lldpV2RemManAddrSubtype
LUM-LLDP-V2-MIB ·
.1.3.6.1.4.1.8708.2.67.2.4.1.1.14
Object
column
r/w
LumAddressFamilyNumbers
The type of management address identifier encoding used in
the associated 'lldpRemManagmentAddr' object.
It should be noted that only a subset of the possible
address encodings enumerated in AddressFamilyNumbers
are appropriate for use as a LLDP management
address, either because some are just not apliccable or
because the maximum size of a LldpV2ManAddress octet string
would prevent the use of some address identifier encodings.
Context
- MIB
- LUM-LLDP-V2-MIB
- OID
.1.3.6.1.4.1.8708.2.67.2.4.1.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- lldpV2RemEntry
- Table
- lldpV2RemTable
- Siblings
- 33
Syntax
LumAddressFamilyNumbers
- Source
- LumAddressFamilyNumbers
- Base type
Enumeration
Values & Constraints
Type Values
0 | other |
1 | ipV4 |
2 | ipV6 |
3 | nsap |
4 | hdlc |
5 | bbn1822 |
6 | all802 |
7 | e163 |
8 | e164 |
9 | f69 |
10 | x121 |
11 | ipx |
12 | appleTalk |
13 | decnetIV |
14 | banyanVines |
15 | e164withNsap |
16 | dns |
17 | distinguishedName |
18 | asNumber |
19 | xtpOverIpv4 |
20 | xtpOverIpv6 |
21 | xtpNativeModeXTP |
22 | fibreChannelWWPN |
23 | fibreChannelWWNN |
24 | gwid |
65535 | reserved |
2147483646 | notAvailable |
2147483647 | notApplicable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lldpV2RemIndex An arbitrary index assigned to each entry.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It … | column | Unsigned32 | .1.3.6.1.4.1.8708.2.67.2.4.1.1.1 |
| lldpV2RemSysName The string value used to identify the system name of the
remote system. | column | OctetString | .1.3.6.1.4.1.8708.2.67.2.4.1.1.10 |
| lldpV2RemSysDesc The string value used to identify the system description
of the remote system. | column | OctetString | .1.3.6.1.4.1.8708.2.67.2.4.1.1.11 |
| lldpV2RemSysCapEnabled The capabilities that are enabled on the remote system.
The original TLV is a bit mask and is decoded as follows.
(O) Other (bit 0),
(RE) Repeater (bit 1),
(B) Bridge (bit 2),
(W)… | column | OctetString | .1.3.6.1.4.1.8708.2.67.2.4.1.1.12 |
| lldpV2RemSysCapSupported The capabilities that are supported on the remote system.
The original TLV is a bit mask and is decoded as follows.
(O) Other (bit 0),
(RE) Repeater (bit 1),
(B) Bridge (bit 2),
(… | column | OctetString | .1.3.6.1.4.1.8708.2.67.2.4.1.1.13 |
| lldpV2RemManAddr The string value used to identify the management address
component associated with the remote system. The purpose
of this address is to contact the management entity. | column | LldpV2ManAddress | .1.3.6.1.4.1.8708.2.67.2.4.1.1.15 |
| lldpV2RemManAddrIfSubtype The string value used to identify the management address
component associated with the remote system. The purpose
of this address is to contact the management entity. | column | LldpV2ManAddrIfSubtype | .1.3.6.1.4.1.8708.2.67.2.4.1.1.16 |
| lldpV2RemManAddrIfId The integer value used to identify the interface number
regarding the management address component associated with
the remote system. The value depends upon the value of the
lldpV… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.67.2.4.1.1.17 |
| lldpV2RemManAddrOID The decoded OID value used to identify the type of hardware component
or protocol entity associated with the management address
advertised by the remote system agent. | column | OctetString | .1.3.6.1.4.1.8708.2.67.2.4.1.1.18 |
| lldpV2RemTooManyNeighbors Indicates that there are too many neighbors
as determined by the variable tooManyNeighbors. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8708.2.67.2.4.1.1.19 |
| lldpV2RemName The management name of the LLDP Remote entry.
for example 'neighbor:1:2:1-2' (neighbor:[subrack]:[slot][if]:[tx-rx]) | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.67.2.4.1.1.2 |
| lldpV2RemMtuSize Indicates the remote side MTU size. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.67.2.4.1.1.20 |
| lldpV2RemLagId Indicates the remote side lag Id. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.67.2.4.1.1.21 |
| lldpV2RemLagisAggCapable Indicates if the remote side is capable of aggregation. | column | LUM-TCTruthValueWithNA | .1.3.6.1.4.1.8708.2.67.2.4.1.1.22 |
| lldpV2RemLagisAggregated Indicates if the remote side is aggregated. | column | LUM-TCTruthValueWithNA | .1.3.6.1.4.1.8708.2.67.2.4.1.1.23 |
| lldpV2RemUpTime Time since entry was first added (seconds). | column | Unsigned32 | .1.3.6.1.4.1.8708.2.67.2.4.1.1.24 |
| lldpV2RemTimeout Indicates the remote side timeout (seconds). | column | Unsigned32 | .1.3.6.1.4.1.8708.2.67.2.4.1.1.25 |
| lldpV2RemTTL Indicates the remote side TTL TLV (seconds). | column | Unsigned32 | .1.3.6.1.4.1.8708.2.67.2.4.1.1.26 |
| lldpV2RemSubrack The number of the subrack where the local interface
is located. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.67.2.4.1.1.27 |
| lldpV2RemSlot The number of the slot where the local interface is
located. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.67.2.4.1.1.28 |
| lldpV2RemTxPort The TX-port of the local interface. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.67.2.4.1.1.29 |
| lldpV2RemLocalIfIndex The interface index value used to identify the port associated with this entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.67.2.4.1.1.3 |
| lldpV2RemRxPort The RX-port of the local interface. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.67.2.4.1.1.30 |
| lldpV2RemIdx Internal object reference | column | Integer32 | .1.3.6.1.4.1.8708.2.67.2.4.1.1.31 |
| lldpV2RemIfNo The local physical interface number of the actual multi-connector port. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.67.2.4.1.1.32 |
| lldpV2RemUpPortId Internal port reference for traffic unit. | column | Integer32 | .1.3.6.1.4.1.8708.2.67.2.4.1.1.33 |
| lldpV2RemAgentId Reference to AgentId. | column | Integer32 | .1.3.6.1.4.1.8708.2.67.2.4.1.1.34 |
| lldpV2RemSourceMACAddress The source mac address of received LLDP frame. | column | OctetString | .1.3.6.1.4.1.8708.2.67.2.4.1.1.4 |
| lldpV2RemChassisIdSubtype The type of encoding used to identify the chassis associated
with the remote system. | column | LldpV2ChassisIdSubtype | .1.3.6.1.4.1.8708.2.67.2.4.1.1.5 |
| lldpV2RemChassisId The string value used to identify the chassis component
associated with the remote system. | column | LldpV2ChassisId | .1.3.6.1.4.1.8708.2.67.2.4.1.1.6 |
| lldpV2RemPortIdSubtype The type of port identifier encoding used in the associated
'lldpRemPortId' object. | column | LldpV2PortIdSubtype | .1.3.6.1.4.1.8708.2.67.2.4.1.1.7 |
| lldpV2RemPortId The string value used to identify the port component
associated with the remote system. | column | LldpV2PortId | .1.3.6.1.4.1.8708.2.67.2.4.1.1.8 |
| lldpV2RemPortDesc The string value used to identify the description of
the given port associated with the remote system. | column | OctetString | .1.3.6.1.4.1.8708.2.67.2.4.1.1.9 |