mefSoamLmCfgFrameSize
MEF-SOAM-PM-MIB ·
.1.3.6.1.4.1.15007.1.3.1.2.1.1.8
Object
column
r/w
bytes Unsigned32
This object specifies the Loss Measurement frame size between
64 bytes and the maximum transmission unit of the EVC.
The range of frame sizes from 64 through 2000 octets need to be
supported, and the range of frame sizes from 2001 through 9600 octets
is suggested be supported.
The adjustment to the frame size of the standard frame size is
accomplished by the addition of a Data or Test TLV. A Data or Test TLV
is only added to the frame if the frame size is greater than 64 bytes.
This object is only valid for the entity transmitting the Loss
Measurement frames, type 'lmSlm', and is ignored by the
entity receiving frames. It is not applicable for the 'lmCcm' or
'lmLmm' types.
This object can only be written at row creation time and cannot be
modified once it has been created.
Context
- MIB
- MEF-SOAM-PM-MIB
- OID
.1.3.6.1.4.1.15007.1.3.1.2.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Units
- bytes
- Parent
- mefSoamLmCfgEntry
- Table
- mefSoamLmCfgTable
- Siblings
- 33
Syntax
bytes Unsigned32
Values & Constraints
Object Constraints
range: 64-9600
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mefSoamLmCfgIndex An index to the Loss Measurement Configuration table which indicates
the specific measurement session for the MEP.
mefSoamPmMepOperNextIndex needs to be inspected t… | column | Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.1.1.1 |
| mefSoamLmCfgTestTlvIncluded Indicates whether a Test TLV or Data TLV is included when the size
of the LM frame is determined by the mefSoamLmFrameSize object.
A value of 'true' indicates that … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.15007.1.3.1.2.1.1.10 |
| mefSoamLmCfgTestTlvPattern This object specifies the type of test pattern to be
sent in the LM frame Test TLV when the size of LM PDU is
determined by the mefSoamLmFrameSize object and
mefSoamLmTestTlvInc… | column | MEF-SOAM-TC-MIBMefSoamTcTestPatternType | .1.3.6.1.4.1.15007.1.3.1.2.1.1.11 |
| mefSoamLmCfgMeasurementInterval This object specifies the Measurement Interval for FLR statistics, in minutes.
A Measurement Interval of 15 minutes needs to be supported, other intervals
may be su… | column | minutes Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.1.1.12 |
| mefSoamLmCfgNumIntervalsStored This object specifies the number of completed Measurement Intervals
to store in the history statistic table (mefSoamLmHistoryStatsTable)
and the history availability statistic tab… | column | Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.1.1.13 |
| mefSoamLmCfgDestMacAddress The Target or Destination MAC Address Field to be transmitted.
If mefSoamLmCfgType is 'lmCcm', the destination MAC address is always a
multicast address indicatin… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.15007.1.3.1.2.1.1.14 |
| mefSoamLmCfgDestMepId The Maintenance Association End Point Identifier of
another MEP in the same Maintenance Association to which
the SOAM LM frame is to be sent.
This address will be u… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.15007.1.3.1.2.1.1.15 |
| mefSoamLmCfgDestIsMepId A value of 'true' indicates that MEPID of the target MEP is used for
SOAM LM frame transmission.
A value of 'false' indicates that the MAC address of the
target MEP… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.15007.1.3.1.2.1.1.16 |
| mefSoamLmCfgStartTimeType This object specifies the type of start time of the SOAM LM
session. The start time can be disabled (none), immediate, relative,
or fixed.
The value of 'none' is il… | column | MEF-SOAM-TC-MIBMefSoamTcOperationTimeType | .1.3.6.1.4.1.15007.1.3.1.2.1.1.17 |
| mefSoamLmCfgFixedStartDateAndTime This object specifies the fixed start date/time for the
SOAM Loss Measurement session. This object is used only used if
mefSoamLmStartTimeType is 'fixed' and is ignored otherwis… | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.15007.1.3.1.2.1.1.18 |
| mefSoamLmCfgRelativeStartTime This object specifies the relative start time, from the
current system time, for the SOAM LM session. This
object is used only if mefSoamLmStartTimeType is 'relative' and is
ign… | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.15007.1.3.1.2.1.1.19 |
| mefSoamLmCfgType This object specifies what type of Loss Measurement
will be performed.
lmLmm(1) LMM SOAM PDU generated and received LMR responses tracked
lmSlm(2) SLM… | column | Enumeration | .1.3.6.1.4.1.15007.1.3.1.2.1.1.2 |
| mefSoamLmCfgStopTimeType This object specifies the type of stop time to terminate the
SOAM LM session. The stop time can be forever (none), relative, or
fixed.
The value of 'none' indicate… | column | MEF-SOAM-TC-MIBMefSoamTcOperationTimeType | .1.3.6.1.4.1.15007.1.3.1.2.1.1.20 |
| mefSoamLmCfgFixedStopDateAndTime This object specifies the fixed stop date/time for the
SOAM Loss Measurement session. This object is used only used
if mefSoamLmStopTimeType is 'fixed' and is ignored otherwise.… | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.15007.1.3.1.2.1.1.21 |
| mefSoamLmCfgRelativeStopTime This object specifies the relative stop time, from the
session start time, to stop the SOAM LM session. This
object is used only if mefSoamLmStopTimeType is 'relative' and is
ig… | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.15007.1.3.1.2.1.1.22 |
| mefSoamLmCfgRepetitionTime This object specifies a configurable repetition time between
Measurement Intervals in a Loss Measurement session, in seconds.
