realCOMAllowDriverControl
MOXA-W2x50A-MIB ·
.1.3.6.1.4.1.8691.2.13.1.4.1.2.1.1.1.4
Object
column
r/w
Enumeration
If Max connection is greater than 1, NPort will ignore driver control commands from all connected hosts. However, if you set Allow driver control to YES, control commands will be accepted. Note that since the NPort W2x50A series device server may get configuration changes from multiple hosts, the most recent command received will take precedence.
Context
- MIB
- MOXA-W2x50A-MIB
- OID
.1.3.6.1.4.1.8691.2.13.1.4.1.2.1.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- realCOMEntry
- Table
- realCOMTable
- Siblings
- 5
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | disable |
1 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| realCOMTcpAliveCheck The TCP alive check time.
0 min: TCP connection will not be closed when the
TCP connection is idle.
1 to 99 min: The NPort W2x50A series device server
automatically closes the TCP… | column | Integer32 | .1.3.6.1.4.1.8691.2.13.1.4.1.2.1.1.1.1 |
| realCOMMaxConnection Max connection is usually used when the user needs
to receive data from different hosts simultaneously.
The factory default is 1. In this case, only one
specific host can access t… | column | Integer32 | .1.3.6.1.4.1.8691.2.13.1.4.1.2.1.1.1.2 |
| realCOMIgnoreJammedIp Previously, when Max connection was set to a value
greater than 1, and the serial device was
transmitting data, if any one of the connected hosts
stopped responding, the serial de… | column | Enumeration | .1.3.6.1.4.1.8691.2.13.1.4.1.2.1.1.1.3 |
| realCOMConnectionDownRTS For some applications, serial devices must obtain
the Ethernet link status by reading the RTS signal from the
NPort W2x50A series device server. If this setting is
set to 'always … | column | Enumeration | .1.3.6.1.4.1.8691.2.13.1.4.1.2.1.1.1.5 |
| realCOMConnectionDownDTR For some applications, serial devices must obtain
the Ethernet link status by reading the DTR signal from the
NPort W2x50A series device server. If this setting is
set to 'always … | column | Enumeration | .1.3.6.1.4.1.8691.2.13.1.4.1.2.1.1.1.6 |