snmpTrapTest
MS-SWITCH30-MIB ·
.1.3.6.1.4.1.3181.10.3.22.5
Object
scalar
r/w
Enumeration
This entry triggers a trap event without the regarding system event took place. No change to the device will be done. This entry can be used to test the trap destination configuration. This entry is self clearing.
Context
- MIB
- MS-SWITCH30-MIB
- OID
.1.3.6.1.4.1.3181.10.3.22.5- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- snmpinterface
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | inactive |
1 | genColdstart |
2 | genWarmstart |
3 | genLinkdown |
4 | genLinkup |
5 | genAuthfailure |
6 | genEgpneighborloss |
7 | entLinkchange |
8 | entFactoryreset |
9 | entTemplevelchange |
10 | entErrorcounter |
11 | entOverundervoltage |
12 | entTempshutdown |
13 | entPoelimitexceeded |
14 | entSupplystatuschange |
15 | entSfpplugchange |
16 | entLoginfailure |
17 | entRingbroken |
18 | entRingalarm |
19 | entAuthpwfail |
20 | entPrivpwfail |
21 | entAccesspermission |
22 | entSeclevelfail |
255 | unsupported |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snmpSupport This entry contains the bitwise information
which SNMP version is supported.
Bit 0: SNMP v1 supported
Bit 1: SNMP v2c supported
Bit 2: SNMP v3 supported | scalar | Integer32 | .1.3.6.1.4.1.3181.10.3.22.1 |
| snmpTrapDestTable This table contains information regarding
the snmp trap configuration for several
destinations. | table | - | .1.3.6.1.4.1.3181.10.3.22.10 |
| snmpEnable This entry contains the bitwise information
which SNMP version is enabled.
Bit 0: SNMP v1 enabled
Bit 1: SNMP v2c enabled
Bit 2: SNMP v3 enabled
It is not allowed to disable an i… | scalar | Integer32 | .1.3.6.1.4.1.3181.10.3.22.2 |
| snmpApplyMode If this entry is set to '1' changes due
to 'set...' commands are immediately applied
to the switch and saved in the configuration.
If it is set to '2' changed are also applied
… | scalar | Enumeration | .1.3.6.1.4.1.3181.10.3.22.3 |
| snmpApply This entry only has an effect if 'snmpApplyMode'
is not set to '1', which is the normal operation.
In this case the changed configuration will be
applied to the switch (if set to… | scalar | Enumeration | .1.3.6.1.4.1.3181.10.3.22.4 |
| snmpTrapDestCount The number of supported trap destinations
on this system. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3181.10.3.22.6 |
| snmpCommunityRead This is the string used as community name
in SNMP Get and GetNext requests. | scalar | OctetString | .1.3.6.1.4.1.3181.10.3.22.7 |
| snmpCommunityWrite This is the string used as community name
in SNMP Set operations. | scalar | OctetString | .1.3.6.1.4.1.3181.10.3.22.8 |
| snmpTrapEnable This entry contains the information if
snmp traps are globally enabled or not. | scalar | Enumeration | .1.3.6.1.4.1.3181.10.3.22.9 |