lldpV2RemManAddrIfSubtype

LUM-LLDP-V2-MIB · .1.3.6.1.4.1.8708.2.67.2.4.1.1.16
MIB view Table view

Object

column r/w LldpV2ManAddrIfSubtype 
The string value used to identify the management address
component associated with the remote system. The purpose
of this address is to contact the management entity.

Context

MIB
LUM-LLDP-V2-MIB
OID
.1.3.6.1.4.1.8708.2.67.2.4.1.1.16
Type
column
Access
readwrite
Status
current
Parent
lldpV2RemEntry
Table
lldpV2RemTable
Siblings
33

Syntax

LldpV2ManAddrIfSubtype
Source
LldpV2ManAddrIfSubtype
Base type
Enumeration

Values & Constraints

Type Values
1unknown
2ifIndex
3systemPortNumber
2147483646notAvailable
2147483647notApplicable

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
lldpV2RemIndex
An arbitrary index assigned to each entry. An agent is encouraged to assign monotonically increasing index values to new entries, starting with one, after each reboot. It …
columnUnsigned32.1.3.6.1.4.1.8708.2.67.2.4.1.1.1
lldpV2RemSysName
The string value used to identify the system name of the remote system.
columnOctetString.1.3.6.1.4.1.8708.2.67.2.4.1.1.10
lldpV2RemSysDesc
The string value used to identify the system description of the remote system.
columnOctetString.1.3.6.1.4.1.8708.2.67.2.4.1.1.11
lldpV2RemSysCapEnabled
The capabilities that are enabled on the remote system. The original TLV is a bit mask and is decoded as follows. (O) Other (bit 0), (RE) Repeater (bit 1), (B) Bridge (bit 2), (W)…
columnOctetString.1.3.6.1.4.1.8708.2.67.2.4.1.1.12
lldpV2RemSysCapSupported
The capabilities that are supported on the remote system. The original TLV is a bit mask and is decoded as follows. (O) Other (bit 0), (RE) Repeater (bit 1), (B) Bridge (bit 2), (…
columnOctetString.1.3.6.1.4.1.8708.2.67.2.4.1.1.13
lldpV2RemManAddrSubtype
The type of management address identifier encoding used in the associated 'lldpRemManagmentAddr' object. It should be noted that only a subset of the possible addre…
columnLumAddressFamilyNumbers.1.3.6.1.4.1.8708.2.67.2.4.1.1.14
lldpV2RemManAddr
The string value used to identify the management address component associated with the remote system. The purpose of this address is to contact the management entity.
columnLldpV2ManAddress.1.3.6.1.4.1.8708.2.67.2.4.1.1.15
lldpV2RemManAddrIfId
The integer value used to identify the interface number regarding the management address component associated with the remote system. The value depends upon the value of the lldpV…
columnUnsigned32.1.3.6.1.4.1.8708.2.67.2.4.1.1.17
lldpV2RemManAddrOID
The decoded OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the remote system agent.
columnOctetString.1.3.6.1.4.1.8708.2.67.2.4.1.1.18
lldpV2RemTooManyNeighbors
Indicates that there are too many neighbors as determined by the variable tooManyNeighbors.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.8708.2.67.2.4.1.1.19
lldpV2RemName
The management name of the LLDP Remote entry. for example 'neighbor:1:2:1-2' (neighbor:[subrack]:[slot][if]:[tx-rx])
columnLUM-TCMgmtNameString.1.3.6.1.4.1.8708.2.67.2.4.1.1.2
lldpV2RemMtuSize
Indicates the remote side MTU size.
columnUnsigned32.1.3.6.1.4.1.8708.2.67.2.4.1.1.20
lldpV2RemLagId
Indicates the remote side lag Id.
columnUnsigned32.1.3.6.1.4.1.8708.2.67.2.4.1.1.21
lldpV2RemLagisAggCapable
Indicates if the remote side is capable of aggregation.
columnLUM-TCTruthValueWithNA.1.3.6.1.4.1.8708.2.67.2.4.1.1.22
lldpV2RemLagisAggregated
Indicates if the remote side is aggregated.
columnLUM-TCTruthValueWithNA.1.3.6.1.4.1.8708.2.67.2.4.1.1.23
lldpV2RemUpTime
Time since entry was first added (seconds).
columnUnsigned32.1.3.6.1.4.1.8708.2.67.2.4.1.1.24
lldpV2RemTimeout
Indicates the remote side timeout (seconds).
columnUnsigned32.1.3.6.1.4.1.8708.2.67.2.4.1.1.25
lldpV2RemTTL
Indicates the remote side TTL TLV (seconds).
columnUnsigned32.1.3.6.1.4.1.8708.2.67.2.4.1.1.26
lldpV2RemSubrack
The number of the subrack where the local interface is located.
columnLUM-TCSubrackNumber.1.3.6.1.4.1.8708.2.67.2.4.1.1.27
lldpV2RemSlot
The number of the slot where the local interface is located.
columnLUM-TCSlotNumber.1.3.6.1.4.1.8708.2.67.2.4.1.1.28
lldpV2RemTxPort
The TX-port of the local interface.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.67.2.4.1.1.29
lldpV2RemLocalIfIndex
The interface index value used to identify the port associated with this entry.
columnUnsigned32.1.3.6.1.4.1.8708.2.67.2.4.1.1.3
lldpV2RemRxPort
The RX-port of the local interface.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.67.2.4.1.1.30
lldpV2RemIdx
Internal object reference
columnInteger32.1.3.6.1.4.1.8708.2.67.2.4.1.1.31
lldpV2RemIfNo
The local physical interface number of the actual multi-connector port.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.67.2.4.1.1.32
lldpV2RemUpPortId
Internal port reference for traffic unit.
columnInteger32.1.3.6.1.4.1.8708.2.67.2.4.1.1.33
lldpV2RemAgentId
Reference to AgentId.
columnInteger32.1.3.6.1.4.1.8708.2.67.2.4.1.1.34
lldpV2RemSourceMACAddress
The source mac address of received LLDP frame.
columnOctetString.1.3.6.1.4.1.8708.2.67.2.4.1.1.4
lldpV2RemChassisIdSubtype
The type of encoding used to identify the chassis associated with the remote system.
columnLldpV2ChassisIdSubtype.1.3.6.1.4.1.8708.2.67.2.4.1.1.5
lldpV2RemChassisId
The string value used to identify the chassis component associated with the remote system.
columnLldpV2ChassisId.1.3.6.1.4.1.8708.2.67.2.4.1.1.6
lldpV2RemPortIdSubtype
The type of port identifier encoding used in the associated 'lldpRemPortId' object.
columnLldpV2PortIdSubtype.1.3.6.1.4.1.8708.2.67.2.4.1.1.7
lldpV2RemPortId
The string value used to identify the port component associated with the remote system.
columnLldpV2PortId.1.3.6.1.4.1.8708.2.67.2.4.1.1.8
lldpV2RemPortDesc
The string value used to identify the description of the given port associated with the remote system.
columnOctetString.1.3.6.1.4.1.8708.2.67.2.4.1.1.9