me1200QosQceTableRowEditorActionPolicy
ME1200-QOS-MIB ·
.1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1010
Object
The policy number used for classification. Valid range is 0-63.
Context
- MIB
- ME1200-QOS-MIB
- OID
.1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1010- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- me1200QosQceTableRowEditor
- Siblings
- 72
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| me1200QosQceTableRowEditorQceId QCE Id index. | scalar | Integer32 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1 |
| me1200QosQceTableRowEditorVlanTagType Indicates the VLAN tag type to match. | scalar | ME1200VlanTagType | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.10 |
| me1200QosQceTableRowEditorFrameType Indicates the packet's frame type. Modifying the frame type on an
existing QCE will restore the content of all frame type dependent
configuration to default. | scalar | ME1200QceFrameType | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.100 |
| me1200QosQceTableRowEditorActionCosEnable If true, the packet is classified to the CoS value in ActionCos. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1000 |
| me1200QosQceTableRowEditorAction Action | scalar | ME1200-TCME1200RowEditorState | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.10000 |
| me1200QosQceTableRowEditorActionCos The CoS value used for classification. Valid range is 0-7. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1001 |
| me1200QosQceTableRowEditorActionDplEnable If true, the packet is classified to the DPL value in ActionDpl. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1002 |
| me1200QosQceTableRowEditorActionDpl The DPL value used for classification. Valid range is 0-1. | scalar | ME1200-TCME1200Unsigned8 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1003 |
| me1200QosQceTableRowEditorActionDscpEnable If true, the packet is classified to the DSCP value in ActionDscp. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1004 |
| me1200QosQceTableRowEditorActionDscp The DSCP value used for classification. Valid range is 0-1. | scalar | ME1200-TCME1200Unsigned8 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1005 |
| me1200QosQceTableRowEditorActionPcpDeiEnable If true, the packet is classified to the PCP value in ActionPcp and the
DEI value in ActionDei. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1006 |
| me1200QosQceTableRowEditorActionPcp The PCP value used for classification. Valid range is 0-7. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1007 |
| me1200QosQceTableRowEditorActionDei The DEI value used for classification. Valid range is 0-1. | scalar | ME1200-TCME1200Unsigned8 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1008 |
| me1200QosQceTableRowEditorActionPolicyEnable If true, the packet is classified to the policy number in ActionPolicy. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1009 |
| me1200QosQceTableRowEditorEtype Indicates the packet's 16 bit Ethernet type field. Valid values are:
0(match any), 0x600-0xFFFF but excluding 0x800(IPv4) and
0x86DD(IPv6).This object can only be configured if Fr… | scalar | ME1200-TCME1200EtherType | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.101 |
| me1200QosQceTableRowEditorVlanIdOp Indicates how a packets's VLAN ID is to be compared. | scalar | ME1200ASRType | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.11 |
| me1200QosQceTableRowEditorVlanId The VLAN ID to be compared. If the VlanIdOp object in the same row is
range(2), this object will be the starting VLAN ID of the range. Valid
range is 1-4095. This object can only … | scalar | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.12 |
| me1200QosQceTableRowEditorVlanIdRange The VLAN ID to be compared. If the VlanIdOp object in the same row is
range(2), this object will be the ending VLAN ID of the range. Valid
range is 1-4095. This object can only be… | scalar | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.13 |
| me1200QosQceTableRowEditorPcp The PCP value(s) to be compared. | scalar | ME1200VlanTagPriority | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.14 |
| me1200QosQceTableRowEditorDei The DEI value to be compared. Valid range is 0-1. | scalar | ME1200BitType | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.15 |
