lmpCcIsIf

LMP-MIB · .1.3.6.1.2.1.10.227.1.10.1.3

Object

column r/w SNMPv2-TCTruthValue

In implementations where the control channels are modeled
as interfaces, the value of this object is true(1), and
this control channel is represented by an interface in
the interfaces group table as indicated by the value of
lmpCcUnderlyingIfIndex.  If control channels are not
modeled as interfaces, the value of this object is
false(2), and there is no corresponding interface for
this control channel in the interfaces group table;
the value of lmpCcUnderlyingIfIndex should be
ignored.

Context

MIB: LMP-MIB
OID: .1.3.6.1.2.1.10.227.1.10.1.3
Type: column
Access: readwrite
Status: current
Parent: lmpControlChannelEntry
Table: lmpControlChannelTable
Siblings: 21

Syntax

SNMPv2-TCTruthValue

Source: SNMPv2-TCTruthValue
Base type: Enumeration

Values & Constraints

Type Values

`1`	true
`2`	false

Related Objects

Sibling Objects

Object	Type	Syntax	OID
lmpCcId This value represents the local control channel identifier. The control channel identifier is a non-zero 32-bit number.	column	Unsigned32	`.1.3.6.1.2.1.10.227.1.10.1.1`
lmpCcHelloInterval This object specifies the value of the HelloInterval parameter. The default value for this object should be set to lmpCcHelloIntervalDefault.	column	LmpInterval	`.1.3.6.1.2.1.10.227.1.10.1.10`
lmpCcHelloIntervalMin This object specifies the minimum value for the HelloInterval parameter. The default value for this object should be set to lmpCcHelloIntervalMinDefault.	column	LmpInterval	`.1.3.6.1.2.1.10.227.1.10.1.11`
lmpCcHelloIntervalMax This object specifies the maximum value for the HelloInterval parameter. The default value for this object should be set to lmpCcHelloIntervalMaxDefault.	column	LmpInterval	`.1.3.6.1.2.1.10.227.1.10.1.12`
lmpCcHelloIntervalNegotiated Once the control channel is active, this object represents the negotiated HelloInterval value.	column	LmpInterval	`.1.3.6.1.2.1.10.227.1.10.1.13`
lmpCcHelloDeadInterval This object specifies the value of the HelloDeadInterval parameter. The default value for this object should be set to lmpCcHelloDeadIntervalDefault.	column	LmpInterval	`.1.3.6.1.2.1.10.227.1.10.1.14`
lmpCcHelloDeadIntervalMin This object specifies the minimum value for the HelloDeadInterval parameter. The default value for this object should be set to lmpCcHelloDeadIntervalMinDefault.	column	LmpInterval	`.1.3.6.1.2.1.10.227.1.10.1.15`
lmpCcHelloDeadIntervalMax This object specifies the maximum value for the HelloDeadInterval parameter. The default value for this object should be set to lmpCcHelloIntervalMaxDefault.	column	LmpInterval	`.1.3.6.1.2.1.10.227.1.10.1.16`
lmpCcHelloDeadIntervalNegotiated Once the control channel is active, this object represents the negotiated HelloDeadInterval value.	column	LmpInterval	`.1.3.6.1.2.1.10.227.1.10.1.17`
lmpCcLastChange The value of sysUpTime at the time the control channel entered its current operational state. If the current state was entered prior to the last re-initialization of the local ne…	column	SNMPv2-SMITimeTicks	`.1.3.6.1.2.1.10.227.1.10.1.18`
lmpCcAdminStatus The desired operational status of this control channel.	column	Enumeration	`.1.3.6.1.2.1.10.227.1.10.1.19`
lmpCcUnderlyingIfIndex If lmpCcIsIf is set to true(1), this object carries the index into the ifTable of the entry that represents the LMP interface over which LMP will transmit its traffic. If this obj…	column	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.2.1.10.227.1.10.1.2`
lmpCcOperStatus The actual operational status of this control channel.	column	Enumeration	`.1.3.6.1.2.1.10.227.1.10.1.20`
lmpCcRowStatus This variable is used to create, modify, and/or delete a row in this table. None of the writable objects in a row can be changed if the status is active(1). All read-create objec…	column	SNMPv2-TCRowStatus	`.1.3.6.1.2.1.10.227.1.10.1.21`
lmpCcStorageType The storage type for this conceptual row in the lmpControlChannelTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar object in the row.	column	SNMPv2-TCStorageType	`.1.3.6.1.2.1.10.227.1.10.1.22`
lmpCcNbrNodeId This is the Node ID of the control channel remote node. This value either is configured or gets created by the node when a Config message is received or when an outgoing Config me…	column	LmpNodeId	`.1.3.6.1.2.1.10.227.1.10.1.4`
lmpCcRemoteId This value represents the remote control channel identifier (32-bit number). It is determined during the negotiation phase. A value of zero means that the remote control channel…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.10.227.1.10.1.5`
lmpCcRemoteAddressType This value represents the remote control channel IP address type. In point-to-point configuration, this value can be set to unknown(0).	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.2.1.10.227.1.10.1.6`
lmpCcRemoteIpAddr This value represents the remote control channel Internet address for numbered control channel. The type of this address is determined by lmpCcRemoteAddressType. The control chan…	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.2.1.10.227.1.10.1.7`
lmpCcSetupRole The role that this node should take during establishment of this control channel. An active node will initiate establishment. A passive node will wait for the remote node to ini…	column	Enumeration	`.1.3.6.1.2.1.10.227.1.10.1.8`
lmpCcAuthentication This object indicates whether the control channel must use authentication.	column	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.10.227.1.10.1.9`