mocaIfAccessEnable
MOCA11-MIB ·
.1.3.6.1.4.1.31621.1.1.1.1.1.10
Object
Enable MAC address access control on the MoCA interface if this
value is 'true'. Disable MAC address access control on the MoCA
interface if this value is 'false'.
Access control applies to subsequent MoCA node admission.
Context
- MIB
- MOCA11-MIB
- OID
.1.3.6.1.4.1.31621.1.1.1.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mocaIfConfigEntry
- Table
- mocaIfConfigTable
- Siblings
- 13
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mocaIfEnable Enable the MoCA interface if this value is 'true'. Disable the
MoCA interface if this value is 'false'.
If this managed object is disabled, it may not be possible … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.31621.1.1.1.1.1.1 |
| mocaIfPhyThreshold Specify a minimum PHY rate.
If transmit PHY rate between all pairs of MoCA nodes are greater
than or equal to this value, then transmit PHY rate of one pair
of MoCA… | column | MocaPhyRate | .1.3.6.1.4.1.31621.1.1.1.1.1.11 |
| mocaIfPhyThresholdEnable If transmit PHY rate between all pairs of MoCA nodes are
greater than or equal to 'mocaIfPhyThreshold', then transmit PHY
rate of one pair of MoCA node is less than 'mocaIfPhyThre… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.31621.1.1.1.1.1.12 |
| mocaIfStatusChangeEnable If 'mocaIfStatusChangeEnable' is 'true' and 'mocaIfStatus'
changes, then the trap 'mocaTrapIfStatusChange' is sent. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.31621.1.1.1.1.1.13 |
| mocaIfNumNodesChangeEnable If 'mocaIfNumNodesChangeEnable' is 'true' and 'mocaIfNumNodes'
changes, then the trap 'mocaTrapIfNumNodesChange' is sent.
Only one node in the MoCA network should s… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.31621.1.1.1.1.1.14 |
| mocaIfChannelMask Specify a list of RF center frequencies represented by a
bitmask which this MoCA node is allowed to form or join a MoCA
network.
If the new list of frequencies does… | column | MocaChannelMask | .1.3.6.1.4.1.31621.1.1.1.1.1.2 |
| mocaIfPowerControl Enable automatic power control if this value is 'true'. Use a
fixed transmit power level if this value is 'false'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.31621.1.1.1.1.1.3 |
| mocaIfTxPowerLimit Specify the transmit power BACKOFF in dB. The transmit power
SHALL only be changed when the device 'mocaIfStatus' object is
not 'linkUp', which means the interface is not part of… | column | MocaDB | .1.3.6.1.4.1.31621.1.1.1.1.1.4 |
| mocaIfBeaconPowerLimit Specify the beacon transmit power BACKOFF in dB. The beacon
transmit power SHALL only be changed when the device
'mocaIfStatus' object is not 'linkUp', which means the
interface … | column | MocaDB | .1.3.6.1.4.1.31621.1.1.1.1.1.5 |
| mocaIfPowerControlTargetRate Specify the target transmit PHY rate in Mbps for the power
control algorithm. This change should be used in the next
maintenance cycle in the MoCA network. | column | MocaPhyRate | .1.3.6.1.4.1.31621.1.1.1.1.1.6 |
| mocaIfPrivacyEnable Enable link privacy if this value is 'true', and use the
'mocaIfPassword' to generate the MAC management key and initial
privacy management key. Disable link privacy and do not p… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.31621.1.1.1.1.1.7 |
| mocaIfPassword Specify the MoCA password using an ASCII numeric string.
This value must be 12 to 17 decimal digits long. Access is only
allowed when used with SNMPv3 protocol, bu… | column | OctetString | .1.3.6.1.4.1.31621.1.1.1.1.1.8 |
| mocaIfPreferredNC Set this node as preferred NC if this value is 'true'. Do not
set this node as preferred NC if this value is 'false'.
This value can be ignored by this MoC… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.31621.1.1.1.1.1.9 |