ME1200-QOS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
16
Rows
16
Columns
146

me1200QosWredTable

table
.1.3.6.1.4.1.9.9.815.1.14.1.2.1.2 · 1 row entry · 5 columns
Open in standard view 
This table contains the configuration of WRED for queue 0 through 5
me1200QosWredEntry entry .1.3.6.1.4.1.9.9.815.1.14.1.2.1.2.1
Each row contains the configuration for a specific queue
Indexes
me1200QosWredQueue
Column Syntax OID
me1200QosWredQueue
Queue index.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.2.1.1
me1200QosWredEnable
If true, RED is enabled for this queue
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.2.1.2
me1200QosWredMinimumFillLevel
Controls the lower RED fill level threshold in percent of the whole
queue. If the queue filling level is below this threshold, the drop
probability is zero. Valid range is 0-100
ME1200-TCME1200Percentr/w
Textual Convention: ME1200-TCME1200Percent Unsigned32
Type Constraints:
range: 0..100
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.2.1.3
me1200QosWredMaximum
Controls the upper RED drop probability or fill level threshold for
frames marked with Drop Precedence Level 1 (yellow frames). Valid range
is 1-100
ME1200-TCME1200Percentr/w
Textual Convention: ME1200-TCME1200Percent Unsigned32
Type Constraints:
range: 0..100
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.2.1.4
me1200QosWredMaxSelector
Selects whether 'Maximum' controls 'Maximum Drop Probability' or
'Maximum Fill Level'.
ME1200MaxSelectorr/w
Textual Convention: ME1200MaxSelector Enumeration
Type Values:
0maximumDropProbability
1maximumFillLevel
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.2.1.5

me1200QosDscpTable

table
.1.3.6.1.4.1.9.9.815.1.14.1.2.1.3 · 1 row entry · 8 columns
Open in standard view 
This table has 64 entries, one for each DSCP value
me1200QosDscpEntry entry .1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1
Each row contains the configuration for a specific DSCP
Indexes
me1200QosDscpDscp
Column Syntax OID
me1200QosDscpDscp
DSCP index.
DIFFSERV-DSCP-TCDscp
Textual Convention: DIFFSERV-DSCP-TCDscp Integer32
Type Constraints:
range: 0..63
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.1
me1200QosDscpTrust
If true, this DSCP value is trusted. Packets arriving on interfaces
where 'TrustDscp' is enabled will be classified to the corresponding
CoS and DPL in this table.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.2
me1200QosDscpCos
The CoS value which the DSCP value maps to. Valid range is 0-7.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.3
me1200QosDscpDpl
The DPL (Drop Precedence Level) which the DSCP value maps to. Valid
range is 0-1.
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.4
me1200QosDscpIngressTranslation
The new classified DSCP value which the original DSCP value is replaced
with if 'DscpTranslate' is enabled on the interface
DIFFSERV-DSCP-TCDscpr/w
Textual Convention: DIFFSERV-DSCP-TCDscp Integer32
Type Constraints:
range: 0..63
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.5
me1200QosDscpClassify
If true, then packets received on interfaces where 'DscpClassify' is
set to 'selected' will be classified to a new DSCP value based on the
classified CoS and DPL value configured in the qosCosDscpTable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.6
me1200QosDscpEgressTranslation
The new DSCP value that will be written into the packet at egress if
'DscpRemark' on the interface is set to 'remap' or 'remap-dp'. If
'remap-dp' is set then only packets classified to Dpl 0 will use this
table.
DIFFSERV-DSCP-TCDscpr/w
Textual Convention: DIFFSERV-DSCP-TCDscp Integer32
Type Constraints:
range: 0..63
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.7
me1200QosDscpEgressTranslationDp1
The new DSCP value that will be written into the packet at egress if
'DscpRemark' on the interface is set to 'remap-dp'. Only packets
classified to Dpl 1 will use this table.
DIFFSERV-DSCP-TCDscpr/w
Textual Convention: DIFFSERV-DSCP-TCDscp Integer32
Type Constraints:
range: 0..63
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.8

me1200QosCosToDscpTable

table
.1.3.6.1.4.1.9.9.815.1.14.1.2.1.4 · 1 row entry · 3 columns
Open in standard view 
This table has QOS_CLASS_CNT entries, one for each Cos value
me1200QosCosToDscpEntry entry .1.3.6.1.4.1.9.9.815.1.14.1.2.1.4.1
Each row contains the configuration for a specific Cos
Indexes
me1200QosCosToDscpCos
Column Syntax OID
me1200QosCosToDscpCos
CoS index.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.4.1.1
me1200QosCosToDscpDscp
The DSCP value which the classified CoS value maps to when the
classified DPL is 0.
DIFFSERV-DSCP-TCDscpr/w
Textual Convention: DIFFSERV-DSCP-TCDscp Integer32
Type Constraints:
range: 0..63
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.4.1.2
me1200QosCosToDscpDscpDp1
The DSCP value which the classified CoS value maps to when the
classified DPL is 1.
DIFFSERV-DSCP-TCDscpr/w
Textual Convention: DIFFSERV-DSCP-TCDscp Integer32
Type Constraints:
range: 0..63
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.4.1.3