If the value is 0 (none), there is no … | column | seconds Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.1.1.23 |
| mefSoamLmCfgAlignMeasurementIntervals This object specifies whether the Measurement Intervals for
the Loss Measurement session are aligned with a zero offset to
real time.
The value 'true' indicates tha… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.15007.1.3.1.2.1.1.24 |
| mefSoamLmCfgAlignMeasurementOffset This object specifies the offset in minutes from the time of day value
if mefSoamLmCfgAlignMeasurementIntervals is 'true' and the repetition
time is a factor of 60 minutes. If n… | column | minutes Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.1.1.25 |
| mefSoamLmCfgAvailabilityMeasurementInterval This object specifies the availability Measurement Interval in
minutes.
A Measurement Interval of 15 minutes is to be supported, other intervals
can be supported.
… | column | minutes Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.1.1.26 |
| mefSoamLmCfgAvailabilityNumConsecutiveMeasPdus This object specifies a configurable number of consecutive
loss measurement PDUs to be used in evaluating the
availability/unavailability status of each availability
indicator pe… | column | Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.1.1.27 |
| mefSoamLmCfgAvailabilityFlrThreshold This object specifies a configurable availability threshold to be
used in evaluating the availability/unavailability status of an
availability indicator per MEF 10.2.1. The availa… | column | milli-percent Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.1.1.28 |
| mefSoamLmCfgAvailabilityNumConsecutiveIntervals This object specifies a configurable number of consecutive
availability indicators to be used to determine a change in the
availability status as indicated by MEF 10.2.1. This par… | column | Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.1.1.29 |
| mefSoamLmCfgVersion This object indicates the version of the PDUs used to perform
Loss Measurement.
The value is placed in the Version field of the PDU and indicates
that the PDU form… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.1.1.3 |
| mefSoamLmCfgAvailabilityNumConsecutiveHighFlr This object specifies a configurable number of consecutive
availability indicators to be used for assessing CHLI. This
parameter is equivalent to the Resilency parameter of 'p' a… | column | Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.1.1.30 |
| mefSoamLmCfgSessionType This object indicates whether the current session is defined to
be 'Proactive' or 'On-Demand'. A value of 'proactive'
indicates the current session is 'Proactive'. A value of 'onD… | column | MEF-SOAM-TC-MIBMefSoamTcSessionType | .1.3.6.1.4.1.15007.1.3.1.2.1.1.31 |
| mefSoamLmCfgSessionStatus This object indicates the current status of the LM session. A value
of 'active' indicates the current LM session is active, i.e. the current
time lies between the start time and t… | column | MEF-SOAM-TC-MIBMefSoamTcStatusType | .1.3.6.1.4.1.15007.1.3.1.2.1.1.32 |
| mefSoamLmCfgHistoryClear This object when written clears the Loss Measurement history
Table (mefSoamLmHistoryStatsTable) - all rows are deleted.
When read the value always returns 'false'.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.15007.1.3.1.2.1.1.33 |
| mefSoamLmCfgRowStatus The status of the row.
The writable columns in a row cannot be changed if the row
is active, except for mefSoamLmCfgHistoryClear and mefSoamLmCfgEnabled
objects. Al… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.15007.1.3.1.2.1.1.34 |
| mefSoamLmCfgEnabled This object specifies whether the Loss Measurement session
is enabled.
The value 'true' indicates the Loss Measurement session is enabled and
SOAM PDUs are sent an… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.15007.1.3.1.2.1.1.4 |
| mefSoamLmCfgMeasurementEnable A vector of bits that indicates the type of SOAM LM counters found
in the mefSoamLmMeasuredStatsTable, mefSoamLmCurrentStatsTable,
mefSoamLmHistoryStatsTable, mefSoamLmCurrentAva… | column | Bits | .1.3.6.1.4.1.15007.1.3.1.2.1.1.5 |
| mefSoamLmCfgMessagePeriod This object specifies the interval between Loss Measurement
OAM message transmission. For Loss Measurement monitoring
applications the default value is 1 sec.
Thi… | column | ms MEF-SOAM-TC-MIBMefSoamTcMeasurementPeriodType | .1.3.6.1.4.1.15007.1.3.1.2.1.1.6 |
| mefSoamLmCfgPriority This object specifies the Loss Measurement OAM message priority
as well as the priority of the service/OAM traffic to be monitored.
Only frames of the same Class of Service are co… | column | IEEE8021-TC-MIBIEEE8021PriorityValue | .1.3.6.1.4.1.15007.1.3.1.2.1.1.7 |
| mefSoamLmCfgDataPattern This object specifies the LM data pattern included in a Data TLV
when the size of the LM frame is determined by the
mefSoamLmFrameSize object and mefSoamLmTestTlvIncluded is 'fal… | column | MEF-SOAM-TC-MIBMefSoamTcDataPatternType | .1.3.6.1.4.1.15007.1.3.1.2.1.1.9 |