mefSoamLmThresholdCfgEnable

MEF-SOAM-PM-MIB · .1.3.6.1.4.1.15007.1.3.1.2.7.1.2
MIB view Table view

Object

column r/w Bits 
A vector of bits that indicates the type of SOAM LM thresholds
notifications that are enabled. 
              
A bit set to '1' enables the specific SOAM LM threshold notification 
and when the specific counter is enabled and the threshold is crossed a
notification is generated. 
              
A bit set to '0' disables the specific SOAM LM threshold notification.
              
If a particular SOAM LM threshold is not supported the BIT value is
set to '0'.
              
bMefSoamLmMeasuredFlrForwardThreshold(0)
        Enables/disables measured frame loss forward ratio threshold 
        notification. The notification is sent immediately when the
        mefSoamLmMeasuredStatsForwardFlr value is 
        greater than or equal to the threshold value.
bMefSoamLmMaxFlrForwardThreshold(1)
        Enables/disables maximum frame loss forward ratio threshold 
        notification. The notification is sent immediately when the
        mefSoamLmCurrentStatsForwardMaxFlr value is greater
        than or equal to threshold value in a Measurement Interval.
bMefSoamLmAvgFlrForwardThreshold(2)
        Enables/disables average frame loss forward ratio threshold
        notification. The notification is sent when at the end of a
        Measurement Interval if the 
        mefSoamLmCurrentStatsForwardAvgFlr value is greater
        than or equal to the threshold value.
bMefSoamLmMeasuredFlrBackwardThreshold(3)
        Enables/disables measured frame loss backward ratio threshold 
        notification. The notification is sent immediately when the
        mefSoamLmMeasuredStatsBackwardFlr value is 
        greater than or equal to the threshold value.
bMefSoamLmMaxFlrBackwardThreshold(4)
        Enables/disables maximum frame loss backward ratio threshold 
        notification. The notification is sent immediately when the
        mefSoamLmCurrentStatsBackwardMaxFlr value is greater
        than or equal to threshold value in a Measurement Interval.
bMefSoamLmAvgFlrBackwardThreshold(5)
        Enables/disables average frame loss backward ratio threshold
        notification. The notification is sent when at the end of a
        Measurement Interval if the 
        mefSoamLmCurrentStatsBackwardAvgFlr value is
        greater than or equal to the threshold value.
bMefSoamLmForwardHighLossThreshold(6)
        Enables/disables forward high loss threshold
        notification. The notification is sent immediately when the 
        mefSoamLmCurrentAvailStatsForwardHighLoss value is
        greater than or equal to the threshold value in a measurement
        interval.
bMefSoamLmForwardConsecutiveHighLossThreshold(7)
        Enables/disables forward consecutive high loss threshold
        notification. The notification is sent immediately when the 
        mefSoamLmCurrentAvailStatsForwardConsecutiveHighLoss value is
        greater than or equal to the threshold value in a measurement
        interval.
bMefSoamLmBackwardHighLossThreshold(8)
        Enables/disables backward high loss threshold
        notification. The notification is sent immediately when the 
        mefSoamLmCurrentAvailStatsBackwardHighLoss value is
        greater than or equal to the threshold value in a measurement
        interval.
bMefSoamLmBackwardConsecutiveHighLossThreshold(9)
        Enables/disables backward consecutive high loss threshold
        notification. The notification is sent immediately when the 
        mefSoamLmCurrentAvailStatsBackwardConsecutiveHighLoss value is
        greater than or equal to the threshold value in a measurement
        interval.
bMefSoamLmUnavailForwardThreshold(10)
        Enables/disables unavailable forward threshold 
        notification. The notification is sent immediately when the
        mefSoamLmCurrentAvailStatsForwardUnavailable value is 
        greater than or equal to threshold value in a Measurement Interval.
bMefSoamLmAvailRatioForwardThreshold(11)
        Enables/disables availability ratio forward threshold 
        notification. The notification is sent immediately when the
        availability ratio is greater than or equal to threshold value
        in a Measurement Interval.  The availability ratio can be calculated
        from the values of mefSoamLmCurrentAvailStatsForwardAvailable and
        mefSoamLmCurrentAvailStatsForwardUnavailable.
bMefSoamLmUnavailBackwardThreshold(12)
        Enables/disables unavailable backward threshold 
        notification. The notification is sent immediately when the
        mefSoamLmCurrentAvailStatsBackwardUnavailable value is 
        greater than or equal to threshold value in a Measurement Interval.
bMefSoamLmAvailRatioBackwardThreshold(13)
        Enables/disables availability ratio backward threshold 
        notification. The notification is sent immediately when the
        availability ratio is greater than or equal to threshold value
        in a Measurement Interval.  The availability ratio can be calculated
        from the values of mefSoamLmCurrentAvailStatsBackwardAvailable and
        mefSoamLmCurrentAvailStatsBackwardUnavailable.

