wdmRemoteProtRoleConflict
LUM-WDM-MIB ·
.1.3.6.1.4.1.8708.2.4.2.7.1.1.25
Object
column
LUM-TCFaultStatus
Protection group master/slave conflict.
A: The protection group is resolved, but the two
peers have the same role defined - both master,
or both slave
D: Their respective roles differ
Context
- MIB
- LUM-WDM-MIB
- OID
.1.3.6.1.4.1.8708.2.4.2.7.1.1.25- Type
- column
- Access
- readonly
- Status
- current
- Parent
- wdmRemoteProtEntry
- Table
- wdmRemoteProtTable
- Siblings
- 25
Values & Constraints
Type Values
1 | ok |
2 | alarm |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wdmRemoteProtIndex An arbitrary index assigned to each entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.4.2.7.1.1.1 |
| wdmRemoteProtCommInterface The port number of the communication link for
this protection group | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.4.2.7.1.1.10 |
| wdmRemoteProtLastChangeTime The time the operational state of the protection
group was last changed. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.8708.2.4.2.7.1.1.11 |
| wdmRemoteProtIpAddress The IP-address of the remote node. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.8708.2.4.2.7.1.1.12 |
| wdmRemoteProtIdentifier The identifier (name) of the protection group
that is understod by both the local and the remote
node. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.4.2.7.1.1.13 |
| wdmRemoteProtRole The role of the node in this protection group.
master - the manager should read info from this node.
slave - the manager should read from the other n… | column | Enumeration | .1.3.6.1.4.1.8708.2.4.2.7.1.1.14 |
| wdmRemoteProtAdminStatus The administrative state for the protection
group.
down - The protection group is inactive.
localForced - The local side is forced active.
… | column | Enumeration | .1.3.6.1.4.1.8708.2.4.2.7.1.1.15 |
| wdmRemoteProtRowStatus Manages creation and deletion of conceptual rows.
See also SNMPv2-TC. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.8708.2.4.2.7.1.1.16 |
| wdmRemoteProtActiveSide The operational state for the protection group.
none - no side is active.
local - the local side is active.
remote - the remote side i… | column | Enumeration | .1.3.6.1.4.1.8708.2.4.2.7.1.1.17 |
| wdmRemoteProtLocalStatus The operational state for the local side of the
protection group.
down - this side is out of service.
up - this side is working. | column | Enumeration | .1.3.6.1.4.1.8708.2.4.2.7.1.1.18 |
| wdmRemoteProtRemoteStatus The operational state for the remote side of
the protection group.
down - this side is out of service.
up - this side is working. | column | Enumeration | .1.3.6.1.4.1.8708.2.4.2.7.1.1.19 |
| wdmRemoteProtName The name of the object, for example
'rpg:1:2:1', where the numbers indicate the
subrack, slot and TX port number for the local
interface of the group.
The interface… | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.4.2.7.1.1.2 |
| wdmRemoteProtObjectProperty Property mask. | column | LUM-TCObjectProperty | .1.3.6.1.4.1.8708.2.4.2.7.1.1.20 |
| wdmRemoteProtServiceDegraded Protection service degraded.
A: One of the sides of the protection group has
signal failure or one side is forced active.
D: Both sides of the protec… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.4.2.7.1.1.21 |
| wdmRemoteProtServiceFailure Protection service failure.
A: Both sides of the protection group has
signal failure or the side that is forced
active has signal failure.
D: One of … | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.4.2.7.1.1.22 |
| wdmRemoteProtSetup Procedure to setup the protection group.
- Communication Interface
Select from a list of available interfaces
- Remote IP-address
Select from a l… | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.4.2.7.1.1.23 |
| wdmRemoteProtSetupFailure Protection group setup failure.
A: The defined remote IP-address and/or protection
group identifier can not be resolved with the
peer node.
D: … | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.4.2.7.1.1.24 |
| wdmRemoteProtCommunicationFailure Protection group communication failure
A: There are several underlying criterias for this:
- Loss of signal on the communication link
- Errors on the communic… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.4.2.7.1.1.26 |
| wdmRemoteProtDescr User configurable label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.4.2.7.1.1.3 |
| wdmRemoteProtLocalSubrack The subrack number for this protected
interface. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.4.2.7.1.1.4 |
| wdmRemoteProtLocalSlot The slot number for this protected
interface. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.4.2.7.1.1.5 |
| wdmRemoteProtLocalPort The port number for the TX side of this
protected interface. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.4.2.7.1.1.6 |
| wdmRemoteProtCommSubrack The subrack number of the communication link for
this protection group. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.4.2.7.1.1.7 |
| wdmRemoteProtCommSlot The slot number of the communication link for
this protection group. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.4.2.7.1.1.8 |
| wdmRemoteProtCommPort The port number of the communication link for
this protection group | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.4.2.7.1.1.9 |