sensorUnit
LHX-MIB ·
.1.3.6.1.4.1.13742.9.1.4.1.1.5
Object
column
SensorUnitsEnumeration
The base units. This parameter does not apply to state sensors.
Context
- MIB
- LHX-MIB
- OID
.1.3.6.1.4.1.13742.9.1.4.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- sensorConfigurationEntry
- Table
- sensorConfigurationTable
- Siblings
- 16
Syntax
SensorUnitsEnumeration
- Source
- SensorUnitsEnumeration
- Base type
Enumeration
Values & Constraints
Type Values
-1 | none |
0 | other |
1 | volt |
2 | amp |
3 | watt |
4 | voltamp |
5 | wattHour |
6 | voltampHour |
7 | degreeC |
8 | hertz |
9 | percent |
10 | meterpersec |
11 | pascal |
12 | psi |
13 | g |
14 | degreeF |
15 | feet |
16 | inches |
17 | cm |
18 | meters |
19 | rpm |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portIdx A unique value for each port. Its value
ranges between 1 and the value of portCount. | column | Integer32 | .1.3.6.1.4.1.13742.9.1.4.1.1.1 |
| sensorLowerCriticalThreshold The lower critical threshold.
The value of this OID variable should be scaled by
sensorDecimalDigits. For example, if the value is 1 and
sensorDecimalDigits is 2, then actual val… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.9.1.4.1.1.10 |
| sensorLowerWarningThreshold The lower non-critical (warning) threshold.
The value of this OID variable should be scaled by
sensorDecimalDigits. For example, if the value is 1 and
sensorDecimalDigits is 2, t… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.9.1.4.1.1.11 |
| sensorUpperCriticalThreshold The upper critical threshold.
The value of this OID variable should be scaled by
sensorDecimalDigits. For example, if the value is 1 and
sensorDecimalDigits is 2, then actual va… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.9.1.4.1.1.12 |
| sensorUpperWarningThreshold The upper non-critical (warning) threshold.
The value of this OID variable should be scaled by
sensorDecimalDigits. For example, if the value is 1 and
sensorDecimalDigits is 2, t… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.9.1.4.1.1.13 |
| sensorEnabledThresholds A bit string which indicates which thresholds are enabled.
This parameter does not apply to state sensors. | column | Bits | .1.3.6.1.4.1.13742.9.1.4.1.1.14 |
| sensorThresholdMaximum The largest possible threshold value.
The value of this OID variable should be scaled by
sensorDecimalDigits. For example, if the value is 1 and
sensorDecimalDigits is 2, then ac… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.9.1.4.1.1.15 |
| sensorThresholdMinimum The smallest possible threshold value.
The value of this OID variable should be scaled by
sensorDecimalDigits. For example, if the value is 1 and
sensorDecimalDigits is 2, then a… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.9.1.4.1.1.16 |
| sensorName The descriptive ID of the sensor (e.g. Fan Speed 1). | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.9.1.4.1.1.17 |
| sensorTypeIdx A unique value for the type of sensor. | column | Integer32 | .1.3.6.1.4.1.13742.9.1.4.1.1.2 |
| sensorIdx A unique value for each sensor. Its value
ranges between 1 and the value of sensorCount. | column | Integer32 | .1.3.6.1.4.1.13742.9.1.4.1.1.3 |
| sensorLabel The short ID of the sensor (e.g. F1, M2). | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.9.1.4.1.1.4 |
| sensorDecimalDigits The number of digits displayed to the right of the decimal point.
This parameter does not apply to state sensors. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.9.1.4.1.1.6 |
| sensorMaximum The largest possible value.
The value of this OID variable should be scaled by
sensorDecimalDigits. For example, if the value is 1 and
sensorDecimalDigits is 2, then actual value… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.9.1.4.1.1.7 |
| sensorMinimum The smallest possible value.
The value of this OID variable should be scaled by
sensorDecimalDigits. For example, if the value is 1 and
sensorDecimalDigits is 2, then actual valu… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.9.1.4.1.1.8 |
| sensorHysteresis The hysteresis used for deassertions.
The value of this OID variable should be scaled by
sensorDecimalDigits. For example, if the value is 1 and
sensorDecimalDigits is 2, then ac… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.9.1.4.1.1.9 |