roadmGroupRoadmUnlinkChannelCommand
LUM-ROADM-MIB ·
.1.3.6.1.4.1.8708.2.31.2.4.1.1.31
Object
column
LUM-TCCommandString
Specify that a channel shall be removed (disconnected) from this group
Context
- MIB
- LUM-ROADM-MIB
- OID
.1.3.6.1.4.1.8708.2.31.2.4.1.1.31- Type
- column
- Access
- readonly
- Status
- current
- Parent
- roadmGroupRoadmEntry
- Table
- roadmGroupRoadmTable
- Siblings
- 32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| roadmGroupRoadmIndex An arbitrary index assigned to each entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.31.2.4.1.1.1 |
| roadmGroupRoadmAdminStatus The administrative state for the interface.
down - The interface should be inactive.
service - The interface is activated but alarms
are suppressed. … | column | LUM-TCBoardOrInterfaceAdminStatus | .1.3.6.1.4.1.8708.2.31.2.4.1.1.11 |
| roadmGroupRoadmObjectProperty Property mask. | column | LUM-TCObjectProperty | .1.3.6.1.4.1.8708.2.31.2.4.1.1.12 |
| roadmGroupRoadmDataAdminStatus The administrative state for the master/slave add-
drop interfaces.
down - The interface should be inactive.
service - The interface is activated but… | column | LUM-TCBoardOrInterfaceAdminStatus | .1.3.6.1.4.1.8708.2.31.2.4.1.1.14 |
| roadmGroupRoadmDataDropFrequencyMin Lowest added freqency in hundreds of GHz
(0.01 GHz) for the master/slave add-drop
interfaces.
Supported range 19185 ... 19580 (ch9185 .. ch958)
This … | column | LUM-TCLambdaFrequency | .1.3.6.1.4.1.8708.2.31.2.4.1.1.15 |
| roadmGroupRoadmDataDropFrequencyMax Highest added channel in hundreds of GHz
(0.01 GHz)
Supported range 19185 ... 19580 (ch9185 .. ch958)
This attribute can be written via SNMP. | column | LUM-TCLambdaFrequency | .1.3.6.1.4.1.8708.2.31.2.4.1.1.16 |
| roadmGroupRoadmDataDropFrequencyLimitMin When an Allocated Range is defined for the two
add-drop interfaces, it is not possible
to add channels outside the range.
Supported range 19185 ... 19580 (ch9185 ..… | column | LUM-TCLambdaFrequency | .1.3.6.1.4.1.8708.2.31.2.4.1.1.17 |
| roadmGroupRoadmDataDropFrequencyLimitMax When an Allocated Range is defined for the two
add-drop interfaces, it is not possible
to add channels outside the range.
Supported range 19185 ... 19598 (ch9185 ..… | column | LUM-TCLambdaFrequency | .1.3.6.1.4.1.8708.2.31.2.4.1.1.18 |
| roadmGroupRoadmDataMode The drop mode for the master/slave add-drop interface.
express - No wavelengths are dropped.
drop - Up to eight (15 if 50 GHz spacing is used) channe… | column | Enumeration | .1.3.6.1.4.1.8708.2.31.2.4.1.1.19 |
| roadmGroupRoadmName The name of the object, for example
'roadm:1:2:1:1:3:1', where the numbers indicate the
subrack, slot and TX port number for the left and
right add-drop interfaces of the group.
… | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.31.2.4.1.1.2 |
| roadmGroupRoadmDataSpacingMode The spacing mode of the add-drop interfaces.
spacing100GHz: Only 100GHz channels are available
as drop frequencies.
spacing50GHz: Both 50GHz and 100G… | column | Enumeration | .1.3.6.1.4.1.8708.2.31.2.4.1.1.20 |
| roadmGroupRoadmConfigurationCommand Configure the drop frequencies for the master/slave add-
drop interfaces.
Express mode - All the channels will go through the express port
of the drop section (Ext … | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.31.2.4.1.1.21 |
| roadmGroupRoadmLimitConfigurationCommand Configure the Allocated Channel Range for the two
add-drop interfaces.
When an Allocated Range is defined, it is not possible
to add channels outside the range. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.31.2.4.1.1.22 |
| roadmGroupRoadmPasswd Password protecting the Allocated Channel Range.
If passwd is '-' (dash), then the password
controll is disabled. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.31.2.4.1.1.23 |
| roadmGroupRoadmPasswdConfig Change the password protecting the Allocated
Channel Range for the master/slave add-drop
interfaces. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.31.2.4.1.1.24 |
| roadmGroupRoadmDataGuardChannel1 When 50GHz spacing is used, the channel before the
minDropFrequency cannot be used for express traffic.
This channel is considered as a guard channel. | column | LUM-TCLambdaFrequency | .1.3.6.1.4.1.8708.2.31.2.4.1.1.25 |
| roadmGroupRoadmDataGuardChannel2 When 50GHz spacing is used, the channel after the
maxDropFrequency cannot be used for express traffic.
This channel is considered as a guard channel. | column | LUM-TCLambdaFrequency | .1.3.6.1.4.1.8708.2.31.2.4.1.1.26 |
| roadmGroupRoadmNoOfConnectedChannels The number of channels connected to this group | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.31.2.4.1.1.27 |
| roadmGroupRoadmViewChannelList Shows a list of all channels connected to this group
This attribute is only used for presentation. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.31.2.4.1.1.28 |
| roadmGroupRoadmConnectedChannelMask Shows a list of all channels connected to this group
Format:
'<start-freq>:<spacing>:<bit-mask>'
This is the actual storage of the cross-connect i… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.31.2.4.1.1.29 |
| roadmGroupRoadmDescr User configurable label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.31.2.4.1.1.3 |
| roadmGroupRoadmAddChannelCommand Specify that a new channel shall be added
from this group. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.31.2.4.1.1.30 |
| roadmGroupRoadmUnlinkAllChannelsCommand Confirm that all channels shall be removed
(disconnected) from this group | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.31.2.4.1.1.32 |
| roadmGroupRoadmConnectChannelCmd This is a 'write-only' parameter that the
TNM can use to cross-connect a new channel.
When you read the parameter, you will get
an integer value that is incremented… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.31.2.4.1.1.33 |
| roadmGroupRoadmDisconnectChannelCmd This is a 'write-only' parameter that the
TNM can use to disconnect a channel.
When you read the parameter, you will get
an integer value that is incremented each t… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.31.2.4.1.1.34 |
| roadmGroupRoadmAddAllChannelCommand All available channels shall be added
to this group. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.31.2.4.1.1.35 |
| roadmGroupRoadmRightSubrack The subrack number for the right add-drop
interface. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.31.2.4.1.1.4 |
| roadmGroupRoadmRightSlot The slot number for the right add-drop
interface. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.31.2.4.1.1.5 |
| roadmGroupRoadmRightPort The port number for the TX side of the right
add-drop interface. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.31.2.4.1.1.6 |
| roadmGroupRoadmLeftSubrack The subrack number for the left add-drop
interface. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.31.2.4.1.1.7 |
| roadmGroupRoadmLeftSlot The slot number for the left add-drop
interface. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.31.2.4.1.1.8 |
| roadmGroupRoadmLeftPort The port number for the TX side of the left
add-drop interface. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.31.2.4.1.1.9 |