mellanoxIfVPIPortXmitWait

MELLANOX-IF-VPI-MIB · .1.3.6.1.4.1.33049.3.1.1.1.5
MIB view Table view

Object

column SNMPv2-SMICounter64 
A VPI counter.
The number of ticks during which the port selected by PortSelect
had data to transmit but no data was sent during the entire
tick either because of insufficient credits or because of lack of 
arbitration.

Context

MIB
MELLANOX-IF-VPI-MIB
OID
.1.3.6.1.4.1.33049.3.1.1.1.5
Type
column
Access
readonly
Status
current
Parent
mellanoxIfVPIEntry
Table
mellanoxIfVPITable
Siblings
20

Syntax

SNMPv2-SMICounter64
Source
SNMPv2-SMICounter64
Base type
Unsigned64

Values & Constraints

Type Constraints
range: 0..18446744073709551615

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
mellanoxIfVPIIndex
The index of this table (taken from System II ifIndex)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.33049.3.1.1.1.1
mellanoxIfVPIIbLocalIdentifier
This field will only be used in L3 interfaces on IB router systems. For L3 IB interfaces, this field will display the local identifier (lid) of the subnet. In other…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.33049.3.1.1.1.10
mellanoxIfVPI64bytePkts
Total number of packets with a length of 64 bytes.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.33049.3.1.1.1.11
mellanoxIfVPI65to127bytePkts
Total number of packets with a length between 65 and 127 bytes.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.33049.3.1.1.1.12
mellanoxIfVPI128to255bytePkts
Total number of packets with a length between 128 and 255 bytes.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.33049.3.1.1.1.13
mellanoxIfVPI256to511bytePkts
Total number of packets with a length between 256 and 511 bytes.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.33049.3.1.1.1.14
mellanoxIfVPI512to1023bytePkts
Total number of packets with a length between 512 and 1023 bytes.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.33049.3.1.1.1.15
mellanoxIfVPI1024to1518bytePkts
Total number of packets with a length between 1024 and 1518 bytes.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.33049.3.1.1.1.16
mellanoxIfVPIJumboPkts
Total number of Jumbo-sized packets (bigger than 1518 bytes).
columnSNMPv2-SMICounter64.1.3.6.1.4.1.33049.3.1.1.1.17
mellanoxIfVPIUndersizedPkts
Total number of undersized packets (smaller than 64 bytes).
columnSNMPv2-SMICounter64.1.3.6.1.4.1.33049.3.1.1.1.18
mellanoxIfVPIOversizedPkts
Total number of oversized packets (bigger than 9216 bytes).
columnSNMPv2-SMICounter64.1.3.6.1.4.1.33049.3.1.1.1.19
mellanoxIfVPIIbPortPhysicalState
Infiniband Port physical state
columnEnumeration.1.3.6.1.4.1.33049.3.1.1.1.2
mellanoxIfVPIUnknownControlOpcode
Total number of unknown control opcodes.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.33049.3.1.1.1.20
mellanoxIfVPIFCSErrors
Total number of Frame Check Sequence errors.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.33049.3.1.1.1.21
mellanoxIfVPIIbPortLogicalState
Infiniband Port logical state
columnEnumeration.1.3.6.1.4.1.33049.3.1.1.1.3
mellanoxIfVPIIbPortGuid
Infiniband PortGuid (64 bits length) - Value shall differ for each end port on a CA or router , but the same for all ports of a switch.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.33049.3.1.1.1.4
mellanoxIfVPISymbolErrorCounter
A VPI counter Total number of minor link errors detected on one or more physical lanes.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.33049.3.1.1.1.6
mellanoxIfVPIPortAdminSpeed
The interface's configured bandwidth in units of 1,000,000 bits per second. This value is represented in a similar way to the ifHighSpeed column in IF-MIB.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.33049.3.1.1.1.7
mellanoxIfVPISubnetName
This field will only be used in IB router systems. For mapped IB ports, this field will display the name of the subnet the port is mapped to. For L3 IB interfaces: …
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.33049.3.1.1.1.8
mellanoxIfVPISubnetPrefix
This field will only be used in IB systems. For L2 IB ports: the prefix of the subnet the port is mapped to. For L3 IB interfaces: the prefix assigned to them. In o…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.33049.3.1.1.1.9