pwGenericConfigurationSet
LUM-PW-MIB ·
.1.3.6.1.4.1.8708.2.41.2.2.1.1.18
Object
column
Enumeration
PW configuartion set in hardware
true - Indicates that the configuration is set
false - Indicates that the configuration is not set
Context
- MIB
- LUM-PW-MIB
- OID
.1.3.6.1.4.1.8708.2.41.2.2.1.1.18- Type
- column
- Access
- readonly
- Status
- current
- Parent
- pwGenericEntry
- Table
- pwGenericTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | false |
1 | true |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pwGenericIndex An arbitrary index assigned to each entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.41.2.2.1.1.1 |
| pwGenericOutPackets This value represents the number of frames sent by
this pseudowire since last reset of counters.
Continuous (free running) pseudowire counter.
Only valid for edge pseudowire. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.41.2.2.1.1.10 |
| pwGenericOutBytes This value represents the number of bytes sent by this
pseudowire since last reset of counters.
Continuous (free running) pseudowire counter.
Only valid for edge pseudowire. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.41.2.2.1.1.11 |
| pwGenericResetCont Reset the continuous (free running) pseudowire
counters. After a successful reset the default value
(normal) is restored in this action attribute.
Only valid for edge pseudowire. | column | Enumeration | .1.3.6.1.4.1.8708.2.41.2.2.1.1.12 |
| pwGenericRowStatus Manages creation and deletion of conceptual rows via snmp.
See also SNMPv2-TC.
This object is only valid for creation and deletion of edge pseudowire.
The corresponding MPLS pseud… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.8708.2.41.2.2.1.1.13 |
| pwGenericPwType The type of pseudowire. Edge pseudowire spans a single
segment between two PEs. The pseudowire label is unchanged
between the originating and terminating PEs.
Multi-segment pseudo… | column | Enumeration | .1.3.6.1.4.1.8708.2.41.2.2.1.1.14 |
| pwGenericTrafficClass The entry signifies the Traffic Class set on the traffic
on entering the pseudowire. Setting the traffic class to -1 is not supported. | column | Integer32 | .1.3.6.1.4.1.8708.2.41.2.2.1.1.15 |
| pwGenericReservedBW Bandwidth reserved by the pseudowire.
Default value is 0 and indicates that no bandwidth
has been allocated by the pseudowire. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.41.2.2.1.1.16 |
| pwGenericPwNumber Pseudowire number is used for index calculations
The number is unique and generated by system. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.41.2.2.1.1.17 |
| pwGenericFlowLabel Flow label | column | Enumeration | .1.3.6.1.4.1.8708.2.41.2.2.1.1.19 |
| pwGenericName The management name of the pseudowire, for example
'pw:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the port numbers. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.41.2.2.1.1.2 |
| pwGenericIdentifier Unique identifier used for referencing this object. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.41.2.2.1.1.3 |
| pwGenericInternalReference For internal use only. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.41.2.2.1.1.4 |
| pwGenericDescr User configurable label for describing the pseudowire. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.41.2.2.1.1.5 |
| pwGenericOutboundLabel The pseudowire label used in the outbound direction,
Actual label range is 16-1048575, 0-15 is reserved.
(i.e. towards the PSN)
Only valid for edge pseudowire. | column | LUM-TCMplsLabel | .1.3.6.1.4.1.8708.2.41.2.2.1.1.6 |
| pwGenericInboundLabel The pseudowire label used in the the inbound direction,
Actual label range is 16-1048575, 0-15 is reserved.
(i.e. from the PSN)
Only valid for edge pseudowire. | column | LUM-TCMplsLabel | .1.3.6.1.4.1.8708.2.41.2.2.1.1.7 |
| pwGenericInPackets This value represents the number of frames received
by this pseudowire since last reset of counters.
Continuous (free running) pseudowire counter.
Only valid for edge pseudowire. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.41.2.2.1.1.8 |
| pwGenericInBytes This value represents the number of bytes received by
this pseudowire since last reset of counters.
Continuous (free running) pseudowire counter.
Only valid for edge pseudowire. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.41.2.2.1.1.9 |