me1200QosQceTable

table
.1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1 · 1 row entry · 73 columns
Open in standard view 
This table contains the configuration of QCEs. The index is QceId.
me1200QosQceEntry entry .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1
Each row contains the configuration of a single QCE.
Indexes
me1200QosQceQceId
Column Syntax OID
me1200QosQceQceId
QCE Id index.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1
me1200QosQceNextQceId
QCE Id of the next QCE.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.2
me1200QosQcePortList
List of ports that are member of this QCE.
ME1200-TCME1200PortListr/w
Textual Convention: ME1200-TCME1200PortList OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.4
me1200QosQceDestMacType
Indicates the destination MAC type to match.
ME1200DestMacTyper/w
Textual Convention: ME1200DestMacType Enumeration
Type Values:
0any
1unicast
2multicast
3broadcast
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.5
me1200QosQceDestMac
Indicates the 48 bits destination MAC address. The packets destination
address is AND-ed with the value of DestMacMask and then compared
against the value of this object. If this object value and the value of
DestMacMas…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.6
me1200QosQceDestMacMask
Indicates the 48 bits destination MAC address mask.Valid values are
00-00-00-00-00-00 or ff-ff-ff-ff-ff-ff.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.7
me1200QosQceSrcMac
Indicates the 48 bits source MAC address. The packets source address is
AND-ed with the value of SrcMacMask and then compared against the value
of this object. If this object value and the value of SrcMacMask is
00-00-0…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.8
me1200QosQceSrcMacMask
Indicates the 48 bits source MAC address mask. Valid values are
00-00-00-00-00-00 or ff-ff-ff-ff-ff-ff.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.9
me1200QosQceVlanTagType
Indicates the VLAN tag type to match.
ME1200VlanTagTyper/w
Textual Convention: ME1200VlanTagType Enumeration
Type Values:
0any
1untagged
2tagged
3cTagged
4sTagged
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.10
me1200QosQceVlanIdOp
Indicates how a packets's VLAN ID is to be compared.
ME1200ASRTyper/w
Textual Convention: ME1200ASRType Enumeration
Type Values:
0any
1specific
2range
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.11
me1200QosQceVlanId
The VLAN ID to be compared. If the VlanIdOp object in the same row is
range(2), this object will be the starting VLAN ID of the range. Valid
range is 1-4095. This object can only be configured if VlanIdOp is not
any(0).
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.12
me1200QosQceVlanIdRange
The VLAN ID to be compared. If the VlanIdOp object in the same row is
range(2), this object will be the ending VLAN ID of the range. Valid
range is 1-4095. This object can only be configured if VlanIdOp is
range(2).
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.13
me1200QosQcePcp
The PCP value(s) to be compared.
ME1200VlanTagPriorityr/w
Textual Convention: ME1200VlanTagPriority Enumeration
Type Values:
0any
1value0
2value1
3value2
4value3
5value4
6value5
7value6
8value7
9range0to1
10range2to3
11range4to5
12range6to7
13range0to3
14range4to7
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.14
me1200QosQceDei
The DEI value to be compared. Valid range is 0-1.
ME1200BitTyper/w
Textual Convention: ME1200BitType Enumeration
Type Values:
0any
1zero
2one
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.15
me1200QosQceInnerVlanTagType
Indicates the inner VLAN tag type to match.
ME1200VlanTagTyper/w
Textual Convention: ME1200VlanTagType Enumeration
Type Values:
0any
1untagged
2tagged
3cTagged
4sTagged
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.16
me1200QosQceInnerVlanIdOp
Indicates how a packets's inner VLAN ID is to be compared.
ME1200ASRTyper/w
Textual Convention: ME1200ASRType Enumeration
Type Values:
0any
1specific
2range
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.17
me1200QosQceInnerVlanId
The inner VLAN ID to be compared. If the InnerVlanIdOp object in the
same row is range(2), this object will be the starting VLAN ID of the
range. Valid range is 1-4095. This object can only be configured if
InnerVlanIdO…
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.18
me1200QosQceInnerVlanIdRange
The inner VLAN ID to be compared. If the InnerVlanIdOp object in the
same row is range(2), this object will be the ending VLAN ID of the
range. Valid range is 1-4095. This object can only be configured if
InnerVlanIdOp …
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.19
me1200QosQceInnerPcp
The inner PCP value(s) to be compared.
ME1200VlanTagPriorityr/w
Textual Convention: ME1200VlanTagPriority Enumeration
Type Values:
0any
1value0
2value1
3value2
4value3
5value4
6value5
7value6
8value7
9range0to1
10range2to3
11range4to5
12range6to7
13range0to3
14range4to7
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.20
me1200QosQceInnerDei
The inner DEI value to be compared. Valid range is 0-1.
ME1200BitTyper/w
Textual Convention: ME1200BitType Enumeration
Type Values:
0any
1zero
2one
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.21
me1200QosQceFrameType
Indicates the packet's frame type. Modifying the frame type on an
existing QCE will restore the content of all frame type dependent
configuration to default.
ME1200QceFrameTyper/w
Textual Convention: ME1200QceFrameType Enumeration
Type Values:
0any
1etype
2llc
3snap
4ipv4
5ipv6
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.100
me1200QosQceEtype
Indicates the packet's 16 bit Ethernet type field. Valid values are:
0(match any), 0x600-0xFFFF but excluding 0x800(IPv4) and
0x86DD(IPv6).This object can only be configured if FrameType is
etype(1).
ME1200-TCME1200EtherTyper/w
Textual Convention: ME1200-TCME1200EtherType Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.101
me1200QosQceLlcDsap
Indicates the packets's 8 bit LLC DSAP field. The packets LLC DSAP
field is AND-ed with the value of LlcDsapMask and then compared against
the value of this object. If this object value and the value of
LlcDsapMask is 0…
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.200
me1200QosQceLlcDsapMask
Indicates the 8 bit LLC DSAP mask. Valid values are 0x00 or 0xFF. This
