upsmgConfigExtAlarmNum
MG-SNMP-UPS-MIB ·
.1.3.6.1.4.1.705.1.4.24
Object
scalar
mandatory
Integer32
The number of environ external alarm, value is between 8 and 32..
Context
- MIB
- MG-SNMP-UPS-MIB
- OID
.1.3.6.1.4.1.705.1.4.24- Type
- scalar
- Access
- readonly
- Status
- mandatory
- Parent
- upsmgConfig
- Siblings
- 33
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| upsmgConfigBatteryInstalled mandatory The battery installed status. | scalar | Enumeration | .1.3.6.1.4.1.705.1.4.1 |
| upsmgConfigShutdownTimer mandatory To set ups shutdown timer from on battery condition. | scalar | Integer32 | .1.3.6.1.4.1.705.1.4.10 |
| upsmgConfigSysShutDuration mandatory To set ups shutdown delay (Sn delay). | scalar | Integer32 | .1.3.6.1.4.1.705.1.4.11 |
| upsmgConfigVARating mandatory The UPS nominal VA rating. | scalar | Integer32 | .1.3.6.1.4.1.705.1.4.12 |
| upsmgConfigLowTransfer mandatory The low voltage transfer point. | scalar | Integer32 | .1.3.6.1.4.1.705.1.4.13 |
| upsmgConfigHighTransfer mandatory The high voltage transfer point. | scalar | Integer32 | .1.3.6.1.4.1.705.1.4.14 |
| upsmgConfigOutputNominalVoltage mandatory The nominal output voltage. | scalar | Integer32 | .1.3.6.1.4.1.705.1.4.15 |
| upsmgConfigOutputNominalCurrent mandatory The nominal output current. | scalar | Integer32 | .1.3.6.1.4.1.705.1.4.16 |
| upsmgConfigOutputNomFrequency mandatory The nominal output frequency. | scalar | Integer32 | .1.3.6.1.4.1.705.1.4.17 |
| upsmgConfigByPassType mandatory The UPS by pass switch type. | scalar | Enumeration | .1.3.6.1.4.1.705.1.4.18 |
| upsmgConfigAlarmAudible mandatory To set audible alarm status. | scalar | Enumeration | .1.3.6.1.4.1.705.1.4.19 |
| upsmgConfigNominalBatteryVoltage mandatory The nominal battery voltage. | scalar | Integer32 | .1.3.6.1.4.1.705.1.4.2 |
| upsmgConfigAlarmTimeDelay mandatory To set audible alarm time delay. | scalar | Integer32 | .1.3.6.1.4.1.705.1.4.20 |
| upsmgConfigDevicesNum mandatory The number of devices that are powered by the UPS. | scalar | Integer32 | .1.3.6.1.4.1.705.1.4.21 |
| upsmgConfigDevicesTable mandatory The table of devices that are powered by the UPS. | table | - | .1.3.6.1.4.1.705.1.4.22 |
| upsmgConfigReceptaclesTable mandatory The table of receptacles. | table | - | .1.3.6.1.4.1.705.1.4.23 |
| upsmgConfigExtAlarmTable mandatory The table of environmental external alarms. | table | - | .1.3.6.1.4.1.705.1.4.25 |
| upsmgConfigEmergencyTestFail mandatory The emergency condition status on Battery test fail. | scalar | Enumeration | .1.3.6.1.4.1.705.1.4.26 |
| upsmgConfigEmergencyOnByPass mandatory The emergency condition status on By Pass. | scalar | Enumeration | .1.3.6.1.4.1.705.1.4.27 |
| upsmgConfigEmergencyOverload mandatory The emergency condition status on overload. | scalar | Enumeration | .1.3.6.1.4.1.705.1.4.28 |
| upsmgConfigControlDayTable mandatory The table of daily on/off time. | table | - | .1.3.6.1.4.1.705.1.4.29 |
| upsmgConfigNominalBatteryTime mandatory The full load battery autonomy time. | scalar | Integer32 | .1.3.6.1.4.1.705.1.4.3 |
| upsmgConfigLowBooster mandatory To set UPS booster low threshold. | scalar | Integer32 | .1.3.6.1.4.1.705.1.4.30 |
| upsmgConfigHighBooster mandatory To set UPS booster high threshold. | scalar | Integer32 | .1.3.6.1.4.1.705.1.4.31 |
| upsmgConfigLowFader mandatory To set UPS fader low threshold. | scalar | Integer32 | .1.3.6.1.4.1.705.1.4.32 |
| upsmgConfigHighFader mandatory To set UPS fader high threshold. | scalar | Integer32 | .1.3.6.1.4.1.705.1.4.33 |
| upsmgConfigEnvironmentTable mandatory The table containing the configuration of the environment sensor. | table | - | .1.3.6.1.4.1.705.1.4.34 |
| upsmgConfigNominalRechargeTime mandatory The recharge time to go from low battery cut off
to full charge at full load. | scalar | Integer32 | .1.3.6.1.4.1.705.1.4.4 |
| upsmgConfigMinRechargeLevel mandatory The minimum battery level required to supply power on the
loads after low battery condition turn off and restart on
main return. | scalar | Integer32 | .1.3.6.1.4.1.705.1.4.5 |
| upsmgConfigMaxRechargeTime mandatory The maximum time delay of battery recharge before supply
power to the loads. | scalar | Integer32 | .1.3.6.1.4.1.705.1.4.6 |
| upsmgConfigLowBatteryTime mandatory To set remaining time value for low battery condition. | scalar | Integer32 | .1.3.6.1.4.1.705.1.4.7 |
| upsmgConfigLowBatteryLevel mandatory To set battery level value for low battery condition. | scalar | Integer32 | .1.3.6.1.4.1.705.1.4.8 |
| upsmgConfigAutoRestart mandatory The automatic restart enabling status. | scalar | Enumeration | .1.3.6.1.4.1.705.1.4.9 |