gwLhxOperationalStateChange
LHX-MIB ·
.1.3.6.1.4.1.13742.9.0.18
Object
notification
Operational State Change.
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| trapInformation | node | - | .1.3.6.1.4.1.13742.9.0.0 |
| lhxSensorFailure A sensor failure (broken or short circuit) occurred. | notification | - | .1.3.6.1.4.1.13742.9.0.1 |
| lhxWaterLeak Water leakage was detected. | notification | - | .1.3.6.1.4.1.13742.9.0.10 |
| lhxThresholdHumidity The humidity threshold was crossed. | notification | - | .1.3.6.1.4.1.13742.9.0.11 |
| lhxExternalWaterCoolingFailure An external water cooling failure occurred. | notification | - | .1.3.6.1.4.1.13742.9.0.12 |
| lhxThresholdWaterOutlet The water outlet temperature threshold was crossed. | notification | - | .1.3.6.1.4.1.13742.9.0.13 |
| lhxParameterDataLoss Data loss in parameter memory was detected. | notification | - | .1.3.6.1.4.1.13742.9.0.14 |
| lhxStBusError An ST-Bus communication error was detected. | notification | - | .1.3.6.1.4.1.13742.9.0.15 |
| lhxCollectiveFault An error was detected. | notification | - | .1.3.6.1.4.1.13742.9.0.16 |
| gwSensorStateChange Sensor State Change. | notification | - | .1.3.6.1.4.1.13742.9.0.17 |
| lhxVoltageLow The supply voltage of an LHX became low. | notification | - | .1.3.6.1.4.1.13742.9.0.19 |
| lhxFanFailure A fan motor failure occurred. | notification | - | .1.3.6.1.4.1.13742.9.0.2 |
| lhxBaseElectronicsFailure The base electronics of an LHX controller failed. | notification | - | .1.3.6.1.4.1.13742.9.0.20 |
| lhxCondenserPumpFailure An LHX condenser pump failed. | notification | - | .1.3.6.1.4.1.13742.9.0.21 |
| lhxPowerSupplyFailure A power supply failure occurred. | notification | - | .1.3.6.1.4.1.13742.9.0.3 |
| lhxThresholdAirOutlet The air outlet temperature threshold was crossed. | notification | - | .1.3.6.1.4.1.13742.9.0.4 |
| lhxThresholdAirInlet The air inlet temperature threshold was crossed. | notification | - | .1.3.6.1.4.1.13742.9.0.5 |
| lhxThresholdWaterInlet The water inlet temperature threshold was crossed. | notification | - | .1.3.6.1.4.1.13742.9.0.6 |
| lhxDoorOpened The door was opened. | notification | - | .1.3.6.1.4.1.13742.9.0.7 |
| lhxMaximumCoolingRequest Maximum cooling was requested. | notification | - | .1.3.6.1.4.1.13742.9.0.8 |
| lhxEmergencyCooling Emergency cooling was activated. | notification | - | .1.3.6.1.4.1.13742.9.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| deviceName The user-defined name for the Device. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.9.0.0.1 |
| RFC1213-MIBsysContact mandatory The textual identification of the contact person
for this managed node, together with information
on how to contact this person. | scalar | OctetString | .1.3.6.1.2.1.1.4 |
| RFC1213-MIBsysName mandatory An administratively-assigned name for this
managed node. By convention, this is the node's
fully-qualified domain name. | scalar | OctetString | .1.3.6.1.2.1.1.5 |
| RFC1213-MIBsysLocation mandatory The physical location of this node (e.g.,
`telephone closet, 3rd floor'). | scalar | OctetString | .1.3.6.1.2.1.1.6 |
| deviceInetAddressType The type of address format | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.13742.9.0.0.2 |
| deviceInetIPAddress The current IP address. A value of 0.0.0.0 indicates an
error or an unset option. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.13742.9.0.0.3 |
| agentInetPortNumber The UDP port number used for accessing
the SNMP agent on the device.
Examples:
If the associated device MIB (PX2-MIB, EMD-MIB) has deviceCascadeType set to portForwarding, … | scalar | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.13742.9.0.0.13 |
| portId A unique value for the physical port, the LHX controlller
is connected to.
Its value ranges between 1 and the value of portCount. | scalar | Integer32 | .1.3.6.1.4.1.13742.9.0.0.5 |
| operationalState The operational state of the lhx controller.
To switch LHX power state while controller is connected,
set operationalState to 1 (off) or 2 (on).
Switching power state while LHX is… | column | OperationalStateEnumeration | .1.3.6.1.4.1.13742.9.1.3.1.1.1 |
| oldOperationalState The old operational state used in Operational State Transition traps. | scalar | OperationalStateEnumeration | .1.3.6.1.4.1.13742.9.0.0.12 |
| deviceSerialNumber The serial number of the Device. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.9.0.0.14 |