otnSmTcmPmTraceAlarmMode

LUM-OTN-MIB · .1.3.6.1.4.1.8708.2.34.2.2.1.1.23
MIB view Table view

Object

column r/w Enumeration 
Controls if the trace identifier mismatch alarm
should be raised. If trace alarm mode is enabled, BDI is sent
in backward direction if received trace and expected trace
differs.
              
disabled - The alarm is disabled.
              
enabled - The alarm is raised if expected trace
identifier differs from the received trace
identifier.

Context

MIB
LUM-OTN-MIB
OID
.1.3.6.1.4.1.8708.2.34.2.2.1.1.23
Type
column
Access
readwrite
Status
current
Parent
otnSmTcmPmEntry
Table
otnSmTcmPmTable
Siblings
33

Syntax

Enumeration

Values & Constraints

Enumerated Values
1disabled
2enabled

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
otnSmTcmPmIndex
An arbitrary index assigned to each entry.
columnUnsigned32.1.3.6.1.4.1.8708.2.34.2.2.1.1.1
otnSmTcmPmAdminStatus
The administrative state for the interface. down - The interface should be inactive. service - The object is activated but alarms are suppressed. Int…
columnLUM-TCBoardOrInterfaceAdminStatus.1.3.6.1.4.1.8708.2.34.2.2.1.1.10
otnSmTcmPmOperStatus
The operational state for the interface. notPresent - The interface is not available. down - The interface is de-activated or there are faults preven…
columnLUM-TCBoardOrInterfaceOperStatus.1.3.6.1.4.1.8708.2.34.2.2.1.1.11
otnSmTcmPmSapiTraceTransmitted
The Source Destination Access Point Identifier to be transmitted from this interface. Note, it is only possible to enter 15 characters since first character is adde…
columnOctetString.1.3.6.1.4.1.8708.2.34.2.2.1.1.12
otnSmTcmPmSapiTraceReceivedByte0
The received Source Access Point Identifier for this interface.
columnUnsigned32.1.3.6.1.4.1.8708.2.34.2.2.1.1.13
otnSmTcmPmSapiTraceReceived
The received Source Access Point Identifier for this interface.
columnOctetString.1.3.6.1.4.1.8708.2.34.2.2.1.1.14
otnSmTcmPmSapiTraceExpected
SAPI used for matching against the received SAPI. Note, it is only possible to enter 15 characters since first character is added automatically according to standar…
columnOctetString.1.3.6.1.4.1.8708.2.34.2.2.1.1.15
otnSmTcmPmDapiTraceTransmitted
The Destination Access Point Identifier to be transmitted from this interface. Note, it is only possible to enter 15 characters since first character is added autom…
columnOctetString.1.3.6.1.4.1.8708.2.34.2.2.1.1.16
otnSmTcmPmDapiTraceReceivedByte0
The received Destination Access Point Identifier for this interface.
columnUnsigned32.1.3.6.1.4.1.8708.2.34.2.2.1.1.17
otnSmTcmPmDapiTraceReceived
The received Destination Access Point Identifier for this interface.
columnOctetString.1.3.6.1.4.1.8708.2.34.2.2.1.1.18
otnSmTcmPmDapiTraceExpected
DAPI used for matching against the received DAPI. Note, it is only possible to enter 15 characters since first character is added automatically according to standar…
columnOctetString.1.3.6.1.4.1.8708.2.34.2.2.1.1.19
otnSmTcmPmName
The name of the object, for example 'sm:1:2:1-2', where the numbers indicate the subrack, slot and port numbers.
columnLUM-TCMgmtNameString.1.3.6.1.4.1.8708.2.34.2.2.1.1.2
otnSmTcmPmOpSpecificTraceTransmitted
The operator specific trace identifier to be transmitted from this interface. Set to empty string for default value. <IP address>:<subrack>:<slot>:…
columnOctetString.1.3.6.1.4.1.8708.2.34.2.2.1.1.20
