mellanoxIfVPIIbPortPhysicalState
MELLANOX-IF-VPI-MIB ·
.1.3.6.1.4.1.33049.3.1.1.1.2
Object
column
Enumeration
Infiniband Port physical state
Context
- MIB
- MELLANOX-IF-VPI-MIB
- OID
.1.3.6.1.4.1.33049.3.1.1.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- mellanoxIfVPIEntry
- Table
- mellanoxIfVPITable
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | noStateChange |
1 | sleep |
2 | polling |
3 | disabled |
4 | portConfigurationTraining |
5 | linkUp |
6 | linkErrorRecovery |
7 | phyTest |
100 | notAvailable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mellanoxIfVPIIndex The index of this table (taken from System II ifIndex) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.33049.3.1.1.1.1 |
| mellanoxIfVPIIbLocalIdentifier This field will only be used in L3 interfaces on IB router systems.
For L3 IB interfaces, this field will display the local identifier (lid) of the subnet.
In other… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.33049.3.1.1.1.10 |
| mellanoxIfVPI64bytePkts Total number of packets with a length of 64 bytes. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.33049.3.1.1.1.11 |
| mellanoxIfVPI65to127bytePkts Total number of packets with a length between 65 and 127 bytes. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.33049.3.1.1.1.12 |
| mellanoxIfVPI128to255bytePkts Total number of packets with a length between 128 and 255 bytes. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.33049.3.1.1.1.13 |
| mellanoxIfVPI256to511bytePkts Total number of packets with a length between 256 and 511 bytes. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.33049.3.1.1.1.14 |
| mellanoxIfVPI512to1023bytePkts Total number of packets with a length between 512 and 1023 bytes. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.33049.3.1.1.1.15 |
| mellanoxIfVPI1024to1518bytePkts Total number of packets with a length between 1024 and 1518 bytes. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.33049.3.1.1.1.16 |
| mellanoxIfVPIJumboPkts Total number of Jumbo-sized packets (bigger than 1518 bytes). | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.33049.3.1.1.1.17 |
| mellanoxIfVPIUndersizedPkts Total number of undersized packets (smaller than 64 bytes). | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.33049.3.1.1.1.18 |
| mellanoxIfVPIOversizedPkts Total number of oversized packets (bigger than 9216 bytes). | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.33049.3.1.1.1.19 |
| mellanoxIfVPIUnknownControlOpcode Total number of unknown control opcodes. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.33049.3.1.1.1.20 |
| mellanoxIfVPIFCSErrors Total number of Frame Check Sequence errors. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.33049.3.1.1.1.21 |
| mellanoxIfVPIIbPortLogicalState Infiniband Port logical state | column | Enumeration | .1.3.6.1.4.1.33049.3.1.1.1.3 |
| mellanoxIfVPIIbPortGuid Infiniband PortGuid (64 bits length) -
Value shall differ for each end port on a CA or router
, but the same for all ports of a switch. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.33049.3.1.1.1.4 |
| mellanoxIfVPIPortXmitWait A VPI counter.
The number of ticks during which the port selected by PortSelect
had data to transmit but no data was sent during the entire
tick either because of insufficient cre… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.33049.3.1.1.1.5 |
| mellanoxIfVPISymbolErrorCounter A VPI counter
Total number of minor link errors detected on one or more physical
lanes. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.33049.3.1.1.1.6 |
| mellanoxIfVPIPortAdminSpeed The interface's configured bandwidth in units of 1,000,000 bits per
second. This value is represented in a similar way to the ifHighSpeed
column in IF-MIB. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.33049.3.1.1.1.7 |
| mellanoxIfVPISubnetName This field will only be used in IB router systems.
For mapped IB ports, this field will display the name of the subnet the port is mapped to.
For L3 IB interfaces: … | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.33049.3.1.1.1.8 |
| mellanoxIfVPISubnetPrefix This field will only be used in IB systems.
For L2 IB ports: the prefix of the subnet the port is mapped to.
For L3 IB interfaces: the prefix assigned to them.
In o… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.33049.3.1.1.1.9 |