roadmGroupRoadmDataGuardChannel2
LUM-ROADM-MIB ·
.1.3.6.1.4.1.8708.2.31.2.4.1.1.26
Object
column
LUM-TCLambdaFrequency
When 50GHz spacing is used, the channel after the maxDropFrequency cannot be used for express traffic. This channel is considered as a guard channel.
Context
- MIB
- LUM-ROADM-MIB
- OID
.1.3.6.1.4.1.8708.2.31.2.4.1.1.26- Type
- column
- Access
- readonly
- Status
- current
- Parent
- roadmGroupRoadmEntry
- Table
- roadmGroupRoadmTable
- Siblings
- 32
Values & Constraints
Type Values
0 | undefined |
1 | iWdmPonFrequency |
2 | otclg |
130 | b1300 |
150 | b1500 |
850 | w850 |
1270 | w1270 |
1290 | w1290 |
1310 | w1310 |
1330 | w1330 |
1350 | w1350 |
1370 | w1370 |
1390 | w1390 |
1410 | w1410 |
1430 | w1430 |
1450 | w1450 |
1470 | w1470 |
1490 | w1490 |
1510 | w1510 |
1530 | w1530 |
1550 | w1550 |
1570 | w1570 |
1590 | w1590 |
1610 | w1610 |
18710 | ch871 |
18730 | ch873 |
18750 | ch875 |
18770 | ch877 |
18790 | ch879 |
18810 | ch881 |
18830 | ch883 |
18850 | ch885 |
18870 | ch887 |
18890 | ch889 |
18910 | ch891 |
18930 | ch893 |
18950 | ch895 |
18970 | ch897 |
18990 | ch899 |
19010 | ch901 |
19030 | ch903 |
19050 | ch905 |
19070 | ch907 |
19090 | ch909 |
19135 | ch9135 |
19140 | ch914 |
19145 | ch9145 |
19150 | ch915 |
19155 | ch9155 |
19160 | ch916 |
19165 | ch9165 |
19170 | ch917 |
19175 | ch9175 |
19180 | ch918 |
19185 | ch9185 |
19190 | ch919 |
19195 | ch9195 |
19200 | ch920 |
19205 | ch9205 |
19210 | ch921 |
19215 | ch9215 |
19220 | ch922 |
19225 | ch9225 |
19230 | ch923 |
19235 | ch9235 |
19240 | ch924 |
19245 | ch9245 |
19250 | ch925 |
19255 | ch9255 |
19260 | ch926 |
19265 | ch9265 |
19270 | ch927 |
19275 | ch9275 |
19280 | ch928 |
19285 | ch9285 |
19290 | ch929 |
19295 | ch9295 |
19300 | ch930 |
19305 | ch9305 |
19310 | ch931 |
19315 | ch9315 |
19320 | ch932 |
19325 | ch9325 |
19330 | ch933 |
19335 | ch9335 |
19340 | ch934 |
19345 | ch9345 |
19350 | ch935 |
19355 | ch9355 |
19360 | ch936 |
19365 | ch9365 |
19370 | ch937 |
19375 | ch9375 |
19380 | ch938 |
19385 | ch9385 |
19390 | ch939 |
19395 | ch9395 |
19400 | ch940 |
19405 | ch9405 |
19410 | ch941 |
19415 | ch9415 |
19420 | ch942 |
19425 | ch9425 |
19430 | ch943 |
19435 | ch9435 |
19440 | ch944 |
19445 | ch9445 |
19450 | ch945 |
19455 | ch9455 |
19460 | ch946 |
19465 | ch9465 |
19470 | ch947 |
19475 | ch9475 |
19480 | ch948 |
19485 | ch9485 |
19490 | ch949 |
19495 | ch9495 |
19500 | ch950 |
19505 | ch9505 |
19510 | ch951 |
19515 | ch9515 |
19520 | ch952 |
19525 | ch9525 |
19530 | ch953 |
19535 | ch9535 |
19540 | ch954 |
19545 | ch9545 |
19550 | ch955 |
19555 | ch9555 |
19560 | ch956 |
19565 | ch9565 |
19570 | ch957 |
19575 | ch9575 |
19580 | ch958 |
19585 | ch9585 |
19590 | ch959 |
19595 | ch9595 |
19600 | ch960 |
19605 | ch9605 |
19610 | ch961 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| roadmGroupRoadmIndex An arbitrary index assigned to each entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.31.2.4.1.1.1 |
| roadmGroupRoadmAdminStatus The administrative state for the interface.
down - The interface should be inactive.
service - The interface is activated but alarms
are suppressed. … | column | LUM-TCBoardOrInterfaceAdminStatus | .1.3.6.1.4.1.8708.2.31.2.4.1.1.11 |
| roadmGroupRoadmObjectProperty Property mask. | column | LUM-TCObjectProperty | .1.3.6.1.4.1.8708.2.31.2.4.1.1.12 |
| roadmGroupRoadmDataAdminStatus The administrative state for the master/slave add-
drop interfaces.
down - The interface should be inactive.
service - The interface is activated but… | column | LUM-TCBoardOrInterfaceAdminStatus | .1.3.6.1.4.1.8708.2.31.2.4.1.1.14 |
| roadmGroupRoadmDataDropFrequencyMin Lowest added freqency in hundreds of GHz
(0.01 GHz) for the master/slave add-drop
interfaces.