| me1200QosQceTableRowEditorInnerVlanTagType Indicates the inner VLAN tag type to match. | scalar | ME1200VlanTagType | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.16 |
| me1200QosQceTableRowEditorInnerVlanIdOp Indicates how a packets's inner VLAN ID is to be compared. | scalar | ME1200ASRType | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.17 |
| me1200QosQceTableRowEditorInnerVlanId The inner VLAN ID to be compared. If the InnerVlanIdOp object in the
same row is range(2), this object will be the starting VLAN ID of the
range. Valid range is 1-4095. This objec… | scalar | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.18 |
| me1200QosQceTableRowEditorInnerVlanIdRange The inner VLAN ID to be compared. If the InnerVlanIdOp object in the
same row is range(2), this object will be the ending VLAN ID of the
range. Valid range is 1-4095. This object … | scalar | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.19 |
| me1200QosQceTableRowEditorNextQceId QCE Id of the next QCE. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.2 |
| me1200QosQceTableRowEditorInnerPcp The inner PCP value(s) to be compared. | scalar | ME1200VlanTagPriority | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.20 |
| me1200QosQceTableRowEditorLlcDsap Indicates the packets's 8 bit LLC DSAP field. The packets LLC DSAP
field is AND-ed with the value of LlcDsapMask and then compared against
the value of this object. If this object… | scalar | ME1200-TCME1200Unsigned8 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.200 |
| me1200QosQceTableRowEditorLlcDsapMask Indicates the 8 bit LLC DSAP mask. Valid values are 0x00 or 0xFF. This
object can only be configured if FrameType is llc(2). | scalar | ME1200-TCME1200Unsigned8 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.201 |
| me1200QosQceTableRowEditorLlcSsap Indicates the packets's 8 bit LLC SSAP field. The packets LLC SSAP
field is AND-ed with the value of LlcSsapMask and then compared against
the value of this object. If this object… | scalar | ME1200-TCME1200Unsigned8 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.202 |
| me1200QosQceTableRowEditorLlcSsapMask Indicates the 8 bit LLC SSAP mask. Valid values are 0x00 or 0xFF. This
object can only be configured if FrameType is llc(2). | scalar | ME1200-TCME1200Unsigned8 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.203 |
| me1200QosQceTableRowEditorLlcControl Indicates the packets's 8 bit LLC Control field. The packets LLC
Control field is AND-ed with the value of LlcControlMask and then
compared against the value of this object. If th… | scalar | ME1200-TCME1200Unsigned8 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.204 |
| me1200QosQceTableRowEditorLlcControlMask Indicates the 8 bit LLC Control mask. Valid values are 0x00 or 0xFF.
This object can only be configured if FrameType is llc(2). | scalar | ME1200-TCME1200Unsigned8 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.205 |
| me1200QosQceTableRowEditorInnerDei The inner DEI value to be compared. Valid range is 0-1. | scalar | ME1200BitType | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.21 |
| me1200QosQceTableRowEditorSnapPid Indicates the packet's 16 bit SNAP PID field. The packets SNAP PID
field is AND-ed with the value of SnapPidMask and then compared against
the value of this object. If this object… | scalar | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.302 |
| me1200QosQceTableRowEditorSnapPidMask Indicates the 16 bit SNAP PID mask. Valid values are 0x0000 or 0xFFFF.
This object can only be configured if FrameType is snap(3). | scalar | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.303 |
| me1200QosQceTableRowEditorPortList List of ports that are member of this QCE. | scalar | ME1200-TCME1200PortList | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.4 |
| me1200QosQceTableRowEditorIpv4Fragment Indicates how an IPv4 fragment bit is to be compared. This object can
only be configured if FrameType is ipv4(4). | scalar | ME1200BitType | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.400 |
| me1200QosQceTableRowEditorIpv4DscpOp Indicates how an IPv4 DSCP field is to be compared. This object can
only be configured if FrameType is ipv4(4). | scalar | ME1200ASRType | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.401 |
| me1200QosQceTableRowEditorIpv4Dscp The DSCP value to be compared. If the Ipv4DscpOp object in the same row
is range(2), this object will be the starting DSCP value of the range.
