realCOMIgnoreJammedIp
MOXA-IAW5x50A_IO-MIB ·
.1.3.6.1.4.1.8691.2.21.1.4.1.2.1.1.1.3
Object
column
r/w
Enumeration
Previously, when Max connection was set to a value greater than 1, and the serial device was transmitting data, if any one of the connected hosts stopped responding, the serial device would wait until the data had been transmitted successfully before transmitting the second group of data to all hosts. Currently, if you select Yes for 'Ignore jammed IP,' the host that is not responding will be ignored, but the data will still be transmitted to the other hosts.
Context
- MIB
- MOXA-IAW5x50A_IO-MIB
- OID
.1.3.6.1.4.1.8691.2.21.1.4.1.2.1.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- realCOMEntry
- Table
- realCOMTable
- Siblings
- 5
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | disable |
1 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| realCOMTcpAliveCheck The TCP alive check time.
0 min: TCP connection will not be closed when the
TCP connection is idle.
1 to 99 min: The NPort IAW5x50A_IO series device server
automatically closes th… | column | Integer32 | .1.3.6.1.4.1.8691.2.21.1.4.1.2.1.1.1.1 |
| realCOMMaxConnection Max connection is usually used when the user needs
to receive data from different hosts simultaneously.
The factory default is 1. In this case, only one
specific host can access t… | column | Integer32 | .1.3.6.1.4.1.8691.2.21.1.4.1.2.1.1.1.2 |
| realCOMAllowDriverControl If Max connection is greater than 1, NPort will
ignore driver control commands from all connected
hosts. However, if you set Allow driver control to
YES, control commands will be … | column | Enumeration | .1.3.6.1.4.1.8691.2.21.1.4.1.2.1.1.1.4 |
| realCOMConnectionDownRTS For some applications, serial devices must obtain
the Ethernet link status by reading the RTS signal from the
NPort IAW5x50A_IO series device server. If this setting is
set to 'al… | column | Enumeration | .1.3.6.1.4.1.8691.2.21.1.4.1.2.1.1.1.5 |
| realCOMConnectionDownDTR For some applications, serial devices must obtain
the Ethernet link status by reading the DTR signal from the
NPort IAW5x50A_IO series device server. If this setting is
set to 'al… | column | Enumeration | .1.3.6.1.4.1.8691.2.21.1.4.1.2.1.1.1.6 |