lgpSrcDevId

LIEBERT-GP-SRC-MIB · .1.3.6.1.4.1.476.1.42.3.10.1.1.1

MIB view Table view

Object

column SNMPv2-SMIUnsigned32

This value must remain constant between agent initializations.
This Device ID is used as an index of the table
'lgpSrcTable'.

Context

MIB: LIEBERT-GP-SRC-MIB
OID: .1.3.6.1.4.1.476.1.42.3.10.1.1.1
Type: column
Access: readonly
Status: current
Parent: lgpSrcEntry
Table: lgpSrcTable
Siblings: 13

Syntax

SNMPv2-SMIUnsigned32

Source: SNMPv2-SMIUnsigned32
Base type: Unsigned32

Values & Constraints

Type Constraints

range: 0..4294967295

Related Objects

Sibling Objects

Object	Type	Syntax	OID
lgpSrcDevOperatingMode The present operating mode of the SRC device. This object will be one of the valid operating mode: cooling(0), dehumidify(1), fan(2), ai(3) or heating(4) if the value of lgpSrcDe…	column	Enumeration	`.1.3.6.1.4.1.476.1.42.3.10.1.1.10`
lgpSrcDevTemperatureHighThresholdDegF The high temperature notification threshold. This is the maximum value of 'lgpSrcDevTemperatureDegF' before the agent sends a notification. The value of this object is only vail…	column	degrees Fahrenheit Enumeration	`.1.3.6.1.4.1.476.1.42.3.10.1.1.11`
lgpSrcDevTemperatureLowThresholdDegF The low temperature notification threshold. This is the minimum value of 'lgpSrcDevTemperatureDegF' before the agent sends a notification. The value of this object is only vaild…	column	degrees Fahrenheit Enumeration	`.1.3.6.1.4.1.476.1.42.3.10.1.1.12`
lgpSrcDevTemperatureHighThresholdDegC The high temperature notification threshold. This is the maximum value of 'lgpSrcDevTemperatureDegC' before the agent sends a notification. The value of this object is only vail…	column	degrees Celsius Enumeration	`.1.3.6.1.4.1.476.1.42.3.10.1.1.13`
lgpSrcDevTemperatureLowThresholdDegC The low temperature notification threshold. This is the minimum value of 'lgpSrcDevTemperatureDegC' before the agent sends a notification. The value of this object is only vaild…	column	degrees Celsius Enumeration	`.1.3.6.1.4.1.476.1.42.3.10.1.1.14`
lgpSrcDevAddress This value must remain constant between agent initializations. This Device Address is used as an index of the table 'lgpSrcTable'.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.476.1.42.3.10.1.1.2`
lgpSrcDevState Indicates the current state of SRC device. The value of this object is set to enabled(1) if the SRC device has been enabled. The value of this object is set to standbyOffline(2) …	column	Enumeration	`.1.3.6.1.4.1.476.1.42.3.10.1.1.3`
lgpSrcDevTemperatureDegF The measured temperature value in Fahrenheit. The value of this object is only vaild if the lgpSrcDevState object is set to enabled(1). The value of this object will be set to u…	column	Enumeration	`.1.3.6.1.4.1.476.1.42.3.10.1.1.4`
lgpSrcDevTemperatureSetpointDegF The temperature setting in Fahrenheit for SRC. This setting may or may not be the setting used from control. Some systems have the capability to dynamically change the control s…	column	Enumeration	`.1.3.6.1.4.1.476.1.42.3.10.1.1.5`
lgpSrcDevTemperatureDegC The measured temperature value in Celsius. The value of this object is only vaild if the lgpSrcDevState object is set to enabled(1). The value of this object will be set to unkn…	column	Enumeration	`.1.3.6.1.4.1.476.1.42.3.10.1.1.6`
lgpSrcDevTemperatureSetpointDegC The temperature setting in Celsius for SRC. This setting may or may not be the setting used from control. Some systems have the capability to dynamically change the control sett…	column	Enumeration	`.1.3.6.1.4.1.476.1.42.3.10.1.1.7`
lgpSrcDevFanSpeed The present fan speed of the SRC device. This object will be one of the valid fan speed: low(1), middle(2), high(3) or auto(4) if the value of lgpSrcDevState object is set to en…	column	Enumeration	`.1.3.6.1.4.1.476.1.42.3.10.1.1.8`
lgpSrcDevPowerStatus The value of this object specifies the power status of SRC device. Power status cannot be configured by an operator. The value of this object is set to off(0) if the SRC device i…	column	Enumeration	`.1.3.6.1.4.1.476.1.42.3.10.1.1.9`