VAD Configuration
If Voice Activity Detection (VAD) is enabled, then speech
frames are only sent during talkspurts (periods of audio
activity).
… | scalar | Enumeration | .0.1600.1.100.100 |
| codecXCCDGroup | node | - | .0.1600.1.100.1000 |
| epSpecificCodecTable Endpoint Specific Voice Codec Configuration
Endpoint specific configuration. | table | - | .0.1600.1.100.200 |
| codecG711Group | node | - | .0.1600.1.100.300 |
| codecG722Group | node | - | .0.1600.1.100.350 |
| codecG723Group | node | - | .0.1600.1.100.400 |
| codecG726Group | node | - | .0.1600.1.100.500 |
| codecG729Group | node | - | .0.1600.1.100.600 |
| codecT38Group | node | - | .0.1600.1.100.700 |
| codecClearChannelGroup | node | - | .0.1600.1.100.900 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| defaultCodecClearModeVoiceEnable Default Clear Mode Enable/Disable Configuration for Voice
Indicates if the codec can be selected for voice transmission.
If enabled, this codec is listed as supported f… | scalar | MX-TCMxEnableState | .0.1600.1.100.800.100 |
| defaultCodecClearModeVoicePriority Default Clear Mode Priority Configuration for Voice
Indicates the priority of this voice codec versus the other
voice codecs. The voice codec with the highest priority … | scalar | Unsigned32 | .0.1600.1.100.800.200 |
| defaultCodecClearModeDataEnable Default Clear Mode Enable/Disable Configuration for Data
If enabled, the Clear Mode protocol is used for data
transmission.
The data transmission for this co… | scalar | MX-TCMxEnableState | .0.1600.1.100.800.300 |
| defaultCodecClearModeDataPriority Default Clear Mode Priority Configuration for Data
Indicates the priority of this data codec versus the other
data codecs. The data codec with the highest priority will… | scalar | Unsigned32 | .0.1600.1.100.800.400 |
| defaultCodecClearModePayloadType Default Clear Mode Payload Type
When enabling Clear Mode for voice and data transmission, this
parameter determines the actual RTP dynamic payload type used
in an initi… | scalar | Unsigned32 | .0.1600.1.100.800.500 |
| defaultCodecClearModeMinPTime Default Clear Mode Minimum Packetization Period Configuration
Lower boundary for the packetization period of the given
codec.
Clear Mode -> (10 ms..30 ms)
… | scalar | Unsigned32 | .0.1600.1.100.800.600 |
| defaultCodecClearModeMaxPTime Default Clear Mode Maximum Packetization Period Configuration
Upper boundary for the packetization period of the given
codec.
Clear Mode -> (10 ms..30 ms)
… | scalar | Unsigned32 | .0.1600.1.100.800.700 |
| epSpecificCodecClearModeTable Endpoint Specific Voice Codec Configuration
Endpoint specific configuration. | table | - | .0.1600.1.100.800.800 |