object can only be configured if FrameType is llc(2).
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.201
me1200QosQceLlcSsap
Indicates the packets's 8 bit LLC SSAP field. The packets LLC SSAP
field is AND-ed with the value of LlcSsapMask and then compared against
the value of this object. If this object value and the value of
LlcSsapMask is 0…
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.202
me1200QosQceLlcSsapMask
Indicates the 8 bit LLC SSAP mask. Valid values are 0x00 or 0xFF. This
object can only be configured if FrameType is llc(2).
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.203
me1200QosQceLlcControl
Indicates the packets's 8 bit LLC Control field. The packets LLC
Control field is AND-ed with the value of LlcControlMask and then
compared against the value of this object. If this object value and the
value of LlcCont…
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.204
me1200QosQceLlcControlMask
Indicates the 8 bit LLC Control mask. Valid values are 0x00 or 0xFF.
This object can only be configured if FrameType is llc(2).
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.205
me1200QosQceSnapPid
Indicates the packet's 16 bit SNAP PID field. The packets SNAP PID
field is AND-ed with the value of SnapPidMask and then compared against
the value of this object. If this object value and the value of
SnapPidMask is 0…
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.302
me1200QosQceSnapPidMask
Indicates the 16 bit SNAP PID mask. Valid values are 0x0000 or 0xFFFF.
This object can only be configured if FrameType is snap(3).
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.303
me1200QosQceIpv4Fragment
Indicates how an IPv4 fragment bit is to be compared. This object can
only be configured if FrameType is ipv4(4).
ME1200BitTyper/w
Textual Convention: ME1200BitType Enumeration
Type Values:
0any
1zero
2one
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.400
me1200QosQceIpv4DscpOp
Indicates how an IPv4 DSCP field is to be compared. This object can
only be configured if FrameType is ipv4(4).
ME1200ASRTyper/w
Textual Convention: ME1200ASRType Enumeration
Type Values:
0any
1specific
2range
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.401
me1200QosQceIpv4Dscp
The DSCP value to be compared. If the Ipv4DscpOp object in the same row
is range(2), this object will be the starting DSCP value of the range.
Valid range is 0-63. This object can only be configured if FrameType is
ipv4…
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.402
me1200QosQceIpv4DscpRange
The DSCP value to be compared. If the Ipv4DscpOp object in the same row
is range(2), this object will be the ending DSCP value of the range.
Valid range is 0-63. This object can only be configured if FrameType is
ipv4(4…
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.403
me1200QosQceIpv4Protocol
The protocol number field in the IPv4 header used to indicate a higher
layer protocol. The packets protocol number field is AND-ed with the
value of Ipv4ProtocolMask and then compared with the value of this
object. If I…
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.404
me1200QosQceIpv4ProtocolMask
The specified IPv4 protocol number mask. Valid values are 0 or 255.
This object can only be configured if FrameType is ipv4(4).
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.405
me1200QosQceIpv4SrcIp
The specified IPv4 source address. The packets source address is AND-ed
with the value of Ipv4SrcIpMask and then compared with the value of
this object. If Ipv4SrcIP and Ipv4SrcIpMask are 0.0.0.0, this entry
matches any…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.406
me1200QosQceIpv4SrcIpMask
The specified IPv4 source address mask. This object can only be
configured if FrameType is ipv4(4).
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.407
me1200QosQceIpv4DestIp
The specified IPv4 destination address. The packets destination address
is AND-ed with the value of Ipv4DestIpMask and then compared with the
value of this object. If Ipv4DestIP and Ipv4DestIpMask are 0.0.0.0,
this entr…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.408
me1200QosQceIpv4DestIpMask
The specified IPv4 destination address mask. This object can only be
configured if FrameType is ipv4(4).
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.409
me1200QosQceIpv4SrcPortOp
Indicates how a packet's source TCP/UDP port number is to be compared.
This object can only be configured if FrameType is ipv4(4).
ME1200ASRTyper/w
Textual Convention: ME1200ASRType Enumeration
Type Values:
0any
1specific
2range
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.410
me1200QosQceIpv4SrcPort
The source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp
object in the same row is range(2), this object will be the starting
port number of the port range. Valid range is 0-65535. This object can
only be…
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.411
me1200QosQceIpv4SrcPortRange
The source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp
object in the same row is range(2), this object will be the ending port
number of the port range. Valid range is 0-65535. This object can only
be c…
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.412
me1200QosQceIpv4DestPortOp
Indicates how a packet's destination TCP/UDP port number is to be
compared. This object can only be configured if FrameType is ipv4(4).
ME1200ASRTyper/w
Textual Convention: ME1200ASRType Enumeration
Type Values:
0any
1specific
2range
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.413
me1200QosQceIpv4DestPort
The destination port number of the TCP or UDP protocol. If the
Ipv4DestPortOp object in the same row is range(2), this object will be
the starting port number of the port range. Valid range is 0-65535.
This object can o…
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.414
me1200QosQceIpv4DestPortRange
The source port number of the TCP or UDP protocol. If the
Ipv4DestPortOp object in the same row is range(2), this object will be
the ending port number of the port range. Valid range is 0-65535. This
object can only be …
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.415
me1200QosQceIpv6DscpOp
Indicates how an IPv6 DSCP field is to be compared. This object can
only be configured if FrameType is ipv6(5).
ME1200ASRTyper/w