Context

MIB
MEF-SOAM-PM-MIB
OID
.1.3.6.1.4.1.15007.1.3.1.2.7.1.2
Type
column
Access
readwrite
Status
current
Parent
mefSoamLmThresholdCfgEntry
Table
mefSoamLmThresholdCfgTable
Siblings
16

Syntax

Bits

Values & Constraints

Enumerated Values
0bMefSoamLmMeasuredFlrForwardThreshold
1bMefSoamLmMaxFlrForwardThreshold
2bMefSoamLmAvgFlrForwardThreshold
3bMefSoamLmMeasuredFlrBackwardThreshold
4bMefSoamLmMaxFlrBackwardThreshold
5bMefSoamLmAvgFlrBackwardThreshold
6bMefSoamLmForwardHighLossThreshold
7bMefSoamLmForwardConsecutiveHighLossThreshold
8bMefSoamLmBackwardHighLossThreshold
9bMefSoamLmBackwardConsecutiveHighLossThreshold
10bMefSoamLmUnavailForwardThreshold
11bMefSoamLmAvailRatioForwardThreshold
12bMefSoamLmUnavailBackwardThreshold
13bMefSoamLmAvailRatioBackwardThreshold

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
mefSoamLmThresholdCfgIndex
The index of the threshold number for the specific LM threshold entry. An index value of '1' needs to be supported. Other index values can also be supported.
columnUnsigned32.1.3.6.1.4.1.15007.1.3.1.2.7.1.1
mefSoamLmThresholdCfgForwardConsecutiveHighLossThreshold
This object is used to set the consecutive forward high loss threshold value that will be used to determine if a threshold notification is generated.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.15007.1.3.1.2.7.1.10
mefSoamLmThresholdCfgBackwardHighLossThreshold
This object is used to set the backward high loss threshold value that will be used to determine if a threshold notification is generated.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.15007.1.3.1.2.7.1.11
mefSoamLmThresholdCfgBackwardConsecutiveHighLossThreshold
This object is used to set the consecutive backward high loss threshold value that will be used to determine if a threshold notification is generated.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.15007.1.3.1.2.7.1.12
mefSoamLmThresholdCfgForwardUnavailCountThreshold
This object is used to set the forward unavailability threshold value that will be used to determine if a threshold notification is generated.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.15007.1.3.1.2.7.1.13
mefSoamLmThresholdCfgForwardAvailRatioThreshold
This object is used to set the forward availability/total time ratio threshold value that will be used to determine if a threshold notification is generated if the ratio drops be…
columnmilli-percent Unsigned32.1.3.6.1.4.1.15007.1.3.1.2.7.1.14
mefSoamLmThresholdCfgBackwardUnavailCountThreshold
This object is used to set the backward unavailability threshold value that will be used to determine if a threshold notification is generated.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.15007.1.3.1.2.7.1.15
mefSoamLmThresholdCfgBackwardAvailRatioThreshold
This object is used to set the backward availability/total time ratio threshold value that will be used to determine if a threshold notification is generated if the ratio drops b…
columnmilli-percent Unsigned32.1.3.6.1.4.1.15007.1.3.1.2.7.1.16
mefSoamLmThresholdCfgRowStatus
The status of the row. The writable columns in a row cannot be changed if the row is active. All columns are to have a valid value before a row can be activated.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.15007.1.3.1.2.7.1.17
mefSoamLmThresholdCfgMeasuredFlrForwardThreshold
This object is used to set the measured forward frame loss ratio threshold value that will be used to determine if a threshold notification is generated.
columnmilli-percent Unsigned32.1.3.6.1.4.1.15007.1.3.1.2.7.1.3
mefSoamLmThresholdCfgMaxFlrForwardThreshold
This object is used to set the maximum forward frame loss ratio threshold value that will be used to determine if a threshold notification is generated.
columnmilli-percent Unsigned32.1.3.6.1.4.1.15007.1.3.1.2.7.1.4
mefSoamLmThresholdCfgAvgFlrForwardThreshold
This object is used to set the average forward frame loss ratio threshold value that will be used to determine if a threshold notification is generated.
columnmilli-percent Unsigned32.1.3.6.1.4.1.15007.1.3.1.2.7.1.5
mefSoamLmThresholdCfgMeasuredFlrBackwardThreshold
This object is used to set the measured backward frame loss ratio threshold value that will be used to determine if a threshold notification is generated.
columnmilli-percent Unsigned32.1.3.6.1.4.1.15007.1.3.1.2.7.1.6
mefSoamLmThresholdCfgMaxFlrBackwardThreshold
This object is used to set the maximum backward frame loss ratio threshold value that will be used to determine if a threshold notification is generated.
columnmilli-percent Unsigned32.1.3.6.1.4.1.15007.1.3.1.2.7.1.7
mefSoamLmThresholdCfgAvgFlrBackwardThreshold
This object is used to set the average backward frame loss ratio threshold value that will be used to determine if a threshold notification is generated.
columnmilli-percent Unsigned32.1.3.6.1.4.1.15007.1.3.1.2.7.1.8
mefSoamLmThresholdCfgForwardHighLossThreshold
This object is used to set the forward high loss threshold value that will be used to determine if a threshold notification is generated.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.15007.1.3.1.2.7.1.9