otnSmTcmPmTraceIdMMDetectionMode
LUM-OTN-MIB ·
.1.3.6.1.4.1.8708.2.34.2.2.1.1.22
Object
The method to detect a TTI identifier mismatch value.
Context
- MIB
- LUM-OTN-MIB
- OID
.1.3.6.1.4.1.8708.2.34.2.2.1.1.22- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- otnSmTcmPmEntry
- Table
- otnSmTcmPmTable
- Siblings
- 33
Values & Constraints
Type Values
0 | sapi |
1 | dapi |
2 | both |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| otnSmTcmPmIndex An arbitrary index assigned to each entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.34.2.2.1.1.1 |
| otnSmTcmPmAdminStatus The administrative state for the interface.
down - The interface should be inactive.
service - The object is activated but alarms
are suppressed. Int… | column | LUM-TCBoardOrInterfaceAdminStatus | .1.3.6.1.4.1.8708.2.34.2.2.1.1.10 |
| otnSmTcmPmOperStatus The operational state for the interface.
notPresent - The interface is not available.
down - The interface is de-activated or there are
faults preven… | column | LUM-TCBoardOrInterfaceOperStatus | .1.3.6.1.4.1.8708.2.34.2.2.1.1.11 |
| otnSmTcmPmSapiTraceTransmitted The Source Destination Access Point Identifier to be
transmitted from this interface.
Note, it is only possible to enter 15 characters since first
character is adde… | column | OctetString | .1.3.6.1.4.1.8708.2.34.2.2.1.1.12 |
| otnSmTcmPmSapiTraceReceivedByte0 The received Source Access Point Identifier for this interface. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.34.2.2.1.1.13 |
| otnSmTcmPmSapiTraceReceived The received Source Access Point Identifier for this interface. | column | OctetString | .1.3.6.1.4.1.8708.2.34.2.2.1.1.14 |
| otnSmTcmPmSapiTraceExpected SAPI used for matching against the received SAPI.
Note, it is only possible to enter 15 characters since first
character is added automatically according to standar… | column | OctetString | .1.3.6.1.4.1.8708.2.34.2.2.1.1.15 |
| otnSmTcmPmDapiTraceTransmitted The Destination Access Point Identifier to be transmitted from this
interface.
Note, it is only possible to enter 15 characters since first
character is added autom… | column | OctetString | .1.3.6.1.4.1.8708.2.34.2.2.1.1.16 |
| otnSmTcmPmDapiTraceReceivedByte0 The received Destination Access Point Identifier for this interface. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.34.2.2.1.1.17 |
| otnSmTcmPmDapiTraceReceived The received Destination Access Point Identifier for this interface. | column | OctetString | .1.3.6.1.4.1.8708.2.34.2.2.1.1.18 |
| otnSmTcmPmDapiTraceExpected DAPI used for matching against the received DAPI.
Note, it is only possible to enter 15 characters since first
character is added automatically according to standar… | column | OctetString | .1.3.6.1.4.1.8708.2.34.2.2.1.1.19 |
| otnSmTcmPmName The name of the object, for example
'sm:1:2:1-2', where the numbers indicate the
subrack, slot and port numbers. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.34.2.2.1.1.2 |
| otnSmTcmPmOpSpecificTraceTransmitted The operator specific trace identifier to be transmitted
from this interface.
Set to empty string for default value.
<IP address>:<subrack>:<slot>:… | column | OctetString | .1.3.6.1.4.1.8708.2.34.2.2.1.1.20 |
| otnSmTcmPmOpSpecificTraceReceived The received operator specific trace identifier for this
interface. | column | OctetString | .1.3.6.1.4.1.8708.2.34.2.2.1.1.21 |
| otnSmTcmPmTraceAlarmMode Controls if the trace identifier mismatch alarm
should be raised. If trace alarm mode is enabled, BDI is sent
in backward direction if received trace and expected trace
differs.
… | column | Enumeration | .1.3.6.1.4.1.8708.2.34.2.2.1.1.23 |
| otnSmTcmPmObjectProperty Property mask. | column | LUM-TCObjectProperty | .1.3.6.1.4.1.8708.2.34.2.2.1.1.24 |
| otnSmTcmPmTraceMismatch Indicates if the expected SM/PM/TCMtrace identifier (SAPI+DAPI)
differs from the received trace identifier.
A: The received trace identifier differs from
the expect… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.34.2.2.1.1.25 |
| otnSmTcmPmBackwardDefectIndication Indicates if backward defect indication (BDI) alarm
exists or not.
A: BDI is active.
D: BDI is inactive. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.34.2.2.1.1.26 |
| otnSmTcmPmAlarmIndicationSignal Alarm indication signal.
A: An 'all ones' PM/TCM signal is detected.
D: PM/TCM signal recovered. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.34.2.2.1.1.27 |
| otnSmTcmPmOpenConnectionIndication Open connection Indication.
A: A 'open connection' PM/TCM signal is detected.
D: PM/TCM signal recovered. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.34.2.2.1.1.28 |
| otnSmTcmPmClientMaintenanceIndication deprecated Client Maintenance Indication.
A: A 'client maintenance' PM signal is detected.
D: PM/TCM signal recovered. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.34.2.2.1.1.29 |
| otnSmTcmPmType The type of object, SM, TCM or PM. | column | LUM-TCOtnMonitorType | .1.3.6.1.4.1.8708.2.34.2.2.1.1.3 |
| otnSmTcmPmLockedDefectIndication Locked Defect Indication.
A: A 'Locked Defect' PM/TCM signal is detected.
D: PM/TCM signal recovered. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.34.2.2.1.1.30 |
| otnSmTcmPmSetTerminatedTcmCommand Command to change which TCM that is terminated. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.34.2.2.1.1.31 |
| otnSmTcmPmNoRemoteTerminatedTcm No terminated TCM.
A: The TCM is not terminated anywhere.
D: The TCM is terminated somewhere. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.34.2.2.1.1.32 |
| otnSmTcmPmIncomingAlignmentError Indicates an incoming frame alignment error.
A: IAE is active
D: IAE is inactive | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.34.2.2.1.1.33 |
| otnSmTcmPmBackwardIncomingAlignmentError Indicates a backward incoming alignment error.
A: BIAE is active
D: BIAE is inactive | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.34.2.2.1.1.34 |
| otnSmTcmPmMonitorConfig MontorConfig tells if monitor is terminated or not. | column | LUM-TCOtnMonitorConfig | .1.3.6.1.4.1.8708.2.34.2.2.1.1.4 |
| otnSmTcmPmTerminatedTcm Tcm that will be terminated in this node. This is none
or tcm1, tcm2, tcm3, tcm4, tcm5, tcm6. If one tcm is selected
the alarms on this tcm will also be used as protection criteri… | column | Enumeration | .1.3.6.1.4.1.8708.2.34.2.2.1.1.5 |
| otnSmTcmPmDescr User configurable label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.34.2.2.1.1.6 |
| otnSmTcmPmSubrack The subrack number for this protected
interface. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.34.2.2.1.1.7 |
| otnSmTcmPmSlot The slot number for this protected
interface. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.34.2.2.1.1.8 |
| otnSmTcmPmTxPort The number of the port where the interface is
located. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.34.2.2.1.1.9 |