Textual Convention: ME1200ASRType Enumeration
Type Values:
0any
1specific
2range
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.500
me1200QosQceIpv6Dscp
The DSCP value to be compared. If the Ipv6DscpOp object in the same row
is range(2), this object will be the starting DSCP value of the range.
Valid range is 0-63. This object can only be configured if FrameType is
ipv6…
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.501
me1200QosQceIpv6DscpRange
The DSCP value to be compared. If the Ipv6DscpOp object in the same row
is range(2), this object will be the ending DSCP value of the range.
Valid range is 0-63. This object can only be configured if FrameType is
ipv6(5…
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.502
me1200QosQceIpv6Protocol
The protocol number field in the IPv6 header used to indicate a higher
layer protocol. The packets protocol number field is AND-ed with the
value of Ipv6ProtocolMask and then compared with the value of this
object. If I…
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.503
me1200QosQceIpv6ProtocolMask
The specified IPv6 protocol number mask. Valid values are 0 or 255.
This object can only be configured if FrameType is ipv6(5).
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.504
me1200QosQceIpv6SrcIp
The specified IPv6 source address. The packets source address is AND-ed
with the value of Ipv6SrcIpMask and then compared with the value of
this object. If Ipv6SrcIP and Ipv6SrcIpMask are all zeros, this entry
matches a…
INET-ADDRESS-MIBInetAddressIPv6r/w
Textual Convention: INET-ADDRESS-MIBInetAddressIPv6 OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.506
me1200QosQceIpv6SrcIpMask
The specified IPv6 source address mask. Only the least significant 32
bits of this object are used. This object can only be configured if
FrameType is ipv6(5).
INET-ADDRESS-MIBInetAddressIPv6r/w
Textual Convention: INET-ADDRESS-MIBInetAddressIPv6 OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.508
me1200QosQceIpv6DestIp
The specified IPv6 destination address. The packets destination address
is AND-ed with the value of Ipv6DestIpMask and then compared with the
value of this object. If Ipv6DestIP and Ipv6DestIpMask are all zeros,
this en…
INET-ADDRESS-MIBInetAddressIPv6r/w
Textual Convention: INET-ADDRESS-MIBInetAddressIPv6 OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.510
me1200QosQceIpv6DestIpMask
The specified IPv6 destination address mask. Only the least significant
32 bits of this object are used. This object can only be configured if
FrameType is ipv6(5).
INET-ADDRESS-MIBInetAddressIPv6r/w
Textual Convention: INET-ADDRESS-MIBInetAddressIPv6 OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.512
me1200QosQceIpv6SrcPortOp
Indicates how a packet's source TCP/UDP port number is to be compared.
This object can only be configured if FrameType is ipv6(5).
ME1200ASRTyper/w
Textual Convention: ME1200ASRType Enumeration
Type Values:
0any
1specific
2range
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.513
me1200QosQceIpv6SrcPort
The source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp
object in the same row is range(2), this object will be the starting
port number of the port range. Valid range is 0-65535. This object can
only be…
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.514
me1200QosQceIpv6SrcPortRange
The source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp
object in the same row is range(2), this object will be the ending port
number of the port range. Valid range is 0-65535. This object can only
be c…
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.515
me1200QosQceIpv6DestPortOp
Indicates how a packet's destination TCP/UDP port number is to be
compared. This object can only be configured if FrameType is ipv6(5).
ME1200ASRTyper/w
Textual Convention: ME1200ASRType Enumeration
Type Values:
0any
1specific
2range
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.516
me1200QosQceIpv6DestPort
The destination port number of the TCP or UDP protocol. If the
Ipv6DestPortOp object in the same row is range(2), this object will be
the starting port number of the port range. Valid range is 0-65535.
This object can o…
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.517
me1200QosQceIpv6DestPortRange
The source port number of the TCP or UDP protocol. If the
Ipv6DestPortOp object in the same row is range(2), this object will be
the ending port number of the port range. Valid range is 0-65535. This
object can only be …
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.518
me1200QosQceActionCosEnable
If true, the packet is classified to the CoS value in ActionCos.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1000
me1200QosQceActionCos
The CoS value used for classification. Valid range is 0-7.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1001
me1200QosQceActionDplEnable
If true, the packet is classified to the DPL value in ActionDpl.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1002
me1200QosQceActionDpl
The DPL value used for classification. Valid range is 0-1.
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1003
me1200QosQceActionDscpEnable
If true, the packet is classified to the DSCP value in ActionDscp.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1004
me1200QosQceActionDscp
The DSCP value used for classification. Valid range is 0-1.
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1005
me1200QosQceActionPcpDeiEnable
If true, the packet is classified to the PCP value in ActionPcp and the
DEI value in ActionDei.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1006
me1200QosQceActionPcp
The PCP value used for classification. Valid range is 0-7.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1007
me1200QosQceActionDei
The DEI value used for classification. Valid range is 0-1.
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1008
me1200QosQceActionPolicyEnable
If true, the packet is classified to the policy number in ActionPolicy.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1009
me1200QosQceActionPolicy
The policy number used for classification. Valid range is 0-63.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1010
me1200QosQceAction
Action
ME1200-TCME1200RowEditorStater/w
Textual Convention: ME1200-TCME1200RowEditorState Unsigned32
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.10000

