signalingPropertiesCallPropertiesTranslation
MX-CROUT-MIB ·
.0.1750.1.1200.1.580
Object
column
r/w
OctetString
Call Property Translation Overrides
Name of the call property translation to apply to the call.
The translation modifies the call properties before the call is
sent to its destination.
More than one translation can be specified. In this case, the
translations are separated with ',' and are executed in
sequential order.
Context
- MIB
- MX-CROUT-MIB
- OID
.0.1750.1.1200.1.580- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- signalingPropertiesEntry
- Table
- signalingPropertiesTable
- Siblings
- 14
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-512
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| signalingPropertiesIndex Index
Unique identifier of the row in the table. | column | SNMPv2-SMIUnsigned32 | .0.1750.1.1200.1.100 |
| signalingPropertiesDelete Delete
Deletes this row. | column | Enumeration | .0.1750.1.1200.1.1000 |
| signalingPropertiesName Name
Name of the signaling properties defined by this row. It must
be unique in the table. | column | OctetString | .0.1750.1.1200.1.200 |
| signalingPropertiesEarlyConnect Early Connect
Enable/Disable the early connect feature.
When early connect is enabled, the SIP call is connected by
sending a 200 OK message instead … | column | MX-TCMxEnableState | .0.1750.1.1200.1.300 |
| signalingPropertiesEarlyDisconnect Early Disconnect
Enable/Disable the early disconnect feature.
When early disconnect is enabled, the SIP BYE message is sent
upon ISDN 'Disconnect' si… | column | MX-TCMxEnableState | .0.1750.1.1200.1.400 |
| signalingPropertiesDestinationHost Destination Host
SIP message destination.
The value can be set to the '<local_ip_port>' macro to replace
the properties by the local IP address and p… | column | OctetString | .0.1750.1.1200.1.500 |
| signalingPropertiesAllow180Sdp Allow 180 SDP
Enable/Disable the 180 with SDP allowed.
When disabled, a SIP 183 with SDP is sent instead of a 180 with
SDP.
This does … | column | MX-TCMxEnableState | .0.1750.1.1200.1.550 |
| signalingPropertiesAllow183NoSdp Allow 183 without SDP
Enable/Disable the 183 without SDP allowed.
When disabled, a 183 without SDP is not sent.
This does not affect t… | column | MX-TCMxEnableState | .0.1750.1.1200.1.560 |
| signalingPropertiesPrivacy Privacy
Sets the privacy level of the call.
* Disable: No privacy is used.
* None: Use P-Asserted Identity privacy.
* Id: Use P-Preferred Ident… | column | Enumeration | .0.1750.1.1200.1.570 |
| signalingPropertiesSipHeadersTranslation SIP Headers Translation Overrides
Name of the SIP header translations to apply to the call.
The translation modifies the SIP headers before the call … | column | OctetString | .0.1750.1.1200.1.590 |
| signalingPropertiesConfigStatus Config Status
Configuration status of the row.
It indicates if the configuration of the row is valid. | column | OctetString | .0.1750.1.1200.1.600 |
| signalingPropertiesUp Up
Moves the current row upwards. | column | Enumeration | .0.1750.1.1200.1.700 |
| signalingPropertiesDown Down
Moves the current row downwards. | column | Enumeration | .0.1750.1.1200.1.800 |
| signalingPropertiesInsert Insert
Inserts a new row before this row. | column | Enumeration | .0.1750.1.1200.1.900 |