autoRoutingIncomingSignalingProperties
MX-CROUT-MIB ·
.0.1750.1.2300
Object
scalar
r/w
OctetString
Incoming Signaling Properties
Name of the signaling properties associated with the route from
the SIP gateway to the endpoint.
See also Route.SignalingProperties
Context
- MIB
- MX-CROUT-MIB
- OID
.0.1750.1.2300- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cRoutMIBObjects
- Siblings
- 18
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-512
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| statusGroup | node | - | .0.1750.1.100 |
| signalingPropertiesTable Signaling Properties
This table shows the configured signaling properties to be used
by the call routing service. The configuration is not used until
the ApplyConfig co… | table | - | .0.1750.1.1200 |
| sipHeadersTranslationTable SIP Header Translation Overrides
This table shows the configured SIP header translations to be
used by the call routing service. The configuration is not used
until the… | table | - | .0.1750.1.1400 |
| callPropertiesTranslationTable Call Property Translation Overrides
This table shows the configured call properties translations to
be used by the call routing service. The configuration is not
used u… | table | - | .0.1750.1.1600 |
| autoRoutingTable Auto-routing Config
This table holds the parameters required for the configuration
of the auto-routing feature. | table | - | .0.1750.1.1900 |
| autoRoutingEnable Auto-Routing
Enable/Disable the automatic insertion of default routes for
selected endpoints.
When enabled, routes are automatically added to the Route Table… | scalar | MX-TCMxEnableState | .0.1750.1.200 |
| autoRoutingCriteriaType Criteria Type
Determines the type of criteria to use to create an automatic
rule from SIP to the telephony endpoints.
* E164: The E164 associated with the … | scalar | Enumeration | .0.1750.1.2000 |
| autoRoutingIncomingMappings Incoming Transformations
Name of the transformations associated with the route from the
SIP gateway to the endpoint.
More than one transformation can be spec… | scalar | OctetString | .0.1750.1.2100 |
| autoRoutingOutgoingMappings Outgoing Transformations
Name of the transformations associated with the route from the
endpoint to the SIP gateway.
More than one transformation can be spec… | scalar | OctetString | .0.1750.1.2200 |
| autoRoutingOutgoingSignalingProperties Outgoing Signaling Properties
Name of the signaling properties associated with the route from
the endpoint to the SIP gateway.
See also Route.SignalingProper… | scalar | OctetString | .0.1750.1.2400 |
| sipRedirectTable SIP Redirects
This table allows the configuration of SIP redirections that can
be used as Route destinations. When the Route source is a SIP
interface, incoming SIP Inv… | table | - | .0.1750.1.2500 |
| routeTable Routes
This table shows the configured route to be used by the call
routing service. The configuration is not used until the
ApplyConfig command is executed. | table | - | .0.1750.1.300 |
| callSimulationGroup | node | - | .0.1750.1.3000 |
| mappingTypeTable Transformations
This table defines which Call Properties are used in the
transformations configured in the call routing service. The
Transformation Rules (MappingExpres… | table | - | .0.1750.1.500 |
| notificationsGroup | node | - | .0.1750.1.60010 |
| configurationGroup | node | - | .0.1750.1.60020 |
| mappingExpressionTable Transformation Rules
This table shows the transformation rules used by the call
routing service. The Transformations (MappingType) table
contains the transformation rel… | table | - | .0.1750.1.700 |
| huntTable Hunt
This table shows the configured hunt to be used by the call
routing service. The configuration is not used until the
ApplyConfig command is executed. | table | - | .0.1750.1.900 |