mefSoamLmCfgDestMepId

MEF-SOAM-PM-MIB · .1.3.6.1.4.1.15007.1.3.1.2.1.1.15

Object

column r/w IEEE8021-CFM-MIBDot1agCfmMepIdOrZero

The Maintenance Association End Point Identifier of
another MEP in the same Maintenance Association to which
the SOAM LM frame is to be sent.
              
This address will be used if the value of the column
mefSoamLmDestIsMepId is 'true'. A value of zero
means that the destination MEP ID has not been configured.
              
This object is only valid for the entity transmitting the Loss
Measurement frames, types 'lmLmm' and 'lmSlm'. It is not applicable for
the 'lmCcm' type.
              
This object can only be written at row creation time and cannot be 
modified once it has been created.

Context

MIB: MEF-SOAM-PM-MIB
OID: .1.3.6.1.4.1.15007.1.3.1.2.1.1.15
Type: column
Access: readwrite
Status: current
Parent: mefSoamLmCfgEntry
Table: mefSoamLmCfgTable
Siblings: 33

Syntax

IEEE8021-CFM-MIBDot1agCfmMepIdOrZero

Source: IEEE8021-CFM-MIBDot1agCfmMepIdOrZero
Base type: Unsigned32

Values & Constraints

Type Constraints

range: 0..8191

Related Objects

Sibling Objects

Object	Type	Syntax	OID
mefSoamLmCfgIndex An index to the Loss Measurement Configuration table which indicates the specific measurement session for the MEP. mefSoamPmMepOperNextIndex needs to be inspected t…	column	Unsigned32	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.1`
mefSoamLmCfgTestTlvIncluded Indicates whether a Test TLV or Data TLV is included when the size of the LM frame is determined by the mefSoamLmFrameSize object. A value of 'true' indicates that …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.10`
mefSoamLmCfgTestTlvPattern This object specifies the type of test pattern to be sent in the LM frame Test TLV when the size of LM PDU is determined by the mefSoamLmFrameSize object and mefSoamLmTestTlvInc…	column	MEF-SOAM-TC-MIBMefSoamTcTestPatternType	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.11`
mefSoamLmCfgMeasurementInterval This object specifies the Measurement Interval for FLR statistics, in minutes. A Measurement Interval of 15 minutes needs to be supported, other intervals may be su…	column	minutes Unsigned32	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.12`
mefSoamLmCfgNumIntervalsStored This object specifies the number of completed Measurement Intervals to store in the history statistic table (mefSoamLmHistoryStatsTable) and the history availability statistic tab…	column	Unsigned32	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.13`
mefSoamLmCfgDestMacAddress The Target or Destination MAC Address Field to be transmitted. If mefSoamLmCfgType is 'lmCcm', the destination MAC address is always a multicast address indicatin…	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.14`
mefSoamLmCfgDestIsMepId A value of 'true' indicates that MEPID of the target MEP is used for SOAM LM frame transmission. A value of 'false' indicates that the MAC address of the target MEP…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.16`
mefSoamLmCfgStartTimeType This object specifies the type of start time of the SOAM LM session. The start time can be disabled (none), immediate, relative, or fixed. The value of 'none' is il…	column	MEF-SOAM-TC-MIBMefSoamTcOperationTimeType	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.17`
mefSoamLmCfgFixedStartDateAndTime This object specifies the fixed start date/time for the SOAM Loss Measurement session. This object is used only used if mefSoamLmStartTimeType is 'fixed' and is ignored otherwis…	column	SNMPv2-TCDateAndTime	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.18`
mefSoamLmCfgRelativeStartTime This object specifies the relative start time, from the current system time, for the SOAM LM session. This object is used only if mefSoamLmStartTimeType is 'relative' and is ign…	column	SNMPv2-TCTimeInterval	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.19`
mefSoamLmCfgType This object specifies what type of Loss Measurement will be performed. lmLmm(1) LMM SOAM PDU generated and received LMR responses tracked lmSlm(2) SLM…	column	Enumeration	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.2`
mefSoamLmCfgStopTimeType This object specifies the type of stop time to terminate the SOAM LM session. The stop time can be forever (none), relative, or fixed. The value of 'none' indicate…	column	MEF-SOAM-TC-MIBMefSoamTcOperationTimeType	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.20`
mefSoamLmCfgFixedStopDateAndTime This object specifies the fixed stop date/time for the SOAM Loss Measurement session. This object is used only used if mefSoamLmStopTimeType is 'fixed' and is ignored otherwise.…	column	SNMPv2-TCDateAndTime	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.21`
mefSoamLmCfgRelativeStopTime This object specifies the relative stop time, from the session start time, to stop the SOAM LM session. This object is used only if mefSoamLmStopTimeType is 'relative' and is ig…	column	SNMPv2-TCTimeInterval	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.22`
mefSoamLmCfgRepetitionTime This object specifies a configurable repetition time between Measurement Intervals in a Loss Measurement session, in seconds. If the value is 0 (none), there is no …	column	seconds Unsigned32	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.23`
