metro1500ClockFreq
METRO1500-MIB ·
.1.3.6.1.4.1.2544.1.3.5.1.1.12
Object
column
mandatory
Integer32
Frequency of the Clock in MBit/s. Only available if a Clock is installed.
Context
- MIB
- METRO1500-MIB
- OID
.1.3.6.1.4.1.2544.1.3.5.1.1.12- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- metro1500ConverterEntry
- Table
- metro1500ConverterTable
- Siblings
- 14
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| metro1500ConverterNumber mandatory Slot Number of installed Converter Card | column | Integer32 | .1.3.6.1.4.1.2544.1.3.5.1.1.1 |
| metro1500RxRem2 mandatory 2nd Remote receiver has Signal (On) or Loss
of Signal (Off).
(Only available if a 2nd Remote Receiver is
installed) | column | Enumeration | .1.3.6.1.4.1.2544.1.3.5.1.1.10 |
| metro1500ClockState mandatory Status of the Clock. This Entry is only available
if a Clock is installed. If the Clock is enabled,
and has an error output, and cannot synchronize to
the Signal, the Clock fails. | column | Enumeration | .1.3.6.1.4.1.2544.1.3.5.1.1.11 |
| metro1500LocLoop mandatory Local Loop is set to On or to Off | column | Enumeration | .1.3.6.1.4.1.2544.1.3.5.1.1.13 |
| metro1500RemLoop mandatory Remote Loop is set to On or to Off | column | Enumeration | .1.3.6.1.4.1.2544.1.3.5.1.1.14 |
| metro1500ClockType mandatory Type of the Clock. Only available, if a Clock is installed. | column | Enumeration | .1.3.6.1.4.1.2544.1.3.5.1.1.15 |
| metro1500RxLoc mandatory Local Receiver has Signal (On) or Loss
of Signal (Off) | column | Enumeration | .1.3.6.1.4.1.2544.1.3.5.1.1.2 |
| metro1500TxLoc mandatory Local Transmitter is On or Off | column | Enumeration | .1.3.6.1.4.1.2544.1.3.5.1.1.3 |
| metro1500TxLocC mandatory Current of the local Transmitter in mA.
This Entry is only available if a Current Sensor is
installed | column | Integer32 | .1.3.6.1.4.1.2544.1.3.5.1.1.4 |
| metro1500TxLocTemp mandatory Temperature of the local Transmitter in Celsius.
This Entry is only available if the Laser is cooled | column | Integer32 | .1.3.6.1.4.1.2544.1.3.5.1.1.5 |
| metro1500RxRem mandatory Remote Receiver has Signal (On) or Loss
of Signal (Off) | column | Enumeration | .1.3.6.1.4.1.2544.1.3.5.1.1.6 |
| metro1500TxRem mandatory Remote Transmitter is On or Off | column | Enumeration | .1.3.6.1.4.1.2544.1.3.5.1.1.7 |
| metro1500TxRemC mandatory Current of the Remote Transmitter in Milli Ampere.
This Entry is only available if a Current Sensor is
installed | column | Integer32 | .1.3.6.1.4.1.2544.1.3.5.1.1.8 |
| metro1500TxRemTemp mandatory Temperature of the Remote Transmitter in Celsius
This Entry is only available if the Laser is cooled | column | Integer32 | .1.3.6.1.4.1.2544.1.3.5.1.1.9 |