Valid range is 0-63. This object can… | scalar | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.402 |
| me1200QosQceTableRowEditorIpv4DscpRange The DSCP value to be compared. If the Ipv4DscpOp object in the same row
is range(2), this object will be the ending DSCP value of the range.
Valid range is 0-63. This object can o… | scalar | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.403 |
| me1200QosQceTableRowEditorIpv4Protocol The protocol number field in the IPv4 header used to indicate a higher
layer protocol. The packets protocol number field is AND-ed with the
value of Ipv4ProtocolMask and then comp… | scalar | ME1200-TCME1200Unsigned8 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.404 |
| me1200QosQceTableRowEditorIpv4ProtocolMask The specified IPv4 protocol number mask. Valid values are 0 or 255.
This object can only be configured if FrameType is ipv4(4). | scalar | ME1200-TCME1200Unsigned8 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.405 |
| me1200QosQceTableRowEditorIpv4SrcIp The specified IPv4 source address. The packets source address is AND-ed
with the value of Ipv4SrcIpMask and then compared with the value of
this object. If Ipv4SrcIP and Ipv4SrcIp… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.406 |
| me1200QosQceTableRowEditorIpv4SrcIpMask The specified IPv4 source address mask. This object can only be
configured if FrameType is ipv4(4). | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.407 |
| me1200QosQceTableRowEditorIpv4DestIp The specified IPv4 destination address. The packets destination address
is AND-ed with the value of Ipv4DestIpMask and then compared with the
value of this object. If Ipv4DestIP a… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.408 |
| me1200QosQceTableRowEditorIpv4DestIpMask The specified IPv4 destination address mask. This object can only be
configured if FrameType is ipv4(4). | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.409 |
| me1200QosQceTableRowEditorIpv4SrcPortOp Indicates how a packet's source TCP/UDP port number is to be compared.
This object can only be configured if FrameType is ipv4(4). | scalar | ME1200ASRType | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.410 |
| me1200QosQceTableRowEditorIpv4SrcPort The source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp
object in the same row is range(2), this object will be the starting
port number of the port range. Valid r… | scalar | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.411 |
| me1200QosQceTableRowEditorIpv4SrcPortRange The source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp
object in the same row is range(2), this object will be the ending port
number of the port range. Valid ran… | scalar | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.412 |
| me1200QosQceTableRowEditorIpv4DestPortOp Indicates how a packet's destination TCP/UDP port number is to be
compared. This object can only be configured if FrameType is ipv4(4). | scalar | ME1200ASRType | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.413 |
| me1200QosQceTableRowEditorIpv4DestPort The destination port number of the TCP or UDP protocol. If the
Ipv4DestPortOp object in the same row is range(2), this object will be
the starting port number of the port range. V… | scalar | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.414 |
| me1200QosQceTableRowEditorIpv4DestPortRange The source port number of the TCP or UDP protocol. If the
Ipv4DestPortOp object in the same row is range(2), this object will be
the ending port number of the port range. Valid ra… | scalar | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.415 |
| me1200QosQceTableRowEditorDestMacType Indicates the destination MAC type to match. | scalar | ME1200DestMacType | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.5 |
| me1200QosQceTableRowEditorIpv6DscpOp Indicates how an IPv6 DSCP field is to be compared. This object can
only be configured if FrameType is ipv6(5). | scalar | ME1200ASRType | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.500 |
| me1200QosQceTableRowEditorIpv6Dscp The DSCP value to be compared. If the Ipv6DscpOp object in the same row
is range(2), this object will be the starting DSCP value of the range.
Valid range is 0-63. This object can… | scalar | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.501 |
| me1200QosQceTableRowEditorIpv6DscpRange The DSCP value to be compared. If the Ipv6DscpOp object in the same row
is range(2), this object will be the ending DSCP value of the range.
