apWgBridgeUpstrmWpaPersonalKey

LINKSYS-WLAN-ACCESS-POINT-MIB · .1.3.6.1.4.1.3955.1000.203.19.2.5
MIB view Table view

Object

scalar r/w OctetString 
Pre-shared key for Wireless Protected Access (WPA) personal.
Only used when security is wpa-personal.  Valid value is an
ASCII string between 8 and 63 characters.

Context

MIB
LINKSYS-WLAN-ACCESS-POINT-MIB
OID
.1.3.6.1.4.1.3955.1000.203.19.2.5
Type
scalar
Access
readwrite
Status
current
Parent
apWgBridgeUpstrmEntry
Siblings
34

Syntax

OctetString

Values & Constraints

Object Constraints
range: 8-63

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
apWgBridgeUpstrmName
Indicates name of interface.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.3955.1000.203.19.2.1
apWgBridgeUpstrmWepKey2
Configure WEP key 2. The number of characters required for each WEP key depends on how user sets 'Key Length' and 'Key Type': - If Key Length is 40 bits and the Key Typ…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.3955.1000.203.19.2.10
apWgBridgeUpstrmWepKey3
Configure WEP key 3. The number of characters required for each WEP key depends on how user sets 'Key Length' and 'Key Type': - If Key Length is 40 bits and the Key Typ…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.3955.1000.203.19.2.11
apWgBridgeUpstrmWepKey4
Configure WEP key 4. The number of characters required for each WEP key depends on how user sets 'Key Length' and 'Key Type': - If Key Length is 40 bits and the Key Typ…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.3955.1000.203.19.2.12
apWgBridgeUpstrmOpenSystemAuth obsolete
Indicates whether Open System authentication is permitted. Only used when security is static-wep.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.3955.1000.203.19.2.13
apWgBridgeUpstrmSharedKeyAuth obsolete
Indicates whether Shared Key authentication is permitted. Only used when security is static-wep.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.3955.1000.203.19.2.14
apWgBridgeUpstrmWpaAllowed
Indicates whether WPA is allowed. apWgBridgeUpstrmWpa2Allowed must be set to 'true' to turn off WPA (false).
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.3955.1000.203.19.2.15
apWgBridgeUpstrmWpa2Allowed
Indicates whether WPA2 is allowed. apWgBridgeUpstrmWpaAllowed must be set to 'true' to turn off WPA2(false).
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.3955.1000.203.19.2.16
apWgBridgeUpstrmVlanID
VLAN ID associated with VAP.
scalarInteger32.1.3.6.1.4.1.3955.1000.203.19.2.17
apWgBridgeUpstrmConnStatus
Conection Status of the Upstream Interface.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.3955.1000.203.19.2.18
apWgBridgeUpstrmRxBytes
Indicates received bytes.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.19.2.19
apWgBridgeUpstrmBSSID
Indicates the Upstream BSSID.
scalarSNMPv2-TCMacAddress.1.3.6.1.4.1.3955.1000.203.19.2.2
apWgBridgeUpstrmRxPackets
Indicates received packets.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.19.2.20
apWgBridgeUpstrmTxBytes
Indicates transmitted bytes.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.19.2.21
apWgBridgeUpstrmTxPackets
Indicates transmitted packets.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.19.2.22
apWgBridgeUpstrmConfigUser
Indicates the user name/identity used for WPA supplicant authentication. ASCII printable characters are allowed, which includes upper and lower case alphabetic letters, numeric d…
scalarOctetString.1.3.6.1.4.1.3955.1000.203.19.2.23
apWgBridgeUpstrmConfigPassword
Configure the password used for WPA supplicant authentication. If apWgBridgeUpstrmConfigEapMethod is set to peap, this value is the user's password. If apWgBridgeUpstrmConfigEap…
scalarOctetString.1.3.6.1.4.1.3955.1000.203.19.2.24
apWgBridgeUpstrmConfigEapMethod
Configure the EAP Method used for WPA supplicant authentication.
scalarEnumeration.1.3.6.1.4.1.3955.1000.203.19.2.25
apWgBridgeUpstrmCertificateFilePresent
Inidicates whether the TLS certificate file is present for use with WPA supplicant authentication.
scalarEnumeration.1.3.6.1.4.1.3955.1000.203.19.2.26
apWgBridgeUpstrmCertificateFileExpirationDate
The expiration date of the TLS certificate
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.3955.1000.203.19.2.27
apWgBridgeUpstrmCertificateTFTPServerAddressType
Type of the IP address as defined in the InetAddress MIB. This is the address type of the TFTP server.
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.3955.1000.203.19.2.28
apWgBridgeUpstrmCertificateTFTPServerAddress
The address of the TFTP Server from which to get the certificate file.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.3955.1000.203.19.2.29
apWgBridgeUpstrmSsid
Indicates the upstream SSID, which must consist of 1 to 32 alphanumeric characters and uniquely identify this upstream SSID.
scalarApSsid.1.3.6.1.4.1.3955.1000.203.19.2.3
apWgBridgeUpstrmCertificateTFTPServerPort
The port on the TFTP Server from which to get the certificate file.
scalarInteger32.1.3.6.1.4.1.3955.1000.203.19.2.30
apWgBridgeUpstrmCertificateUploadDirectory
Directory on the server from which to get the certificate file. This directory name does not contain the filename.
scalarOctetString.1.3.6.1.4.1.3955.1000.203.19.2.31
apWgBridgeUpstrmCertificateUploadFilename
File name on the server of the certificate file.
scalarOctetString.1.3.6.1.4.1.3955.1000.203.19.2.32
apWgBridgeUpstrmCertificateUploadProtocol
The protocol used for uploading the certificate file.
scalarEnumeration.1.3.6.1.4.1.3955.1000.203.19.2.33
apWgBridgeUpstrmCertificateUploadStart
This object initiates the certificate file upload to the AP.
scalarEnumeration.1.3.6.1.4.1.3955.1000.203.19.2.34
apWgBridgeUpstrmCertificateUploadStatus
The upload status of the certificate file to the AP.
scalarEnumeration.1.3.6.1.4.1.3955.1000.203.19.2.35
apWgBridgeUpstrmSecurity
Indicates security to use to connect to the upstream AP.
scalarEnumeration.1.3.6.1.4.1.3955.1000.203.19.2.4
apWgBridgeUpstrmWepKeyAscii
Indicates whether or not the Wired Equivalent Privacy (WEP) Key is in ASCII or HEX.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.3955.1000.203.19.2.6
apWgBridgeUpstrmWepKeyLength
Length of the WEP key. The key length values used by the SNMP do not include the initialization vector in the length. On the web UI, longer key length values may be shown which in…
scalarEnumeration.1.3.6.1.4.1.3955.1000.203.19.2.7
apWgBridgeUpstrmWepDefaultKey
Indicates the WEP key index to use when transmitting. Only used when security is static-wep. Valid value is a number between 1 and 4.
scalarInteger32.1.3.6.1.4.1.3955.1000.203.19.2.8
apWgBridgeUpstrmWepKey1
Configure WEP key 1. The number of characters required for each WEP key depends on how user sets 'Key Length' and 'Key Type': - If Key Length is 40 bits and the Key Typ…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.3955.1000.203.19.2.9