me1200QosQcePrecedenceTable

table
.1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.3 · 1 row entry · 2 columns
Open in standard view 
This table contains the precedence of QCEs ordered by their position in
the QCL.
me1200QosQcePrecedenceEntry entry .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.3.1
Each row contains the precedence of a single QCE.
Indexes
me1200QosQcePrecedenceIndex
Column Syntax OID
me1200QosQcePrecedenceIndex
QCE precedence index. Indicates the position in QCL.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.3.1.1
me1200QosQcePrecedenceQceId
QCE Id.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.3.1.2

me1200QosIfConfigTable

table
.1.3.6.1.4.1.9.9.815.1.14.1.2.2.1 · 1 row entry · 16 columns
Open in standard view 
This table provides QoS configuration for QoS manageable interfaces
me1200QosIfConfigEntry entry .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1
Each row contains the configuration for a specific interface
Indexes
me1200QosIfConfigIfIndex
Column Syntax OID
me1200QosIfConfigIfIndex
Logical interface index.
ME1200-TCME1200InterfaceIndex
Textual Convention: ME1200-TCME1200InterfaceIndex Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.1
me1200QosIfConfigCos
The default CoS value a packet is classified to. Valid range is 0-7.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.2
me1200QosIfConfigDpl
The default DPL (Drop Precedence Level) a packet is classified to.
Valid range is 0-1.
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.3
me1200QosIfConfigPcp
The default PCP value a packet is classified to. Valid range is 0-7.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.4
me1200QosIfConfigDei
The default DEI value a packet is classified to. Valid range is 0-1.
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.5
me1200QosIfConfigTrustTag
If true and the packet is VLAN tagged, then the CoS and DPL assigned to
the packet is the PCP and DEI value in the packet mapped to a CoS and
DPL value defined in the qosTagToCosTable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.6
me1200QosIfConfigTrustDscp
If true and the packet type is IPv4 or IPv6 and the packet DSCP value
is trusted in qosDscpTable, then the CoS and DPL assigned to the packet
is the DSCP value in the packet mapped to a CoS and DPL value defined
in the …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.7
me1200QosIfConfigDwrrCount
The number of queues that are running Deficit Weighted Round Robin
scheduling. This value is restricted to 0 or 6.
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.8
me1200QosIfConfigTagRemarkingMode
Selects the tag remarking mode for egress. Valid values are:

'classified' : Remark the tag with the classified values of PCP and
DEI.

