mefSoamLmThresholdCfgForwardAvailRatioThreshold
MEF-SOAM-PM-MIB ·
.1.3.6.1.4.1.15007.1.3.1.2.7.1.14
Object
column
r/w
milli-percent Unsigned32
This object is used to set the forward availability/total time
ratio threshold value that will be used to determine if a threshold
notification is generated if the ratio drops below the configured
value.
The ratio value is expressed as a percent with a value of 0 (ratio
0.00) through 100000 (ratio 1.00)
Units are in milli-percent, where 1 indicates 0.001 percent.
Context
- MIB
- MEF-SOAM-PM-MIB
- OID
.1.3.6.1.4.1.15007.1.3.1.2.7.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Units
- milli-percent
- Parent
- mefSoamLmThresholdCfgEntry
- Table
- mefSoamLmThresholdCfgTable
- Siblings
- 16
Syntax
milli-percent Unsigned32
Values & Constraints
Object Constraints
range: 0-100000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mefSoamLmThresholdCfgIndex The index of the threshold number for the specific LM
threshold entry.
An index value of '1' needs to be supported. Other index values
can also be supported. | column | Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.7.1.1 |
| mefSoamLmThresholdCfgForwardConsecutiveHighLossThreshold This object is used to set the consecutive forward high loss
threshold value that will be used to determine if a threshold
notification is generated. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.7.1.10 |
| mefSoamLmThresholdCfgBackwardHighLossThreshold This object is used to set the backward high loss threshold value that
will be used to determine if a threshold notification is generated. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.7.1.11 |
| mefSoamLmThresholdCfgBackwardConsecutiveHighLossThreshold This object is used to set the consecutive backward high loss
threshold value that will be used to determine if a threshold
notification is generated. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.7.1.12 |
| mefSoamLmThresholdCfgForwardUnavailCountThreshold This object is used to set the forward unavailability
threshold value that will be used to determine if a threshold
notification is generated. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.7.1.13 |
| mefSoamLmThresholdCfgBackwardUnavailCountThreshold This object is used to set the backward unavailability
threshold value that will be used to determine if a threshold
notification is generated. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.7.1.15 |
| mefSoamLmThresholdCfgBackwardAvailRatioThreshold This object is used to set the backward availability/total time
ratio threshold value that will be used to determine if a threshold
notification is generated if the ratio drops b… | column | milli-percent Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.7.1.16 |
| mefSoamLmThresholdCfgRowStatus The status of the row.
The writable columns in a row cannot be changed if the row
is active. All columns are to have a valid value before a row
can be activated. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.15007.1.3.1.2.7.1.17 |
| mefSoamLmThresholdCfgEnable A vector of bits that indicates the type of SOAM LM thresholds
notifications that are enabled.
A bit set to '1' enables the specific SOAM LM threshold notification… | column | Bits | .1.3.6.1.4.1.15007.1.3.1.2.7.1.2 |
| mefSoamLmThresholdCfgMeasuredFlrForwardThreshold This object is used to set the measured forward frame loss ratio
threshold value that will be used to determine if a threshold
notification is generated. | column | milli-percent Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.7.1.3 |
| mefSoamLmThresholdCfgMaxFlrForwardThreshold This object is used to set the maximum forward frame loss ratio
threshold value that will be used to determine if a threshold
notification is generated. | column | milli-percent Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.7.1.4 |
| mefSoamLmThresholdCfgAvgFlrForwardThreshold This object is used to set the average forward frame loss ratio
threshold value that will be used to determine if a threshold
notification is generated. | column | milli-percent Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.7.1.5 |
| mefSoamLmThresholdCfgMeasuredFlrBackwardThreshold This object is used to set the measured backward frame loss ratio
threshold value that will be used to determine if a threshold
notification is generated. | column | milli-percent Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.7.1.6 |
| mefSoamLmThresholdCfgMaxFlrBackwardThreshold This object is used to set the maximum backward frame loss ratio
threshold value that will be used to determine if a threshold
notification is generated. | column | milli-percent Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.7.1.7 |
| mefSoamLmThresholdCfgAvgFlrBackwardThreshold This object is used to set the average backward frame loss ratio
threshold value that will be used to determine if a threshold
notification is generated. | column | milli-percent Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.7.1.8 |
| mefSoamLmThresholdCfgForwardHighLossThreshold This object is used to set the forward high loss threshold value that
will be used to determine if a threshold notification is generated. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.7.1.9 |