mefSoamLmCfgAlignMeasurementIntervals This object specifies whether the Measurement Intervals for the Loss Measurement session are aligned with a zero offset to real time. The value 'true' indicates tha…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.24`
mefSoamLmCfgAlignMeasurementOffset This object specifies the offset in minutes from the time of day value if mefSoamLmCfgAlignMeasurementIntervals is 'true' and the repetition time is a factor of 60 minutes. If n…	column	minutes Unsigned32	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.25`
mefSoamLmCfgAvailabilityMeasurementInterval This object specifies the availability Measurement Interval in minutes. A Measurement Interval of 15 minutes is to be supported, other intervals can be supported. …	column	minutes Unsigned32	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.26`
mefSoamLmCfgAvailabilityNumConsecutiveMeasPdus This object specifies a configurable number of consecutive loss measurement PDUs to be used in evaluating the availability/unavailability status of each availability indicator pe…	column	Unsigned32	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.27`
mefSoamLmCfgAvailabilityFlrThreshold This object specifies a configurable availability threshold to be used in evaluating the availability/unavailability status of an availability indicator per MEF 10.2.1. The availa…	column	milli-percent Unsigned32	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.28`
mefSoamLmCfgAvailabilityNumConsecutiveIntervals This object specifies a configurable number of consecutive availability indicators to be used to determine a change in the availability status as indicated by MEF 10.2.1. This par…	column	Unsigned32	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.29`
mefSoamLmCfgVersion This object indicates the version of the PDUs used to perform Loss Measurement. The value is placed in the Version field of the PDU and indicates that the PDU form…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.3`
mefSoamLmCfgAvailabilityNumConsecutiveHighFlr This object specifies a configurable number of consecutive availability indicators to be used for assessing CHLI. This parameter is equivalent to the Resilency parameter of 'p' a…	column	Unsigned32	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.30`
mefSoamLmCfgSessionType This object indicates whether the current session is defined to be 'Proactive' or 'On-Demand'. A value of 'proactive' indicates the current session is 'Proactive'. A value of 'onD…	column	MEF-SOAM-TC-MIBMefSoamTcSessionType	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.31`
mefSoamLmCfgSessionStatus This object indicates the current status of the LM session. A value of 'active' indicates the current LM session is active, i.e. the current time lies between the start time and t…	column	MEF-SOAM-TC-MIBMefSoamTcStatusType	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.32`
mefSoamLmCfgHistoryClear This object when written clears the Loss Measurement history Table (mefSoamLmHistoryStatsTable) - all rows are deleted. When read the value always returns 'false'. …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.33`
mefSoamLmCfgRowStatus The status of the row. The writable columns in a row cannot be changed if the row is active, except for mefSoamLmCfgHistoryClear and mefSoamLmCfgEnabled objects. Al…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.34`
mefSoamLmCfgEnabled This object specifies whether the Loss Measurement session is enabled. The value 'true' indicates the Loss Measurement session is enabled and SOAM PDUs are sent an…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.4`
mefSoamLmCfgMeasurementEnable A vector of bits that indicates the type of SOAM LM counters found in the mefSoamLmMeasuredStatsTable, mefSoamLmCurrentStatsTable, mefSoamLmHistoryStatsTable, mefSoamLmCurrentAva…	column	Bits	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.5`
mefSoamLmCfgMessagePeriod This object specifies the interval between Loss Measurement OAM message transmission. For Loss Measurement monitoring applications the default value is 1 sec. Thi…	column	ms MEF-SOAM-TC-MIBMefSoamTcMeasurementPeriodType	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.6`
mefSoamLmCfgPriority This object specifies the Loss Measurement OAM message priority as well as the priority of the service/OAM traffic to be monitored. Only frames of the same Class of Service are co…	column	IEEE8021-TC-MIBIEEE8021PriorityValue	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.7`
mefSoamLmCfgFrameSize This object specifies the Loss Measurement frame size between 64 bytes and the maximum transmission unit of the EVC. The range of frame sizes from 64 through 2000 …	column	bytes Unsigned32	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.8`
mefSoamLmCfgDataPattern This object specifies the LM data pattern included in a Data TLV when the size of the LM frame is determined by the mefSoamLmFrameSize object and mefSoamLmTestTlvIncluded is 'fal…	column	MEF-SOAM-TC-MIBMefSoamTcDataPatternType	`.1.3.6.1.4.1.15007.1.3.1.2.1.1.9`