'default' : Remark the tag with the configured TagPcp a…
ME1200TagRemarkingModer/w
Textual Convention: ME1200TagRemarkingMode Enumeration
Type Values:
0classified
2default
3mapped
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.9
me1200QosIfConfigTagPcp
The PCP value to put in the packet if TagRemarkingMode is set to
'default'. Valid range is 0-7.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.10
me1200QosIfConfigTagDei
The DEI value to put in the packet if TagRemarkingMode is set to
'default'. Valid range is 0-1.
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.11
me1200QosIfConfigDscpTranslate
If true then the classified DSCP value is the DSCP value in the packed
mapped to a new DSCP value defined in qosDscpTable.IngressTranslation.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.12
me1200QosIfConfigDscpClassify
Selects if and how the classified DSCP is based on the classified CoS
and DPL for IPv4 and IPv6 packets on ingress.

If a packet is selected for being classified to a new DSCP, the
classification in based …
ME1200DscpClassifyr/w
Textual Convention: ME1200DscpClassify Enumeration
Type Values:
0none
1zero
2selected
3all
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.13
me1200QosIfConfigDscpRemark
Selects if and how the classified DSCP is written into the packet at
egress. Valid values are:

'disabled' : Do not write the classified DSCP into the packet.

'rewrite' : Write the classifie…
ME1200DscpRemarkr/w
Textual Convention: ME1200DscpRemark Enumeration
Type Values:
0disabled
1rewrite
2remap
3remapDp
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.14
me1200QosIfConfigQceAddressMode
If false, the QCE classification for this interface is based on source
(SMAC/SIP) addresses. If true, the QCE classification for this
interface is based on destination (DMAC/DIP) addresses. This parameter
is only used w…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.15
me1200QosIfConfigQceKeyType
The key type specifying the key generated for packets received on the
interface. Valid values are:

'normal' : Half key, match outer tag, SIP and SMAC.

'double-tag' : Quarter key, match inne…
ME1200VcapKeyTyper/w
Textual Convention: ME1200VcapKeyType Enumeration
Type Values:
0normal
1doubleTag
2ipAddr
3macIpAddr
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.16

me1200QosIfTagToCosTable

table
.1.3.6.1.4.1.9.9.815.1.14.1.2.2.2 · 1 row entry · 5 columns
Open in standard view 
This table contains the mapping of (interface, PCP, DEI) to (CoS, DPL)
values.The mappings given by this table is used for all tagged packets
received on an interface if and only if that interface has the value of
TrustTag set to 'true'
me1200QosIfTagToCosEntry entry .1.3.6.1.4.1.9.9.815.1.14.1.2.2.2.1
Each row contains the mapping from (interface, PCP, DEI) to (CoS, DPL)
values.
Indexes
me1200QosIfTagToCosIfIndex me1200QosIfTagToCosPcp me1200QosIfTagToCosDei
Column Syntax OID
me1200QosIfTagToCosIfIndex
Logical interface index.
ME1200-TCME1200InterfaceIndex
Textual Convention: ME1200-TCME1200InterfaceIndex Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.2.1.1
me1200QosIfTagToCosPcp
PCP index.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.2.1.2
me1200QosIfTagToCosDei
DEI index.
Integer32
Constraints:
range: 0-1
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.2.1.3
me1200QosIfTagToCosCos
The CoS value which this entry maps to. Valid range is 0-7.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.2.1.4
me1200QosIfTagToCosDpl
The DPL (Drop Precedence Level) value which this entry maps to. Valid
range is 0-1.
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.2.1.5