Valid range is 0-63. This object can o… | scalar | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.502 |
| me1200QosQceTableRowEditorIpv6Protocol The protocol number field in the IPv6 header used to indicate a higher
layer protocol. The packets protocol number field is AND-ed with the
value of Ipv6ProtocolMask and then comp… | scalar | ME1200-TCME1200Unsigned8 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.503 |
| me1200QosQceTableRowEditorIpv6ProtocolMask The specified IPv6 protocol number mask. Valid values are 0 or 255.
This object can only be configured if FrameType is ipv6(5). | scalar | ME1200-TCME1200Unsigned8 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.504 |
| me1200QosQceTableRowEditorIpv6SrcIp The specified IPv6 source address. The packets source address is AND-ed
with the value of Ipv6SrcIpMask and then compared with the value of
this object. If Ipv6SrcIP and Ipv6SrcIp… | scalar | INET-ADDRESS-MIBInetAddressIPv6 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.506 |
| me1200QosQceTableRowEditorIpv6SrcIpMask The specified IPv6 source address mask. Only the least significant 32
bits of this object are used. This object can only be configured if
FrameType is ipv6(5). | scalar | INET-ADDRESS-MIBInetAddressIPv6 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.508 |
| me1200QosQceTableRowEditorIpv6DestIp The specified IPv6 destination address. The packets destination address
is AND-ed with the value of Ipv6DestIpMask and then compared with the
value of this object. If Ipv6DestIP a… | scalar | INET-ADDRESS-MIBInetAddressIPv6 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.510 |
| me1200QosQceTableRowEditorIpv6DestIpMask The specified IPv6 destination address mask. Only the least significant
32 bits of this object are used. This object can only be configured if
FrameType is ipv6(5). | scalar | INET-ADDRESS-MIBInetAddressIPv6 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.512 |
| me1200QosQceTableRowEditorIpv6SrcPortOp Indicates how a packet's source TCP/UDP port number is to be compared.
This object can only be configured if FrameType is ipv6(5). | scalar | ME1200ASRType | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.513 |
| me1200QosQceTableRowEditorIpv6SrcPort The source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp
object in the same row is range(2), this object will be the starting
port number of the port range. Valid r… | scalar | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.514 |
| me1200QosQceTableRowEditorIpv6SrcPortRange The source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp
object in the same row is range(2), this object will be the ending port
number of the port range. Valid ran… | scalar | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.515 |
| me1200QosQceTableRowEditorIpv6DestPortOp Indicates how a packet's destination TCP/UDP port number is to be
compared. This object can only be configured if FrameType is ipv6(5). | scalar | ME1200ASRType | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.516 |
| me1200QosQceTableRowEditorIpv6DestPort The destination port number of the TCP or UDP protocol. If the
Ipv6DestPortOp object in the same row is range(2), this object will be
the starting port number of the port range. V… | scalar | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.517 |
| me1200QosQceTableRowEditorIpv6DestPortRange The source port number of the TCP or UDP protocol. If the
Ipv6DestPortOp object in the same row is range(2), this object will be
the ending port number of the port range. Valid ra… | scalar | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.518 |
| me1200QosQceTableRowEditorDestMac Indicates the 48 bits destination MAC address. The packets destination
address is AND-ed with the value of DestMacMask and then compared
against the value of this object. If this … | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.6 |
| me1200QosQceTableRowEditorDestMacMask Indicates the 48 bits destination MAC address mask.Valid values are
00-00-00-00-00-00 or ff-ff-ff-ff-ff-ff. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.7 |
| me1200QosQceTableRowEditorSrcMac Indicates the 48 bits source MAC address. The packets source address is
AND-ed with the value of SrcMacMask and then compared against the value
of this object. If this object valu… | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.8 |
| me1200QosQceTableRowEditorSrcMacMask Indicates the 48 bits source MAC address mask. Valid values are
00-00-00-00-00-00 or ff-ff-ff-ff-ff-ff. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.9 |