lcsTrapDestinationConfTrapSecurityEngineID
LCOS-SX-MIB ·
.1.3.6.1.4.1.2356.14.1.6.3.1.12
Object
Indicates the SNMP trap security engine ID. SNMPv3 sends traps and informs using USM for authentication and privacy. A unique engine ID for these traps and informs is needed. When Trap Probe Security Engine ID is enabled, the ID will be probed automatically. Otherwise, the ID specified in this field is used. The string must contain an even number(in hexadecimal format) with number of digits between 10 and 64, but all-zeros and all-'F's are not allowed.
Context
- MIB
- LCOS-SX-MIB
- OID
.1.3.6.1.4.1.2356.14.1.6.3.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- lcsTrapDestinationConfEntry
- Table
- lcsTrapDestinationConfTable
- Siblings
- 9
Values & Constraints
Enumerated Values
0 | untagPortVlan |
1 | tagAll |
2 | untagAll |
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lcsTrapDestinationConfIndex Index of tarp destination configurations. | column | Integer32 | .1.3.6.1.4.1.2356.14.1.6.3.1.1 |
| lcsTrapDestinationConfTrapSecurityName Indicates the SNMP trap security name.
SNMPv3 traps and informs using USM for authentication and privacy.
A unique security name is needed when traps and informs are enabled.
This… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.1.6.3.1.13 |
| lcsTrapDestinationConfTrapRowStatus This object indicates the status of this entry, and is
used to create(5)/delete(6) entries. Any object in an entry of
this table may be modified while the value of the
correspond… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.1.6.3.1.14 |
| lcsTrapDestinationConfTrapConfigName Indicates which trap Configuration's name for configuring.
The allowed string length is 0 to 255, and the allowed content is
ASCII characters from 33 to 126. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.1.6.3.1.2 |
| lcsTrapDestinationConfTrapMode Indicates the SNMP mode operation. Possible modes are:
2: Enable TCP SNMP mode operation.
1: Enable UDP SNMP mode operation.
0: Disable SNMP mode operation. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.1.6.3.1.3 |
| lcsTrapDestinationConfTrapVersion 0: snmpv1
1: snmpv2c
3: snmpv3. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.1.6.3.1.4 |
| lcsTrapDestinationConfTrapCommunity Indicates the community access string when sending SNMP trap packet.
The allowed string length is 0 to 255, and the allowed content is
ASCII characters from 33 to 126. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.1.6.3.1.5 |
| lcsTrapDestinationConfTrapDestinationAddres Indicates the SNMP trap destination address.
It allow a valid IP address in dotted decimal notation ('x.y.z.w').
And it also allow a valid hostname.
A valid hostname is a string d… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.1.6.3.1.6 |
| lcsTrapDestinationConfTrapDestinationPort Indicates the SNMP trap destination port.
SNMP Agent will send SNMP message via this port,
the port range is 1~65535. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.1.6.3.1.7 |