me1200QosIfCosToTagTable

table
.1.3.6.1.4.1.9.9.815.1.14.1.2.2.3 · 1 row entry · 5 columns
Open in standard view 
This table contains the mapping of (interface, CoS, DPL) to (PCP, DEI)
values.The mappings given by this table is used for packets transmitted
on an interface if and only if that interface has the value of
TagRemarkingMode set to 'mapped'
me1200QosIfCosToTagEntry entry .1.3.6.1.4.1.9.9.815.1.14.1.2.2.3.1
Each row contains the mapping from (interface, CoS, DPL) to (PCP, DEI)
values.
Indexes
me1200QosIfCosToTagIfIndex me1200QosIfCosToTagCos me1200QosIfCosToTagDpl
Column Syntax OID
me1200QosIfCosToTagIfIndex
Logical interface index.
ME1200-TCME1200InterfaceIndex
Textual Convention: ME1200-TCME1200InterfaceIndex Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.3.1.1
me1200QosIfCosToTagCos
CoS index.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.3.1.2
me1200QosIfCosToTagDpl
DPL index.
Integer32
Constraints:
range: 0-3
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.3.1.3
me1200QosIfCosToTagPcp
The PCP value which this entry maps to. Valid range is 0-7.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.3.1.4
me1200QosIfCosToTagDei
The DEI value which this entry maps to. Valid range is 0-1.
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.3.1.5

me1200QosIfPolicerTable

table
.1.3.6.1.4.1.9.9.815.1.14.1.2.2.4 · 1 row entry · 5 columns
Open in standard view 
This table provides policer configuration for an interface
me1200QosIfPolicerEntry entry .1.3.6.1.4.1.9.9.815.1.14.1.2.2.4.1
Each row contains the configuration for a specific policer
Indexes
me1200QosIfPolicerIfIndex
Column Syntax OID
me1200QosIfPolicerIfIndex
Logical interface index.
ME1200-TCME1200InterfaceIndex
Textual Convention: ME1200-TCME1200InterfaceIndex Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.4.1.1
me1200QosIfPolicerEnable
If true, the port policer is enabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.4.1.2
me1200QosIfPolicerFrameRate
If true, the rate is measured in fps instead of kbps.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.4.1.3
me1200QosIfPolicerFlowControl
If true, and flow control is enabled on the interface, then issue flow
control pause frames instead of discarding frames.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.4.1.4
me1200QosIfPolicerCir
Committed Information Rate. Measured in kbps if FrameRate is false and
fps if FrameRate is true. Valid range is 100-3300000.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.4.1.5

me1200QosIfQueuePolicerTable

table
.1.3.6.1.4.1.9.9.815.1.14.1.2.2.5 · 1 row entry · 4 columns
Open in standard view 
This table provides queue policer configuration for interfaces
me1200QosIfQueuePolicerEntry entry .1.3.6.1.4.1.9.9.815.1.14.1.2.2.5.1
Each row contains the configuration for a specific queue policer
Indexes
me1200QosIfQueuePolicerIfIndex me1200QosIfQueuePolicerQueue
Column Syntax OID
me1200QosIfQueuePolicerIfIndex
Logical interface index.
ME1200-TCME1200InterfaceIndex
Textual Convention: ME1200-TCME1200InterfaceIndex Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.5.1.1
me1200QosIfQueuePolicerQueue
Queue index.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.5.1.2
me1200QosIfQueuePolicerEnable
If true, the queue policer is enabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.5.1.3
me1200QosIfQueuePolicerCir
Committed Information Rate. Measured in kbps. Valid range is
100-3300000.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.5.1.6

me1200QosIfShaperTable

table
.1.3.6.1.4.1.9.9.815.1.14.1.2.2.6 · 1 row entry · 3 columns
Open in standard view 
This table provides shaper configuration for an interface
me1200QosIfShaperEntry entry .1.3.6.1.4.1.9.9.815.1.14.1.2.2.6.1
Each row contains the configuration for a specific shaper
Indexes
me1200QosIfShaperIfIndex
Column Syntax OID
me1200QosIfShaperIfIndex
Logical interface index.
ME1200-TCME1200InterfaceIndex
Textual Convention: ME1200-TCME1200InterfaceIndex Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.6.1.1
me1200QosIfShaperEnable
If true, the port shaper is enabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.6.1.2
me1200QosIfShaperCir
Committed Information Rate. Measured in kbps. Valid range is
100-3300000.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.6.1.3

me1200QosIfQueueShaperTable

table
.1.3.6.1.4.1.9.9.815.1.14.1.2.2.7 · 1 row entry · 5 columns
Open in standard view 
This table provides queue shaper configuration for interfaces
me1200QosIfQueueShaperEntry entry .1.3.6.1.4.1.9.9.815.1.14.1.2.2.7.1
Each row contains the configuration for a specific queue shaper
Indexes
me1200QosIfQueueShaperIfIndex me1200QosIfQueueShaperQueue
Column Syntax OID
me1200QosIfQueueShaperIfIndex
Logical interface index.
ME1200-TCME1200InterfaceIndex
Textual Convention: ME1200-TCME1200InterfaceIndex Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.7.1.1
me1200QosIfQueueShaperQueue
Queue index.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.7.1.2
me1200QosIfQueueShaperEnable
If true, the queue shaper is enabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.7.1.3
me1200QosIfQueueShaperExcess
If true, then allow this queue to get a share of the excess bandwidth.
Excess bandwidth is allowed if this shaper is closed and no other
queues with open shapers have frames for transmission.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.7.1.4
me1200QosIfQueueShaperCir
Committed Information Rate. Measured in kbps. Valid range is
100-3300000.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.7.1.5

