autoRoutingEnable
MX-CROUT-MIB ·
.0.1750.1.200
Object
Auto-Routing
Enable/Disable the automatic insertion of default routes for
selected endpoints.
When enabled, routes are automatically added to the Route Table
in order to connect the endpoints marked as eligible for
auto-routing and the designated SIP gateway (see the
Autoroutable and the AutoroutingGateway parameters). These
automatic routes are displayed in the Routes Table of the Status
page but do not show up in the configuration.
Context
- MIB
- MX-CROUT-MIB
- OID
.0.1750.1.200- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cRoutMIBObjects
- Siblings
- 18
Values & Constraints
Type Values
0 | disable |
1 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| statusGroup | node | - | .0.1750.1.100 |
| signalingPropertiesTable Signaling Properties
This table shows the configured signaling properties to be used
by the call routing service. The configuration is not used until
the ApplyConfig co… | table | - | .0.1750.1.1200 |
| sipHeadersTranslationTable SIP Header Translation Overrides
This table shows the configured SIP header translations to be
used by the call routing service. The configuration is not used
until the… | table | - | .0.1750.1.1400 |
| callPropertiesTranslationTable Call Property Translation Overrides
This table shows the configured call properties translations to
be used by the call routing service. The configuration is not
used u… | table | - | .0.1750.1.1600 |
| autoRoutingTable Auto-routing Config
This table holds the parameters required for the configuration
of the auto-routing feature. | table | - | .0.1750.1.1900 |
| autoRoutingCriteriaType Criteria Type
Determines the type of criteria to use to create an automatic
rule from SIP to the telephony endpoints.
* E164: The E164 associated with the … | scalar | Enumeration | .0.1750.1.2000 |
| autoRoutingIncomingMappings Incoming Transformations
Name of the transformations associated with the route from the
SIP gateway to the endpoint.
More than one transformation can be spec… | scalar | OctetString | .0.1750.1.2100 |
| autoRoutingOutgoingMappings Outgoing Transformations
Name of the transformations associated with the route from the
endpoint to the SIP gateway.
More than one transformation can be spec… | scalar | OctetString | .0.1750.1.2200 |
| autoRoutingIncomingSignalingProperties Incoming Signaling Properties
Name of the signaling properties associated with the route from
the SIP gateway to the endpoint.
See also Route.SignalingProper… | scalar | OctetString | .0.1750.1.2300 |
| autoRoutingOutgoingSignalingProperties Outgoing Signaling Properties
Name of the signaling properties associated with the route from
the endpoint to the SIP gateway.
See also Route.SignalingProper… | scalar | OctetString | .0.1750.1.2400 |
| sipRedirectTable SIP Redirects
This table allows the configuration of SIP redirections that can
be used as Route destinations. When the Route source is a SIP
interface, incoming SIP Inv… | table | - | .0.1750.1.2500 |
| routeTable Routes
This table shows the configured route to be used by the call
routing service. The configuration is not used until the
ApplyConfig command is executed. | table | - | .0.1750.1.300 |
| callSimulationGroup | node | - | .0.1750.1.3000 |
| mappingTypeTable Transformations
This table defines which Call Properties are used in the
transformations configured in the call routing service. The
Transformation Rules (MappingExpres… | table | - | .0.1750.1.500 |
| notificationsGroup | node | - | .0.1750.1.60010 |
| configurationGroup | node | - | .0.1750.1.60020 |
| mappingExpressionTable Transformation Rules
This table shows the transformation rules used by the call
routing service. The Transformations (MappingType) table
contains the transformation rel… | table | - | .0.1750.1.700 |
| huntTable Hunt
This table shows the configured hunt to be used by the call
routing service. The configuration is not used until the
ApplyConfig command is executed. | table | - | .0.1750.1.900 |