otnSmTcmPmOpSpecificTraceReceived
The received operator specific trace identifier for this interface.
columnOctetString.1.3.6.1.4.1.8708.2.34.2.2.1.1.21
otnSmTcmPmTraceIdMMDetectionMode
The method to detect a TTI identifier mismatch value.
columnLUM-TCOtnTIMDetMode.1.3.6.1.4.1.8708.2.34.2.2.1.1.22
otnSmTcmPmObjectProperty
Property mask.
columnLUM-TCObjectProperty.1.3.6.1.4.1.8708.2.34.2.2.1.1.24
otnSmTcmPmTraceMismatch
Indicates if the expected SM/PM/TCMtrace identifier (SAPI+DAPI) differs from the received trace identifier. A: The received trace identifier differs from the expect…
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.34.2.2.1.1.25
otnSmTcmPmBackwardDefectIndication
Indicates if backward defect indication (BDI) alarm exists or not. A: BDI is active. D: BDI is inactive.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.34.2.2.1.1.26
otnSmTcmPmAlarmIndicationSignal
Alarm indication signal. A: An 'all ones' PM/TCM signal is detected. D: PM/TCM signal recovered.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.34.2.2.1.1.27
otnSmTcmPmOpenConnectionIndication
Open connection Indication. A: A 'open connection' PM/TCM signal is detected. D: PM/TCM signal recovered.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.34.2.2.1.1.28
otnSmTcmPmClientMaintenanceIndication deprecated
Client Maintenance Indication. A: A 'client maintenance' PM signal is detected. D: PM/TCM signal recovered.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.34.2.2.1.1.29
otnSmTcmPmType
The type of object, SM, TCM or PM.
columnLUM-TCOtnMonitorType.1.3.6.1.4.1.8708.2.34.2.2.1.1.3
otnSmTcmPmLockedDefectIndication
Locked Defect Indication. A: A 'Locked Defect' PM/TCM signal is detected. D: PM/TCM signal recovered.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.34.2.2.1.1.30
otnSmTcmPmSetTerminatedTcmCommand
Command to change which TCM that is terminated.
columnLUM-TCCommandString.1.3.6.1.4.1.8708.2.34.2.2.1.1.31
otnSmTcmPmNoRemoteTerminatedTcm
No terminated TCM. A: The TCM is not terminated anywhere. D: The TCM is terminated somewhere.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.34.2.2.1.1.32
otnSmTcmPmIncomingAlignmentError
Indicates an incoming frame alignment error. A: IAE is active D: IAE is inactive
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.34.2.2.1.1.33
otnSmTcmPmBackwardIncomingAlignmentError
Indicates a backward incoming alignment error. A: BIAE is active D: BIAE is inactive
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.34.2.2.1.1.34
otnSmTcmPmMonitorConfig
MontorConfig tells if monitor is terminated or not.
columnLUM-TCOtnMonitorConfig.1.3.6.1.4.1.8708.2.34.2.2.1.1.4
otnSmTcmPmTerminatedTcm
Tcm that will be terminated in this node. This is none or tcm1, tcm2, tcm3, tcm4, tcm5, tcm6. If one tcm is selected the alarms on this tcm will also be used as protection criteri…
columnEnumeration.1.3.6.1.4.1.8708.2.34.2.2.1.1.5
otnSmTcmPmDescr
User configurable label.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.34.2.2.1.1.6
otnSmTcmPmSubrack
The subrack number for this protected interface.
columnLUM-TCSubrackNumber.1.3.6.1.4.1.8708.2.34.2.2.1.1.7
otnSmTcmPmSlot
The slot number for this protected interface.
columnLUM-TCSlotNumber.1.3.6.1.4.1.8708.2.34.2.2.1.1.8
otnSmTcmPmTxPort
The number of the port where the interface is located.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.34.2.2.1.1.9