me1200QosIfSchedulerTable

table
.1.3.6.1.4.1.9.9.815.1.14.1.2.2.8 · 1 row entry · 3 columns
Open in standard view 
This table contains the mapping of (interface, queue) to weight
values.The mappings given by this table is used when an interface has
the value of DwrrCount greater than 0. Read the qosSchedulerStatusTable
in order to get the 'real' weights in percent as used by the hardware
me1200QosIfSchedulerEntry entry .1.3.6.1.4.1.9.9.815.1.14.1.2.2.8.1
Each row contains the scheduler configuration for a specific queue.
Indexes
me1200QosIfSchedulerIfIndex me1200QosIfSchedulerQueue
Column Syntax OID
me1200QosIfSchedulerIfIndex
Logical interface index.
ME1200-TCME1200InterfaceIndex
Textual Convention: ME1200-TCME1200InterfaceIndex Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.8.1.1
me1200QosIfSchedulerQueue
Queue index.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.8.1.2
me1200QosIfSchedulerWeight
The weight for this queue. Valid range is 1-100.
ME1200-TCME1200Percentr/w
Textual Convention: ME1200-TCME1200Percent Unsigned32
Type Constraints:
range: 0..100
 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.8.1.3

me1200QosStatusQceTable

table
.1.3.6.1.4.1.9.9.815.1.14.1.3.1.1 · 1 row entry · 4 columns
Open in standard view 
This table contains the QCE status in the hardware table.
me1200QosStatusQceEntry entry .1.3.6.1.4.1.9.9.815.1.14.1.3.1.1.1
Each row contains the status of a single QCE.
Indexes
me1200QosStatusQceIndex
Column Syntax OID
me1200QosStatusQceIndex
QCE precedence index. Indicates the position in QCL.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.14.1.3.1.1.1.2
me1200QosStatusQceUserId
User Id.
ME1200QceUserType
Textual Convention: ME1200QceUserType Enumeration
Type Values:
0admin
1voiceVlan
 .1.3.6.1.4.1.9.9.815.1.14.1.3.1.1.1.3
me1200QosStatusQceQceId
QCE Id.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.14.1.3.1.1.1.4
me1200QosStatusQceConflict
If true, a resource conflict is detected.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.14.1.3.1.1.1.100

me1200QosStatusIfTable

table
.1.3.6.1.4.1.9.9.815.1.14.1.3.2.1 · 1 row entry · 2 columns
Open in standard view 
This table provides QoS status for QoS manageable interfaces
me1200QosStatusIfEntry entry .1.3.6.1.4.1.9.9.815.1.14.1.3.2.1.1
Each row contains the status for a specific interface
Indexes
me1200QosStatusIfIfIndex
Column Syntax OID
me1200QosStatusIfIfIndex
Logical interface index.
ME1200-TCME1200InterfaceIndex
Textual Convention: ME1200-TCME1200InterfaceIndex Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.815.1.14.1.3.2.1.1.1
me1200QosStatusIfCos
Some subsystems are allowed to modify the default CoS value for an
interface. This object shows the actual default CoS value a packet is
classified to.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.14.1.3.2.1.1.2

me1200QosStatusIfSchedulerTable

table
.1.3.6.1.4.1.9.9.815.1.14.1.3.2.2 · 1 row entry · 3 columns
Open in standard view 
This table contains the mapping of (interface, queue) to weight
values.The mappings given by this table are the 'real' weights in
percent as used by the hardware
me1200QosStatusIfSchedulerEntry entry .1.3.6.1.4.1.9.9.815.1.14.1.3.2.2.1
Each row contains the scheduler status for a specific queue.
Indexes
me1200QosStatusIfSchedulerIfIndex me1200QosStatusIfSchedulerQueue
Column Syntax OID
me1200QosStatusIfSchedulerIfIndex
Logical interface index.
ME1200-TCME1200InterfaceIndex
Textual Convention: ME1200-TCME1200InterfaceIndex Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.815.1.14.1.3.2.2.1.1
me1200QosStatusIfSchedulerQueue
Queue index.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.9.9.815.1.14.1.3.2.2.1.2
me1200QosStatusIfSchedulerWeight
The weight for this queue. Valid range is 1-100.
ME1200-TCME1200Percent
Textual Convention: ME1200-TCME1200Percent Unsigned32
Type Constraints:
range: 0..100
 .1.3.6.1.4.1.9.9.815.1.14.1.3.2.2.1.3