lmpCcUnderlyingIfIndex
LMP-MIB ·
.1.3.6.1.2.1.10.227.1.10.1.2
Object
If lmpCcIsIf is set to true(1), this object carries the index into the ifTable of the entry that represents the LMP interface over which LMP will transmit its traffic. If this object is set to zero but lmpCcIsIf is set to true(1), the control channel is not currently associated with any underlying interface, and the control channel's operational status must not be up(1); nor should the control channel forward or receive traffic. If lmpCcIsIf is set to false(2), this object should be set to zero and ignored.
Context
- MIB
- LMP-MIB
- OID
.1.3.6.1.2.1.10.227.1.10.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- lmpControlChannelEntry
- Table
- lmpControlChannelTable
- Siblings
- 21
Values & Constraints
Type Constraints
range: 0..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lmpCcId This value represents the local control channel identifier.
The control channel identifier is a non-zero 32-bit number. | column | Unsigned32 | .1.3.6.1.2.1.10.227.1.10.1.1 |
| lmpCcHelloInterval This object specifies the value of the HelloInterval
parameter. The default value for this object should be
set to lmpCcHelloIntervalDefault. | column | LmpInterval | .1.3.6.1.2.1.10.227.1.10.1.10 |
| lmpCcHelloIntervalMin This object specifies the minimum value for the
HelloInterval parameter. The default value for this
object should be set to lmpCcHelloIntervalMinDefault. | column | LmpInterval | .1.3.6.1.2.1.10.227.1.10.1.11 |
| lmpCcHelloIntervalMax This object specifies the maximum value for the
HelloInterval parameter. The default value for this
object should be set to lmpCcHelloIntervalMaxDefault. | column | LmpInterval | .1.3.6.1.2.1.10.227.1.10.1.12 |
| lmpCcHelloIntervalNegotiated Once the control channel is active, this object represents
the negotiated HelloInterval value. | column | LmpInterval | .1.3.6.1.2.1.10.227.1.10.1.13 |
| lmpCcHelloDeadInterval This object specifies the value of the HelloDeadInterval
parameter. The default value for this object should be
set to lmpCcHelloDeadIntervalDefault. | column | LmpInterval | .1.3.6.1.2.1.10.227.1.10.1.14 |
| lmpCcHelloDeadIntervalMin This object specifies the minimum value for the
HelloDeadInterval parameter. The default value for this
object should be set to lmpCcHelloDeadIntervalMinDefault. | column | LmpInterval | .1.3.6.1.2.1.10.227.1.10.1.15 |
| lmpCcHelloDeadIntervalMax This object specifies the maximum value for the
HelloDeadInterval parameter. The default value for this
object should be set to lmpCcHelloIntervalMaxDefault. | column | LmpInterval | .1.3.6.1.2.1.10.227.1.10.1.16 |
| lmpCcHelloDeadIntervalNegotiated Once the control channel is active, this object represents
the negotiated HelloDeadInterval value. | column | LmpInterval | .1.3.6.1.2.1.10.227.1.10.1.17 |
| lmpCcLastChange The value of sysUpTime at the time the control channel entered
its current operational state. If the current state was
entered prior to the last re-initialization of the local
ne… | column | SNMPv2-SMITimeTicks | .1.3.6.1.2.1.10.227.1.10.1.18 |
| lmpCcAdminStatus The desired operational status of this control channel. | column | Enumeration | .1.3.6.1.2.1.10.227.1.10.1.19 |
| lmpCcOperStatus The actual operational status of this control channel. | column | Enumeration | .1.3.6.1.2.1.10.227.1.10.1.20 |
| lmpCcRowStatus This variable is used to create, modify, and/or
delete a row in this table. None of the writable objects
in a row can be changed if the status is active(1).
All read-create objec… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.10.227.1.10.1.21 |
| lmpCcStorageType The storage type for this conceptual row in the
lmpControlChannelTable. Conceptual rows having the value
'permanent' need not allow write-access to any
columnar object in the row. | column | SNMPv2-TCStorageType | .1.3.6.1.2.1.10.227.1.10.1.22 |
| lmpCcIsIf In implementations where the control channels are modeled
as interfaces, the value of this object is true(1), and
this control channel is represented by an interface in
the interf… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.227.1.10.1.3 |
| lmpCcNbrNodeId This is the Node ID of the control channel remote node.
This value either is configured or gets created by the node
when a Config message is received or when an outgoing Config
me… | column | LmpNodeId | .1.3.6.1.2.1.10.227.1.10.1.4 |
| lmpCcRemoteId This value represents the remote control channel identifier
(32-bit number). It is determined during the negotiation
phase. A value of zero means that the remote control channel… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.227.1.10.1.5 |
| lmpCcRemoteAddressType This value represents the remote control channel IP address
type. In point-to-point configuration, this value can be set
to unknown(0). | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.10.227.1.10.1.6 |
| lmpCcRemoteIpAddr This value represents the remote control channel Internet
address for numbered control channel. The type of this
address is determined by lmpCcRemoteAddressType.
The control chan… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.10.227.1.10.1.7 |
| lmpCcSetupRole The role that this node should take during establishment
of this control channel. An active node will initiate
establishment. A passive node will wait for the remote node
to ini… | column | Enumeration | .1.3.6.1.2.1.10.227.1.10.1.8 |
| lmpCcAuthentication This object indicates whether the control channel must use
authentication. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.227.1.10.1.9 |