signalingPropertiesEarlyDisconnect
MX-CROUT-MIB ·
.0.1750.1.1200.1.400
Object
Early Disconnect
Enable/Disable the early disconnect feature.
When early disconnect is enabled, the SIP BYE message is sent
upon ISDN 'Disconnect' signal reception.
When early disconnect is disabled, the SIP BYE message is sent
upon ISDN 'Call release' signal reception.
If early disconnect is enabled but no ISDN 'Disconnect' message
is received, the SIP BYE message will be sent upon receiving an
ISDN 'Call release' as if the early disconnect was disabled.
Context
- MIB
- MX-CROUT-MIB
- OID
.0.1750.1.1200.1.400- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- signalingPropertiesEntry
- Table
- signalingPropertiesTable
- Siblings
- 14
Values & Constraints
Type Values
0 | disable |
1 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| signalingPropertiesIndex Index
Unique identifier of the row in the table. | column | SNMPv2-SMIUnsigned32 | .0.1750.1.1200.1.100 |
| signalingPropertiesDelete Delete
Deletes this row. | column | Enumeration | .0.1750.1.1200.1.1000 |
| signalingPropertiesName Name
Name of the signaling properties defined by this row. It must
be unique in the table. | column | OctetString | .0.1750.1.1200.1.200 |
| signalingPropertiesEarlyConnect Early Connect
Enable/Disable the early connect feature.
When early connect is enabled, the SIP call is connected by
sending a 200 OK message instead … | column | MX-TCMxEnableState | .0.1750.1.1200.1.300 |
| signalingPropertiesDestinationHost Destination Host
SIP message destination.
The value can be set to the '<local_ip_port>' macro to replace
the properties by the local IP address and p… | column | OctetString | .0.1750.1.1200.1.500 |
| signalingPropertiesAllow180Sdp Allow 180 SDP
Enable/Disable the 180 with SDP allowed.
When disabled, a SIP 183 with SDP is sent instead of a 180 with
SDP.
This does … | column | MX-TCMxEnableState | .0.1750.1.1200.1.550 |
| signalingPropertiesAllow183NoSdp Allow 183 without SDP
Enable/Disable the 183 without SDP allowed.
When disabled, a 183 without SDP is not sent.
This does not affect t… | column | MX-TCMxEnableState | .0.1750.1.1200.1.560 |
| signalingPropertiesPrivacy Privacy
Sets the privacy level of the call.
* Disable: No privacy is used.
* None: Use P-Asserted Identity privacy.
* Id: Use P-Preferred Ident… | column | Enumeration | .0.1750.1.1200.1.570 |
| signalingPropertiesCallPropertiesTranslation Call Property Translation Overrides
Name of the call property translation to apply to the call.
The translation modifies the call properties before t… | column | OctetString | .0.1750.1.1200.1.580 |
| signalingPropertiesSipHeadersTranslation SIP Headers Translation Overrides
Name of the SIP header translations to apply to the call.
The translation modifies the SIP headers before the call … | column | OctetString | .0.1750.1.1200.1.590 |
| signalingPropertiesConfigStatus Config Status
Configuration status of the row.
It indicates if the configuration of the row is valid. | column | OctetString | .0.1750.1.1200.1.600 |
| signalingPropertiesUp Up
Moves the current row upwards. | column | Enumeration | .0.1750.1.1200.1.700 |
| signalingPropertiesDown Down
Moves the current row downwards. | column | Enumeration | .0.1750.1.1200.1.800 |
| signalingPropertiesInsert Insert
Inserts a new row before this row. | column | Enumeration | .0.1750.1.1200.1.900 |