lgpSrcDevPowerStatus
LIEBERT-GP-SRC-MIB ·
.1.3.6.1.4.1.476.1.42.3.10.1.1.9
Object
column
r/w
Enumeration
The value of this object specifies the power status of SRC device. Power status cannot be configured by an operator. The value of this object is set to off(0) if the SRC device is powered off. The value of this object is set to on(1) if the SRC device is powered on. The value of this object will be one of the valid power status: off(0) or on(1) if lgpSrcDevState is enabled(1). The value of this object will be set to unknown(2147483647) if the value of lgpSrcDevState object is set to one of the following values: standbyOffline(2), unavailableOffline(3) or absent(4).
Context
- MIB
- LIEBERT-GP-SRC-MIB
- OID
.1.3.6.1.4.1.476.1.42.3.10.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- lgpSrcEntry
- Table
- lgpSrcTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | off |
1 | on |
2147483647 | unknown |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lgpSrcDevId This value must remain constant between agent initializations.
This Device ID is used as an index of the table
'lgpSrcTable'. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.476.1.42.3.10.1.1.1 |
| lgpSrcDevOperatingMode The present operating mode of the SRC device. This object will be
one of the valid operating mode: cooling(0), dehumidify(1), fan(2),
ai(3) or heating(4) if the value of lgpSrcDe… | column | Enumeration | .1.3.6.1.4.1.476.1.42.3.10.1.1.10 |
| lgpSrcDevTemperatureHighThresholdDegF The high temperature notification threshold. This is the maximum
value of 'lgpSrcDevTemperatureDegF' before the agent sends a
notification. The value of this object is only vail… | column | degrees Fahrenheit Enumeration | .1.3.6.1.4.1.476.1.42.3.10.1.1.11 |
| lgpSrcDevTemperatureLowThresholdDegF The low temperature notification threshold. This is the minimum
value of 'lgpSrcDevTemperatureDegF' before the agent sends a
notification. The value of this object is only vaild… | column | degrees Fahrenheit Enumeration | .1.3.6.1.4.1.476.1.42.3.10.1.1.12 |
| lgpSrcDevTemperatureHighThresholdDegC The high temperature notification threshold. This is the maximum
value of 'lgpSrcDevTemperatureDegC' before the agent sends a
notification. The value of this object is only vail… | column | degrees Celsius Enumeration | .1.3.6.1.4.1.476.1.42.3.10.1.1.13 |
| lgpSrcDevTemperatureLowThresholdDegC The low temperature notification threshold. This is the minimum
value of 'lgpSrcDevTemperatureDegC' before the agent sends a
notification. The value of this object is only vaild… | column | degrees Celsius Enumeration | .1.3.6.1.4.1.476.1.42.3.10.1.1.14 |
| lgpSrcDevAddress This value must remain constant between agent initializations.
This Device Address is used as an index of the table
'lgpSrcTable'. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.476.1.42.3.10.1.1.2 |
| lgpSrcDevState Indicates the current state of SRC device. The value of this
object is set to enabled(1) if the SRC device has been enabled.
The value of this object is set to standbyOffline(2) … | column | Enumeration | .1.3.6.1.4.1.476.1.42.3.10.1.1.3 |
| lgpSrcDevTemperatureDegF The measured temperature value in Fahrenheit. The value of this
object is only vaild if the lgpSrcDevState object is set to
enabled(1). The value of this object will be set to
u… | column | Enumeration | .1.3.6.1.4.1.476.1.42.3.10.1.1.4 |
| lgpSrcDevTemperatureSetpointDegF The temperature setting in Fahrenheit for SRC. This setting may
or may not be the setting used from control. Some systems have the
capability to dynamically change the control s… | column | Enumeration | .1.3.6.1.4.1.476.1.42.3.10.1.1.5 |
| lgpSrcDevTemperatureDegC The measured temperature value in Celsius. The value of this
object is only vaild if the lgpSrcDevState object is set to
enabled(1). The value of this object will be set to
unkn… | column | Enumeration | .1.3.6.1.4.1.476.1.42.3.10.1.1.6 |
| lgpSrcDevTemperatureSetpointDegC The temperature setting in Celsius for SRC. This setting may or
may not be the setting used from control. Some systems have the
capability to dynamically change the control sett… | column | Enumeration | .1.3.6.1.4.1.476.1.42.3.10.1.1.7 |
| lgpSrcDevFanSpeed The present fan speed of the SRC device. This object will be one
of the valid fan speed: low(1), middle(2), high(3) or auto(4) if
the value of lgpSrcDevState object is set to en… | column | Enumeration | .1.3.6.1.4.1.476.1.42.3.10.1.1.8 |