apDhcpAddress3Type
LINKSYS-WLAN-ACCESS-POINT-MIB ·
.1.3.6.1.4.1.3955.1000.203.1.3.17
Object
scalar
INET-ADDRESS-MIBInetAddressType
Type of the IP address as defined in the InetAddress MIB. This value depends on third DHCP server IP Address. Only IPv4 addresses are supported.
Context
- MIB
- LINKSYS-WLAN-ACCESS-POINT-MIB
- OID
.1.3.6.1.4.1.3955.1000.203.1.3.17- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- managedAPConfig
- Siblings
- 24
Syntax
INET-ADDRESS-MIBInetAddressType
- Source
- INET-ADDRESS-MIBInetAddressType
- Base type
Enumeration
Values & Constraints
Type Values
0 | unknown |
1 | ipv4 |
2 | ipv6 |
3 | ipv4z |
4 | ipv6z |
16 | dns |
25 | l2vpn |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| apMode Indicates if the managed AP Admnistrative mode is up or down. | scalar | Enumeration | .1.3.6.1.4.1.3955.1000.203.1.3.1 |
| apSwitchAddress4Type Type of the IP Address as defined in the InetAddress MIB for
managing the Wireless Access Point. This value depends on
switch IP Address 4. Only IPv4 addresses are supported. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.3955.1000.203.1.3.10 |
| apSwitchPassPhrase Authentication passphrase for Wireless Access Point.
Specify passphrase of length zero to clear the object. | scalar | OctetString | .1.3.6.1.4.1.3955.1000.203.1.3.11 |
| apDhcpAddress1 First DHCP server IP address from which to get an IP address
for the Wireless Access Point. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3955.1000.203.1.3.12 |
| apDhcpAddress1Type Type of the IP address as defined in the InetAddress MIB.
This value depends on DHCP server IP Address 1.
Only IPv4 addresses are supported. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.3955.1000.203.1.3.13 |
| apDhcpAddress2 Second DHCP server IP address from which to get an IP address
for the Wireless Access Point. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3955.1000.203.1.3.14 |
| apDhcpAddress2Type Type of the IP address as defined in the InetAddress MIB.
This value depends on DHCP server IP Address 2.
Only IPv4 addresses are supported. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.3955.1000.203.1.3.15 |
| apDhcpAddress3 Third DHCP server IP address from which to get an IP address
for the Wireless Access Point. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3955.1000.203.1.3.16 |
| apDhcpAddress4 Forth DHCP server IP address from which to get an IP address
for the Wireless Access Point. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3955.1000.203.1.3.18 |
| apDhcpAddress4Type Type of the IP address as defined in the InetAddress MIB.
This value depends on fourth DHCP server IP Address.
Only IPv4 addresses are supported. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.3955.1000.203.1.3.19 |
| apState State of the AP as it transitions from standalone to managed.
Once in the managed mode, its cofiguration and stats actions
are performed through a management switch. Once the AP i… | scalar | Enumeration | .1.3.6.1.4.1.3955.1000.203.1.3.2 |
| apBasePort IP port wich is used by AP to communicate with Wireless Switch. | scalar | Integer32 | .1.3.6.1.4.1.3955.1000.203.1.3.20 |
| apCfgBasePort Manually configured IP port wich is used by AP to communicate with Wireless Switch. | scalar | Integer32 | .1.3.6.1.4.1.3955.1000.203.1.3.21 |
| apDhcpBasePort DHCP assigned IP port which is used by the AP to communicate with the Wireless Switch. | scalar | Integer32 | .1.3.6.1.4.1.3955.1000.203.1.3.22 |
| apWdsSatelliteMode WDS managed AP satellite mode. | scalar | Enumeration | .1.3.6.1.4.1.3955.1000.203.1.3.23 |
| apWdsEthernetPortMode WDS managed AP Ethernet port mode. | scalar | Enumeration | .1.3.6.1.4.1.3955.1000.203.1.3.24 |
| apWdsGroupPassword Configure the password used for WDS managed AP group
authentication. ASCII printable characters are allowed,
which includes upper and lower case alphabetic letters,
numeric digit… | scalar | OctetString | .1.3.6.1.4.1.3955.1000.203.1.3.25 |
| apSwitchAddress1 First switch IP Address to manage the Wireless Access Point. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3955.1000.203.1.3.3 |
| apSwitchAddress1Type Type of the IP Address as defined in the InetAddress MIB for
managing the Wireless Access Point. This value depends on
switch IP Address 1. Only IPv4 addresses are supported. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.3955.1000.203.1.3.4 |
| apSwitchAddress2 Second switch IP Address to manage Wireless Access Point. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3955.1000.203.1.3.5 |
| apSwitchAddress2Type Type of the IP Address as defined in the InetAddress MIB for
managing the Wireless Access Point. This value depends on
switch IP Address 2. Only IPv4 addresses are supported. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.3955.1000.203.1.3.6 |
| apSwitchAddress3 Third switch IP Address to manage the Wireless Access Point. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3955.1000.203.1.3.7 |
| apSwitchAddress3Type Type of the IP Address as defined in the InetAddress MIB for
managing the Wireless Access Point. This value depends on
switch IP Address 3. Only IPv4 addresses are supported. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.3955.1000.203.1.3.8 |
| apSwitchAddress4 Forth switch IP Address to manage the Wireless Access Point. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3955.1000.203.1.3.9 |