Supported range 19185 ... 19580 (ch9185 .. ch958)
This … | column | LUM-TCLambdaFrequency | .1.3.6.1.4.1.8708.2.31.2.4.1.1.15 |
| roadmGroupRoadmDataDropFrequencyMax Highest added channel in hundreds of GHz
(0.01 GHz)
Supported range 19185 ... 19580 (ch9185 .. ch958)
This attribute can be written via SNMP. | column | LUM-TCLambdaFrequency | .1.3.6.1.4.1.8708.2.31.2.4.1.1.16 |
| roadmGroupRoadmDataDropFrequencyLimitMin When an Allocated Range is defined for the two
add-drop interfaces, it is not possible
to add channels outside the range.
Supported range 19185 ... 19580 (ch9185 ..… | column | LUM-TCLambdaFrequency | .1.3.6.1.4.1.8708.2.31.2.4.1.1.17 |
| roadmGroupRoadmDataDropFrequencyLimitMax When an Allocated Range is defined for the two
add-drop interfaces, it is not possible
to add channels outside the range.
Supported range 19185 ... 19598 (ch9185 ..… | column | LUM-TCLambdaFrequency | .1.3.6.1.4.1.8708.2.31.2.4.1.1.18 |
| roadmGroupRoadmDataMode The drop mode for the master/slave add-drop interface.
express - No wavelengths are dropped.
drop - Up to eight (15 if 50 GHz spacing is used) channe… | column | Enumeration | .1.3.6.1.4.1.8708.2.31.2.4.1.1.19 |
| roadmGroupRoadmName The name of the object, for example
'roadm:1:2:1:1:3:1', where the numbers indicate the
subrack, slot and TX port number for the left and
right add-drop interfaces of the group.
… | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.31.2.4.1.1.2 |
| roadmGroupRoadmDataSpacingMode The spacing mode of the add-drop interfaces.
spacing100GHz: Only 100GHz channels are available
as drop frequencies.
spacing50GHz: Both 50GHz and 100G… | column | Enumeration | .1.3.6.1.4.1.8708.2.31.2.4.1.1.20 |
| roadmGroupRoadmConfigurationCommand Configure the drop frequencies for the master/slave add-
drop interfaces.
Express mode - All the channels will go through the express port
of the drop section (Ext … | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.31.2.4.1.1.21 |
| roadmGroupRoadmLimitConfigurationCommand Configure the Allocated Channel Range for the two
add-drop interfaces.
When an Allocated Range is defined, it is not possible
to add channels outside the range. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.31.2.4.1.1.22 |
| roadmGroupRoadmPasswd Password protecting the Allocated Channel Range.
If passwd is '-' (dash), then the password
controll is disabled. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.31.2.4.1.1.23 |
| roadmGroupRoadmPasswdConfig Change the password protecting the Allocated
Channel Range for the master/slave add-drop
interfaces. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.31.2.4.1.1.24 |
| roadmGroupRoadmDataGuardChannel1 When 50GHz spacing is used, the channel before the
minDropFrequency cannot be used for express traffic.
This channel is considered as a guard channel. | column | LUM-TCLambdaFrequency | .1.3.6.1.4.1.8708.2.31.2.4.1.1.25 |
| roadmGroupRoadmNoOfConnectedChannels The number of channels connected to this group | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.31.2.4.1.1.27 |
| roadmGroupRoadmViewChannelList Shows a list of all channels connected to this group
This attribute is only used for presentation. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.31.2.4.1.1.28 |
| roadmGroupRoadmConnectedChannelMask Shows a list of all channels connected to this group
Format:
'<start-freq>:<spacing>:<bit-mask>'
This is the actual storage of the cross-connect i… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.31.2.4.1.1.29 |
| roadmGroupRoadmDescr User configurable label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.31.2.4.1.1.3 |
| roadmGroupRoadmAddChannelCommand Specify that a new channel shall be added
from this group. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.31.2.4.1.1.30 |
| roadmGroupRoadmUnlinkChannelCommand Specify that a channel shall be removed
(disconnected) from this group | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.31.2.4.1.1.31 |
| roadmGroupRoadmUnlinkAllChannelsCommand Confirm that all channels shall be removed
(disconnected) from this group | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.31.2.4.1.1.32 |
| roadmGroupRoadmConnectChannelCmd This is a 'write-only' parameter that the
TNM can use to cross-connect a new channel.
When you read the parameter, you will get
an integer value that is incremented… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.31.2.4.1.1.33 |
| roadmGroupRoadmDisconnectChannelCmd This is a 'write-only' parameter that the
TNM can use to disconnect a channel.
When you read the parameter, you will get
an integer value that is incremented each t… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.31.2.4.1.1.34 |
| roadmGroupRoadmAddAllChannelCommand All available channels shall be added
to this group. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.31.2.4.1.1.35 |
| roadmGroupRoadmRightSubrack The subrack number for the right add-drop
interface. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.31.2.4.1.1.4 |
| roadmGroupRoadmRightSlot The slot number for the right add-drop
interface. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.31.2.4.1.1.5 |
| roadmGroupRoadmRightPort The port number for the TX side of the right
add-drop interface. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.31.2.4.1.1.6 |
| roadmGroupRoadmLeftSubrack The subrack number for the left add-drop
interface. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.31.2.4.1.1.7 |
| roadmGroupRoadmLeftSlot The slot number for the left add-drop
interface. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.31.2.4.1.1.8 |
| roadmGroupRoadmLeftPort The port number for the TX side of the left
add-drop interface. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.31.2.4.1.1.9 |