mocaIfPassword

Object

column r/w OctetString

Specify the MoCA password using an ASCII numeric string.
              
This value must be 12 to 17 decimal digits long.  Access is only
allowed when used with SNMPv3 protocol, but not allowed when
used with SNMPv1 or SNMPv2c protocol.
              
If this value changes, this node will drop from the network if
'mocaIfPrivacyEnable' is 'true'.  If this managed object is
changed, it may not be possible to change this object again via
the SNMP protocol. The mechanism to change this object again is 
out of the scope of this MIB definition draft.

Context

MIB: MOCA11-MIB
OID: .1.3.6.1.4.1.31621.1.1.1.1.1.8
Type: column
Access: readwrite
Status: current
Parent: mocaIfConfigEntry
Table: mocaIfConfigTable
Siblings: 13

Related Objects

Sibling Objects

Object	Type	Syntax	OID
mocaIfEnable Enable the MoCA interface if this value is 'true'. Disable the MoCA interface if this value is 'false'. If this managed object is disabled, it may not be possible …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.31621.1.1.1.1.1.1`
mocaIfAccessEnable Enable MAC address access control on the MoCA interface if this value is 'true'. Disable MAC address access control on the MoCA interface if this value is 'false'. …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.31621.1.1.1.1.1.10`
mocaIfPhyThreshold Specify a minimum PHY rate. If transmit PHY rate between all pairs of MoCA nodes are greater than or equal to this value, then transmit PHY rate of one pair of MoCA…	column	MocaPhyRate	`.1.3.6.1.4.1.31621.1.1.1.1.1.11`
mocaIfPhyThresholdEnable If transmit PHY rate between all pairs of MoCA nodes are greater than or equal to 'mocaIfPhyThreshold', then transmit PHY rate of one pair of MoCA node is less than 'mocaIfPhyThre…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.31621.1.1.1.1.1.12`
mocaIfStatusChangeEnable If 'mocaIfStatusChangeEnable' is 'true' and 'mocaIfStatus' changes, then the trap 'mocaTrapIfStatusChange' is sent.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.31621.1.1.1.1.1.13`
mocaIfNumNodesChangeEnable If 'mocaIfNumNodesChangeEnable' is 'true' and 'mocaIfNumNodes' changes, then the trap 'mocaTrapIfNumNodesChange' is sent. Only one node in the MoCA network should s…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.31621.1.1.1.1.1.14`
mocaIfChannelMask Specify a list of RF center frequencies represented by a bitmask which this MoCA node is allowed to form or join a MoCA network. If the new list of frequencies does…	column	MocaChannelMask	`.1.3.6.1.4.1.31621.1.1.1.1.1.2`
mocaIfPowerControl Enable automatic power control if this value is 'true'. Use a fixed transmit power level if this value is 'false'.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.31621.1.1.1.1.1.3`
mocaIfTxPowerLimit Specify the transmit power BACKOFF in dB. The transmit power SHALL only be changed when the device 'mocaIfStatus' object is not 'linkUp', which means the interface is not part of…	column	MocaDB	`.1.3.6.1.4.1.31621.1.1.1.1.1.4`
mocaIfBeaconPowerLimit Specify the beacon transmit power BACKOFF in dB. The beacon transmit power SHALL only be changed when the device 'mocaIfStatus' object is not 'linkUp', which means the interface …	column	MocaDB	`.1.3.6.1.4.1.31621.1.1.1.1.1.5`
mocaIfPowerControlTargetRate Specify the target transmit PHY rate in Mbps for the power control algorithm. This change should be used in the next maintenance cycle in the MoCA network.	column	MocaPhyRate	`.1.3.6.1.4.1.31621.1.1.1.1.1.6`
mocaIfPrivacyEnable Enable link privacy if this value is 'true', and use the 'mocaIfPassword' to generate the MAC management key and initial privacy management key. Disable link privacy and do not p…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.31621.1.1.1.1.1.7`
mocaIfPreferredNC Set this node as preferred NC if this value is 'true'. Do not set this node as preferred NC if this value is 'false'. This value can be ignored by this MoC…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.31621.1.1.1.1.1.9`

Object

Context

Syntax

Values & Constraints

Related Objects